Hierarchically Porous Polypyrrole Foams Contained Ordered Polypyrrole Nanowire Arrays for Multifunctional Electromagnetic Interference Shielding and Dynamic Infrared Stealth.

As modern communication and detection technologies advance at a swift pace, multifunctional electromagnetic interference (EMI) shielding materials with active/positive infrared stealth, hydrophobicity, and electric-thermal conversion ability have received extensive attention. Meeting the aforesaid requirements simultaneously remains a huge challenge. In this research, the melamine foam (MF)/polypyrrole (PPy) nanowire arrays (MF@PPy) were fabricated via one-step electrochemical polymerization.

Efficient small fragment sequencing of human, cattle, and bison miRNA, small RNA, or csRNA-seq libraries using AVITI.

Background: Next-Generation Sequencing (NGS) catalyzed breakthroughs across various scientific domains. Illumina's sequencing by synthesis method has long been central to NGS, but new sequencing methods like Element Biosciences' AVITI technology are emerging. AVITI is reported to offer improved signal-to-noise ratios and cost reductions.

Healable, Recyclable, and Ultra-Tough Waterborne Polyurethane Elastomer Achieved through High-Density Hydrogen Bonding Cross-Linking Strategy.

With the increasing popularity of elastomers in industry and daily life, their high performance and functionality have attracted widespread attention. However, it is a great challenge for them to possess both high mechanical properties and excellent healing and recovery capabilities due to the limitations of the preparation methods and the intrinsic microstructure of the elastomers. In this study, a strategy of ice-controlled interfacial stepwise cross-linking was proposed to prepare the waterborne polyurethane-based elastomers with ultrahigh-density hydrogen bonding interaction achieved by enhancing the utilization rate of phenol hydroxyl groups of tannic acid to the maximum extent.

Therapeutic applications of RNA nanostructures.

RNA-based therapeutics have gained wide public interest in recent years. RNA is a versatile molecule that exists in many forms including mRNA, siRNA, miRNA, ribozymes, and other non-coding RNAs and is primarily applied for gene therapy. RNA is also used as a modular building block to construct RNA nanostructures.

Efficient small fragment sequencing of human, cow, and bison miRNA, small RNA or csRNA-seq libraries using AVITI.

Next-Generation Sequencing (NGS) catalyzed breakthroughs across various scientific domains. Illumina's sequencing by synthesis method has long been essential for NGS but emerging technologies like Element Biosciences' sequencing by avidity (AVITI) represent a novel approach. It has been reported that AVITI offers improved signal-to-noise ratios and cost reductions.

Multifunctional MXene/PEDOT:PSS-Based Phase Change Organohydrogels for Electromagnetic Interference Shielding and Medium-Low Temperature Infrared Stealth.

Electromagnetic interference (EMI) shielding and infrared stealth technologies are essential for military and civilian applications. However, it remains a significant challenge to integrate various functions efficiently into a material efficiently. Herein, a minimalist strategy to fabricate multifunctional phase change organohydrogels (PCOHs) was proposed, which were fabricated from polyacrylamide (PAM) organohydrogels, MXene/PEDOT:PSS hybrid fillers, and sodium sulfate decahydrate (NaSO·10HO, SSD) via one-step photoinitiation strategies.

RNA Origami Functions as a Self-Adjuvanted Nanovaccine Platform for Cancer Immunotherapy.

Peptide-based vaccines have been widely investigated in cancer immunotherapy. Despite their high specificity, safety, and low production cost, these vaccines have shown limited success in clinical studies, owing to their poor immunogenicity. Extensive efforts have been devoted to increasing the immunogenicity of peptide vaccines by mixing peptides with adjuvants and/or promoting their delivery to tumor-draining lymph nodes (TdLNs) for better antigen presentation by and maturation of dendritic cells.

Prolonging the Cycle Stability of Anion Redox P3-Type NaLiMnO through AlO Atomic Layer Deposition Surface Modification.

Sodium-ion batteries (SIBs) are becoming an alternative option for large-scale energy storage systems owing to their low cost and abundance. The lattice oxygen redox (LOR), which has the potential to increase the reversible capacity of materials, has promoted the development of high-energy cathode materials in SIBs. However, the utilization of oxygen anion redox reactions usually results in harmful lattice oxygen release, which hastens structural deformation and declines electrochemical performance, severely hindering their practical application.

Single-Stranded RNA Origami-Based Epigenetic Immunomodulation.

The integration of functional modules at the molecular level into RNA nanostructures holds great potential for expanding their applications. However, the quantitative integration of nucleoside analogue molecules into RNA nanostructures and their impact on the structure and function of RNA nanostructures remain largely unexplored. Here, we report a transcription-based approach to controllably integrate multiple nucleoside analogues into a 2000 nucleotide (nt) single-stranded RNA (ssRNA) origami nanostructure.

Edge Length-Programmed Single-Stranded RNA Origami for Predictive Innate Immune Activation and Therapy.

Ligands targeting nucleic acid-sensing receptors activate the innate immune system and play a critical role in antiviral and antitumoral therapy. However, ligand design for stability, targeted delivery, and predictive immunogenicity is largely hampered by the sophisticated mechanism of the nucleic acid-sensing process. Here, we utilize single-stranded RNA (ssRNA) origami with precise structural designability as nucleic acid sensor-based ligands to achieve improved biostability, organelle-level targeting, and predictive immunogenicity.

DNA Origami Tessellations.

Molecular tessellation research aims to elucidate the underlying principles that govern intricate patterns in nature and to leverage these principles to create precise and ordered structures across multiple scales, thereby facilitating the emergence of novel functionalities. DNA origami nanostructures are excellent building blocks for constructing tessellation patterns. However, the size and complexity of DNA origami tessellation systems are currently limited by several unexplored factors relevant to the accuracy of essential design parameters, the applicability of design strategies, and the compatibility between different tiles.

Two-Dimensional Excitonic Networks Directed by DNA Templates as an Efficient Model Light-Harvesting and Energy Transfer System.

Photosynthetic organisms organize discrete light-harvesting complexes into large-scale networks to facilitate efficient light collection and utilization. Inspired by nature, herein, synthetic DNA templates were used to direct the formation of dye aggregates with a cyanine dye, K21, into discrete branched photonic complexes, and two-dimensional (2D) excitonic networks. The DNA templates ranged from four-arm DNA tiles, ≈10 nm in each arm, to 2D wireframe DNA origami nanostructures with different geometries and varying dimensions up to 100×100 nm.

Epicoccanes A-D, Four Oxidative Dimers of Pyrogallol Analogues from .

Epicoccanes A-D (-) are four novel metabolites of an endophytic fungus . Their distinct unprecedented structures are hypothesized as oxidative dimers of pyrogallol analogues. Compounds and possess a novel spirobicyclo[3.

Ultraflexible PEDOT:PSS/Helical Carbon Nanotubes Film for All-in-One Photothermoelectric Conversion.

Photothermoelectric (PTE) conversion can achieve the recovery of low-quality light or heat efficiently. Much effort has been devoted to the exploitation of the inorganic heterogeneous asynchronous (separate) PTE conversion system. Here, a full organic PTE film with a pseudobilayer architecture (PBA) according to the homogeneous synchronous (all-in-one) PTE conversion hypothesis was prepared via successive drop-casting a PEDOT:PSS/helical carbon nanotube (HCNT) mixture and PEDOT:PSS onto a vacuum ultraviolet treated substrate.

Fabricating High-Thermal-Conductivity, High-Strength, and High-Toughness Polylactic Acid-Based Blend Composites Constructing Multioriented Microstructures.

The massive accumulation of plastic waste has caused a serious negative impact on the human living environment. Replacing traditional petroleum-based polymers with biobased and biodegradable poly(l-lactic acid) (PLLA) is considered an effective way to solve this problem. However, it is still a great challenge to manufacture PLLA-based composites with high thermal conductivity and excellent mechanical properties via tailoring the microstructures of the blend composites.

A nomogram for decision-making assistance on surgical treatment of chronic osteomyelitis in long bones: Establishment and validation based on a retrospective multicenter cohort.

Background: Chronic osteomyelitis remains a major challenge for orthopedic surgeons due to its high recurrence rate. Surgeons currently have few tools to estimate the likelihood of individual recurrence. We here aimed to develop a nomogram to better estimate individual recurrence rate after surgical treatment of chronic osteomyelitis in long bones.

Multifunctional Phase Change Composites Based on Elastic MXene/Silver Nanowire Sponges for Excellent Thermal/Solar/Electric Energy Storage, Shape Memory, and Adjustable Electromagnetic Interference Shielding Functions.

Multifunctional phase change materials (PCMs) are highly desirable for the thermal management of miniaturized and integrated electronic devices. However, the development of flexible PCMs possessing heat energy storage, shape memory, and adjustable electromagnetic interference (EMI) shielding properties under complex conditions remains a challenge. Herein, the multifunctional PCM composites were prepared by encapsulating poly(ethylene glycol) (PEG) into porous MXene/silver nanowire (AgNW) hybrid sponges by vacuum impregnation.

Polypyrrole/Helical Carbon Nanotube Composite with Marvelous Photothermoelectric Performance for Longevous and Intelligent Internet of Things Application.

Helical carbon nanotube (HCNT) is a vital member of carbon nanomaterials, but little effort was devoted to explore its unique characteristics and applications during the past few decades. Here, we report an organic thermoelectric composite with an excellent photothermoelectric (PTE) effect by conformally wrapping polypyrrole (PPy) on the intricate surface of HCNTs, which have been confirmed to have remarkable near-infrared (NIR) photothermal conversion capability and ultralow heat transportation characteristics. The results indicate that with the increasing HCNT content, PPy shell thickness reduces and exhibits denser as well as partial orientation, while the inter-ring angle slowly decreases and the bipolaron becomes dominant in carrier composition gradually.

Constructing cellulose nanocrystal/graphene nanoplatelet networks in phase change materials toward intelligent thermal management.

The hybrid networks of cellulose nanocrystals (CNCs) and graphene nanoplatelets (GNPs) were constructed in polyethylene glycol (PEG) through the common solution compounding processing, in which GNPs provided the thermally conductive path while CNCs restricted the leakage of PEG during the phase transition. The results showed that CNCs greatly enhanced the shape stability of the composite phase change materials (PCMs) while thermal conductivity was still maintained at high level. At the contents of 8 wt% (CNCs) and 4 wt% (GNPs), the enthalpy of the composite PCM was 145.

Provision of rapid and specific ex vivo diagnosis of central nervous system lymphoma from rodent xenograft biopsies by a fluorescent aptamer.

Objective: Differentiating central nervous system (CNS) lymphoma from other intracranial malignancies remains a clinical challenge in surgical neuro-oncology. Advances in clinical fluorescence imaging contrast agents and devices may mitigate this challenge. Aptamers are a class of nanomolecules engineered to bind cellular targets with antibody-like specificity in a fraction of the staining time.

RNA Origami Nanostructures for Potent and Safe Anticancer Immunotherapy.

Rapid developments in nucleic acid nanotechnology have enabled the rational design and construction of self-assembling DNA and RNA nanostructures that are highly programmable. We recently developed a replicable single-stranded RNA origami (RNA-OG) technology that allows a long RNA molecule to be programmed to self-assemble into nanostructures of various shapes. Here, we show that such RNA-OG is highly stable in serum/plasma, and we thus exploited its immunostimulatory potential.

Melamine foam and cellulose nanofiber co-mediated assembly of graphene nanoplatelets to construct three-dimensional networks towards advanced phase change materials.

Organic phase change materials (OPCMs) play a great role in energy management owing to their large phase change enthalpy, but their intrinsic low thermal conductivity (TC) and bad encapsulation severely restrict their applications. To overcome these problems, we developed a novel but feasible method to fabricate a graphene nanoplatelet (GNP) aerogel with compact and oriented stacking in-plane walls and many through-plane bridges via melamine foam (MF) and cellulose nanofiber (CNF) co-mediated assembly of GNPs. After impregnating paraffin wax (PW), the composite PCMs exhibit a high TC of 1.

Multiresponsive Shape-Adaptable Phase Change Materials with Cellulose Nanofiber/Graphene Nanoplatelet Hybrid-Coated Melamine Foam for Light/Electro-to-Thermal Energy Storage and Utilization.

Strong rigidity, low thermal conductivity, and short of multi-driven capabilities of form-stable phase change materials (FSPCMs) have limited their practical utilization. Herein, we report a shape-adaptable FSPCM with the coinstantaneous light/electro-driven shape memory properties and light/electro-to-thermal energy storage performance. The FSPCM is fabricated by incorporating the poly(ethylene glycol) (PEG) into the cellulose nanofiber/graphene nanoplatelet (GNP) hybrid-coated melamine foam (CG@MF).