Spatiotemporal evolution characteristics and attribution analysis of hepatitis A in mainland China.

This study aimed to analyze the epidemiological characteristics and spatiotemporal clustering of hepatitis A in mainland China from 2004 to 2019 and to evaluate the practical impact of integrating hepatitis A vaccines into the Expanded Program on Immunization (EPI). Spatial and temporal autocorrelation and spatiotemporal scanning statistics were used to perform spatial and temporal characterization to quantify the spatial similarity or degree of aggregation of geographic data, and Geographical and Temporal Weighted Regression (GTWR) models were used to reveal spatial and temporal heterogeneity in the relationships between variables to test for spatial and temporal outbreaks of disease and other factors, such as socio-economic factors. Spatially, the incidence rates exhibited a west-high and east-low spatial differentiation, with the High-High (HH) clusters predominantly located in the western regions, maintaining stability butgradually diminishing.

Fabrication of azido-PEG-NHC stabilized gold nanoparticles as a functionalizable platform.

Rapid and precise detection of biochemical markers is vital for accurate medical diagnosis. Gold nanoparticles (AuNPs) have emerged as promising candidates for diagnostic sensing due to their biocompatibility and distinctive physical properties. However, AuNPs functionalized with selective targeting vectors often suffer from reduced stability in complex biological environments.

Bioaerosol Inactivation by a Cold Plasma Ionizer Coupled with an Electrostatic Precipitator.

Despite best efforts in air purification, airborne infectious diseases will continue to spread due to the continuous emission of bioaerosols by the host/infected person. Hence, a shift in focus from air purification to bioaerosol inactivation is urgently needed. To explore the potential of the cold plasma technology for preventing rapid spread of airborne infectious diseases, we studied a cold plasma ionizer (CPI) device and an electrostatic precipitator (ESP)-coupled CPI (CPI-ESP) device for the inactivation and cleaning of surface-spread microorganisms and bioaerosols, using porcine respiratory coronavirus (PRCV), (), and aerosolized as representatives.

Near-Infrared-Light-Induced Iron(I) Dimer-Enabled Radical Cascade Reactions of Fluoroalkyl Bromides for the Synthesis of Ring-Fused Quinazolinones.

The use of an earth-abundant and inexpensive iron complex as a catalyst, coupled with near-infrared (NIR) light as the energy source, for radical reactions with alkyl halides has been far less developed. In this study, we report NIR light-mediated iron(I) dimer-catalyzed radical cascade reactions of fluoroalkyl bromides for the synthesis of ring-fused quinazolinones bearing a difluoromethyl group. In this process, the 3-bromo-1,10-phenanthroline ligand facilitates the reactivity of [CpFe(CO)], thereby improving the efficiency of the reaction.

A Gold Nanoparticle-Based Cortisol Aptasensor for Non-Invasive Detection of Fish Stress.

Cortisol is a key stress biomarker in humans and animals, including fishes. In aquafarming, stress monitoring using cortisol quantification can help to optimize aquaculture practices for welfare and productivity enhancement. However, most current methods for cortisol detection rely on invasive tissue sampling.

A Rapid Total Bacterial Count Method for Food Samples using Syringe Filters and Lectin-Conjugated Semiconductor Nanorods.

Total bacterial count in food is one of important food safety criteria. The current plate count method (Heterotrophic Plate Count) for food analysis requires microbiology lab facilities and at least 2 days turnover time. We developed a rapid fluorescence-based total bacterial count method that utilises semiconductor nanorods (SNRs) conjugated with a lectin Griffonia simplicifolia II (GSII-SNRs) to stain bacterial cells captured on syringe filters, via the common N-acetylglucosamine molecules on bacterial cell wall.

A Genetic Algorithm for Universal Optimization of Ultrasensitive Surface Plasmon Resonance Sensors with 2D Materials.

We present a general optimization technique for surface plasmon resonance, (SPR) yielding a range of ultrasensitive SPR sensors from a materials database with an enhancement of ∼100%. Applying the algorithm, we propose and demonstrate a novel dual-mode SPR structure coupling SPP and a waveguide mode within GeO featuring an anticrossing behavior and an unprecedented sensitivity of 1364 deg/RIU. An SPR sensor operating at wavelengths of 633 nm having a bimetal Al/Ag structure sandwiched between hBN can achieve a sensitivity of 578 deg/RIU.

Understanding COVID-19: comparison of spatio-temporal analysis methods used to study epidemic spread patterns in the United States.

This article examines three spatiotemporal methods used for analyzing of infectious diseases, with a focus on COVID-19 in the United States. The methods considered include inverse distance weighting (IDW) interpolation, retrospective spatiotemporal scan statistics and Bayesian spatiotemporal models. The study covers a 12-month period from May 2020 to April 2021, including monthly data from 49 states or regions in the United States.

Greatly Enhanced Resonant Exciton-Trion Conversion in Electrically Modulated Atomically Thin WS at Room Temperature.

Excitonic resonance in atomically thin semiconductors offers a favorite platform to study 2D nanophotonics in both classical and quantum regimes and promises potentials for highly tunable and ultra-compact optical devices. The understanding of charge density dependent exciton-trion conversion is the key for revealing the underlaying physics of optical tunability. Nevertheless, the insufficient and inefficient light-matter interactions hinder the observation of trionic phenomenon and the development of excitonic devices for dynamic power-efficient electro-optical applications.

Carbon Dot-Doped Hydrogel Sensor Array for Multiplexed Colorimetric Detection of Wound Healing.

Effective wound care and treatment require a quick and comprehensive assessment of healing status. Here, we develop a carbon dot-doped hydrogel sensor array in polydimethylsiloxane (PDMS) for simultaneous colorimetric detections of five wound biomarkers and/or wound condition indicators (pH, glucose, urea, uric acid, and total protein), leading to the holistic assessment of inflammation and infection. A biogenic carbon dot synthesized using an amino acid and a polymer precursor is doped in an agarose hydrogel matrix for constructing enzymatic sensors (glucose, urea, and uric acid) and dye-based sensors (pH and total protein).

Antibody conjugated Au/Ir@Cu/Zn-MOF probe for bacterial lateral flow immunoassay and precise synergistic antibacterial treatment.

Staphylococcus aureus is one of the most prevalent threats to public health. Rapid detection with high sensitivity and targeted killing is crucial to curb its spread. Herein, a metal-bearing nanocomposite, consisting of a bimetallic nanoparticle and a metal-organic framework (Au/Ir@Cu/Zn-MOF) was constructed.

Stimuli-Activable Metal-Bearing Nanomaterials and Precise On-Demand Antibacterial Strategies.

Bacterial infections remain the leading cause of death worldwide today. The emergence of antibiotic resistance has urged the development of alternative antibacterial technologies to complement or replace traditional antibiotic treatments. In this regard, metal nanomaterials have attracted great attention for their controllable antibacterial functions that are less prone to resistance.

Celebrating 25 Years of IMRE: Research Highlights on Nanomaterials and Nanotechnologies.

The Institute of Materials Research and Engineering (IMRE) is a research institute of the Science and Engineering Research Council (SERC), Agency for Science, Technology and Research (A*STAR). IMRE was established in September 1997. Over the past 25 years, IMRE has developed core competencies and interdisciplinary teams for material development from fundamental discoveries to industrial translation.

Detecting bacterial infections in wounds: a review of biosensors and wearable sensors in comparison with conventional laboratory methods.

Bacterial infection is a common impediment towards wound healing. Detecting bacterial infections is important to promote wound healing and curb chronic non-healing wounds. In this review, we firstly discuss bacterial communities, including aerobic and anaerobic bacteria in various types of wounds.

A portable SERS sensor for pyocyanin detection in simulated wound fluid and through swab sampling.

A portable surface-enhanced Raman spectroscopy (SERS) sensor for detecting pyocyanin (PYO) in simulated wound fluid and from bacteria samples was developed. Solution-phase SERS detection protocols are designed to be compatible with two different clinical practices for wound exudate collection, namely negative pressure liquid collection and swabbing. For citrate-coated metal nanoparticles of three different compositions, gold (AuNPs), alloyed silver/gold (AgAuNPs), and silver (AgNPs), we firstly confirmed their interaction with PYO in the complex wound fluid, using fluorescence quenching experiments, which rationalized the Raman enhancement effects.

Additive-Free, Visible-Light-Enabled Decarboxylative Alkylation of Enamides.

Enamides are versatile precursors for synthesizing bioactive compounds. As their alkylations often require perstoichiometric amounts of oxidants, transition metals, or photocatalysts, we herein report a simple alternative for their alkylations by just using visible light to irradiate the mixture of the readily available -hydroxyphthalimide esters and enamides without an additive. The reaction involves the photoactivation of a π-π stacking EDA complex between the substrates.

Visible-Light-Induced Selective Photolysis of Phosphonium Iodide Salts for Monofluoromethylations.

The sigma (σ)-hole effect has emerged as a promising tool to construct novel architectures endowed with new properties. A simple yet effective strategy for the generation of monofluoromethyl radicals is a continuing challenge within the synthetic community. Fluoromethylphosphonium salts are easily available, air- and thermally stable, as well as simple-to-handle.

Structure-selective differentiation of deletion mutations in circulating tumor DNA using dual probe-based isothermal amplification.

A rapid dual probe-based fluorimetric assay was developed to detect deletion mutations in circulating tumor DNA using structure-selective isothermal amplification and pattern recognition. This method could detect both homozygous and heterozygous deletion configurations in a one-set experiment and achieved picomolar detection limits with high selectivity within 2 hours. It was promising for point-of-care cancer diagnosis in hospital settings.

Epitope-Functionalized Gold Nanoparticles for Rapid and Selective Detection of SARS-CoV-2 IgG Antibodies.

Rapid and inexpensive immunodiagnostic assays to monitor severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) seroconversion are essential for conducting large-scale COVID-19 epidemiological surveillance and profiling humoral responses against SARS-CoV-2 infections or immunizations. Herein, a colorimetic serological assay to detect SARS-CoV-2 IgGs in patients' plasma was developed using short antigenic epitopes conjugated to gold nanoparticles (AuNPs). Four immunodominant linear B-cell epitopes, located on the spike (S) and nucleocapsid (N) proteins of SARS-CoV-2, were characterized for their IgG binding affinity and used as highly specific biological motifs on the nanoparticle to recognize target antibodies.

Lithographic Processes for the Scalable Fabrication of Micro- and Nanostructures for Biochips and Biosensors.

Since the early 2000s, extensive research has been performed to address numerous challenges in biochip and biosensor fabrication in order to use them for various biomedical applications. These biochips and biosensor devices either integrate biological elements (e.g.

Sensors and Analytical Technologies for Air Quality: Particulate Matters and Bioaerosols.

Particulate matters (PMs), e. g. dusts, fibres, smokes, fumes, mists, liquid droplets and airborne respirable solid or liquid particles, are the major sources of air pollution concerning outdoor and indoor air quality.