Preparation of dental resin composites with anti-bacterial adhesion against Streptococcus mutans using fluorinated and silicon containing dimethacrylates.

Objective: The purpose of this study was to enhance the anti-bacterial adhesion effect against Streptococcus mutans (S. mutans) of fluorinated dimethacrylate (DF MA) based dental resin composites (DRCs) by using silicone dimethacrylate (SMA-MEO).

Method: The SMA-MEO was added into mixture of DFMA and tricyclo (5.

Performance of low shrinkage Bis-EFMA based bulk-fill dental resin composites.

Objectives: The purpose of this study was evaluating the performance of new Bis-EFMA based bulk-fill composites with common methacrylate based composites and commercial dental composites.

Methods: The Bis-EFMA monomer was synthesized and the novel Bis-EFMA based bulk-fill composites were prepared. The resin composite samples were co-cultured with human gingival epithelial cells and human dental pulp stem cells to test the biocompatibility.

A low-shrinkage-stress and anti-bacterial adherent dental resin composite: physicochemical properties and biocompatibility.

Polymerisation shrinkage and biofilm accumulation are the two main problems associated with dental resin composites (DRCs) that induce secondary caries, which can cause restoration failure. Polymerisation shrinkage can lead to microleakage gaps between the tooth and the DRCs, causing the aggregation of bacteria and development of secondary caries. Reducing the shrinkage stress (SS) and improving the resistance to bacterial adhesion have always been the focus of this field in modifying DRCs.

Expert consensus on digital guided therapy for endodontic diseases.

Digital guided therapy (DGT) has been advocated as a contemporary computer-aided technique for treating endodontic diseases in recent decades. The concept of DGT for endodontic diseases is categorized into static guided endodontics (SGE), necessitating a meticulously designed template, and dynamic guided endodontics (DGE), which utilizes an optical triangulation tracking system. Based on cone-beam computed tomography (CBCT) images superimposed with or without oral scan (OS) data, a virtual template is crafted through software and subsequently translated into a 3-dimensional (3D) printing for SGE, while the system guides the drilling path with a real-time navigation in DGE.

Biomaterial scaffolds in maxillofacial bone tissue engineering: A review of recent advances.

Maxillofacial bone defects caused by congenital malformations, trauma, tumors, and inflammation can severely affect functions and aesthetics of maxillofacial region. Despite certain successful clinical applications of biomaterial scaffolds, ideal bone regeneration remains a challenge in maxillofacial region due to its irregular shape, complex structure, and unique biological functions. Scaffolds that address multiple needs of maxillofacial bone regeneration are under development to optimize bone regeneration capacity, costs, operational convenience.

Predicting case difficulty in endodontic microsurgery using machine learning algorithms.

Objectives: The study aimed to develop and validate machine learning models for case difficulty prediction in endodontic microsurgery, assisting clinicians in preoperative analysis.

Methods: The cone-beam computed tomographic images were collected from 261 patients with 341 teeth and used for radiographic examination and measurement. Through linear regression (LR), support vector regression (SVR), and extreme gradient boosting (XGBoost) algorithms, four models were established according to different loss functions, including the L1-loss LR model, L2-loss LR model, SVR model and XGBoost model.

Low shrinkage bulk-filled dental resin composites with non-estrogenic dimethacrylate.

This study synthesized and characterized different proportions of nonestrogenic di(meth)acrylate 9,9-bis[4-((2-(2-methacryloyloxy)ethyl-carbamate)ethoxy)phenyl] fluorine (Bis-EFMA)-based resin composite systems to study their physical, chemical, optical and biological characteristics, and adhesive properties after bonding to a tooth. The estrogenic activity of raw materials was evaluated and compared with estrogen and commercial bisphenol A. After photopolymerization, all resin composite systems were prepared, and their properties were systematically investigated.

A novel model to evaluate the fatigue resistance of NiTi instruments: Rotational and axial movement at body temperature.

To develop a model to test cyclic fatigue resistance of TruNatomy instruments undergoing rotational and axial movement at body temperature. A total of 288 Prime and Medium instruments were subjected to cyclic fatigue testing in simulated canals (at 37°C) using a model with either rotational movement only or rotational and axial movement simultaneously. Two different sized canals and three different types of curvatures were tested for each instrument (30/0.

Combined Application of Virtual Simulation Technology and 3-Dimensional-Printed Computer-Aided Rapid Prototyping in Autotransplantation of a Mature Third Molar.

The use of computer-aided rapid prototyping (CARP) models was considered to reduce surgical trauma and improve outcomes when autotransplantation of teeth (ATT) became a viable alternative for dental rehabilitation. However, ATT is considered technique-sensitive due to its series of complicated surgical procedures and unfavorable outcomes in complex cases. This study reported a novel autotransplantation technique of a 28-year-old patient with an unrestorable lower first molar (#36) with double roots.

Preparation of Bis-GMA free dental resin composites with anti-adhesion effect against Streptococcus mutans using synthesized fluorine-containing methacrylate (DFMA).

With purpose of preparing Bis-GMA free dental resin composites (DRCs) with anti-adhesion effect against Streptococcus mutans (S. mutans), a new fluorinated dimethacrylate (DFMA) was synthesized and used as base resin of DRCs. Two reactive diluents TEGDMA and SR833s were mixed with DFMA separately to prepare resin matrixes.

Machine learning models for prognosis prediction in endodontic microsurgery.

Objectives: This study aimed to establish and validate machine learning models for prognosis prediction in endodontic microsurgery, avoiding treatment failure and supporting clinical decision-making.

Methods: A total of 234 teeth from 178 patients were included in this study. We developed gradient boosting machine (GBM) and random forest (RF) models.

A comparative study of dentinal tubule penetration and the retreatability of EndoSequence BC Sealer HiFlow, iRoot SP, and AH Plus with different obturation techniques.

Objectives: This study aimed to evaluate dentinal tubule penetration and the retreatability of EndoSequence BC Sealer HiFlow (HiFlow), iRoot SP, and AH Plus when using the single-cone (SC) or continuous wave condensation (CWC) technique.

Materials And Methods: Sixty-five single-rooted teeth were instrumented and randomly divided into 5 groups: group 1, AH Plus/CWC; group 2, iRoot SP/CWC; group 3, iRoot SP/SC; group 4, HiFlow/CWC; and group 5, HiFlow/SC. The ability to re-establish patency during endodontic retreatment was recorded, as was the time taken to reach the working length.

Cone beam computed tomography analysis of accessory canals of the canalis sinuosus: A prevalent but often overlooked anatomical variation in the anterior maxilla.

Statement Of Problem: Accessory canals of the canalis sinuosus, a bony canal carrying the anterior superior alveolar nerve and vessels, can often be present but overlooked in the anterior maxilla. Dental implant placement in this area may damage neurovascular branches if this anatomic variation is not carefully identified, resulting in unexpected complications.

Purpose: The purpose of this retrospective study was to identify accessory canals of the canalis sinuosus and analyze their relationship to the terminal canalis sinuosus and anterior maxilla in Chinese patients to provide a warning for surgeons operating in the anterior maxilla.

Effect of Curvature Location on Fatigue Resistance of Five Nickel-titanium Files Determined at Body Temperature.

Introduction: The purpose of this study was to evaluate the effect of 5 different curvature locations on the fatigue resistance of thermomechanically treated nickel-titanium (NiTi) files and superelastic NiTi files at body temperature and to document the corresponding phase transformations.

Methods: EndoSequence (ES; Brasseler USA, Savannah, GA), EndoSequence CM (ESCM, Brasseler USA), K3 (SybronEndo, Orange, CA), K3XF (SybronEndo), and Vortex Blue (VB; Dentsply Tulsa Dental Specialties, Tulsa, OK) NiTi files (size 25/.04) were subjected to fatigue tests inside customized artificial canals containing a curvature of 60° and a 3-mm radius.

Effect of canal curvature location on the cyclic fatigue resistance of reciprocating files.

Objectives: To determine the effect of the location of the canal curvature on the fatigue resistance of WaveOne (WO), WaveOne Gold (WOG), Reciproc (Rec), and Reciproc Blue (RecB) files, and to examine the phase transformation behaviors of the reciprocating file systems.

Material And Methods: The instruments were subjected to fatigue testing in five artificial canals with a curvature of 60° angle and a 3-mm radius. The location of the curvature was unique for each canal.

Effect of Long-term Exposure to Peptides on Mono- and Multispecies Biofilms in Dentinal Tubules.

Introduction: The aim of this study was to evaluate the antibiofilm effectiveness of 2% chlorhexidine (CHX) and peptides 1018 and DJK-5 used either alone or in a mixture (peptide and 2% CHX) against Enterococcus faecalis and multispecies biofilms in dentin canals after short-term and long-term exposure.

Methods: One hundred eighty dentin blocks were prepared and filled with E. faecalis or multispecies bacteria by centrifugation.

Fatigue resistance of ProTaper gold exposed to high-concentration sodium hypochlorite in double curvature artificial canal.

This study aimed to evaluate and compare the fatigue resistance of ProTaper Gold (PTG) and ProTaper Universal (PTU) in artificial single and double curvature canals in 5% sodium hypochlorite (NaOCl) at body temperature (37 °C). PTG and PTU files (size F1) were subjected to fatigue tests in two different artificial ceramic canals. The single curvature model had a 60° curvature angle with a 5 mm radius.

Modeling Oral Multispecies Biofilm Recovery After Antibacterial Treatment.

Recovery of multispecies oral biofilms is investigated following treatment by chlorhexidine gluconate (CHX), iodine-potassium iodide (IPI) and Sodium hypochlorite (NaOCl) both experimentally and theoretically. Experimentally, biofilms taken from two donors were exposed to the three antibacterial solutions (irrigants), respectively, for 10 minutes. We observe that (a) live bacterial cell ratios decline for a week after the exposure and the trend then reverses beyond the week; after fifteen weeks, live bacterial cell ratios in biofilms fully return to their pretreatment levels; (b) NaOCl is shown as the strongest antibacterial agent for the oral biofilms; (c) multispecies oral biofilms from different donors showed no difference in their susceptibility to all the bacterial solutions.

Corrigendum to "Biomarker MicroRNAs for Diagnosis of Oral Squamous Cell Carcinoma Identified Based on Gene Expression Data and MicroRNA-mRNA Network Analysis".

[This corrects the article DOI: 10.1155/2017/9803018.].

Selective activities of STAMPs against .

The present study aimed to design, synthesize and screen specifically targeted antimicrobial peptides (STAMPs) that can selectively kill () in the biofilm, and to detect protein metabolism, in order to investigate the mechanism of the antibacterial functions of STAMPs against . A series of STAMPs were synthesized, and their effects on the selective antibacterial activity of on single species and multi-species biofilms under the condition of the planktonic state were studied. The total protein of was extracted before and after C11H, and matrix-assisted laser adsorption ionization-time of flight mass spectrometry identification was performed.

Low Environmental Temperature Influences the Fatigue Resistance of Nickel-titanium Files.

Introduction: The purpose of this study was to evaluate the effect of different temperatures (0°C, 10°C, 22°C, 37°C, and 60°C) on the cyclic fatigue life of nickel-titanium (NiTi) files using a new fatigue test model in zirconium oxide.

Methods: Three superelastic NiTi files (EndoSequence [Brasseler USA, Savannah, GA], ProFile [Dentsply Tulsa Dental Specialties, Tulsa, OK], and K3 [SybronEndo, Orange, CA]), and 3 heat-treated (K3XF [SybronEndo], Vortex [Dentsply Tulsa Dental Specialties], and HyFlex CM [Coltene-Whaledent, Allstetten, Switzerland]) NiTi files, all size 25/.04, were subjected to cyclic fatigue tests inside a novel, artificial ceramic canal with a curvature of 60° and a 5-mm radius.

Biomarker MicroRNAs for Diagnosis of Oral Squamous Cell Carcinoma Identified Based on Gene Expression Data and MicroRNA-mRNA Network Analysis.

Oral squamous cell carcinoma is one of the most malignant tumors with high mortality rate worldwide. Biomarker discovery is critical for early diagnosis and precision treatment of this disease. MicroRNAs are small noncoding RNA molecules which often regulate essential biological processes and are good candidates for biomarkers.

Fatigue Resistance of Nickel-titanium Instruments Exposed to High-concentration Hypochlorite.

Introduction: The purpose of this study was to introduce a new fatigue test model that simulates the clinical situation for evaluating the corrosion effect of 5.25% sodium hypochlorite (NaOCl) on nickel-titanium (NiTi) files and to evaluate the effect of 3 different temperatures (22°C, 37°C, and 60°C) on the cyclic fatigue of these files.

Methods: Three NiTi files (size 25/.

Evaluation of the Susceptibility of Multispecies Biofilms in Dentinal Tubules to Disinfecting Solutions.

Introduction: The present study evaluated the effect of the source of biofilm bacteria on their susceptibility in dentinal tubules to disinfecting solutions using an infected dentin model.

Methods: Infected dentin blocks were prepared. Enterococcus faecalis strains VP3-181 and Gel 31 were introduced into dentinal tubules by centrifugation to form monospecies biofilms, whereas 3 specimens of pooled plaque bacteria collected from different donors were used to grow multispecies biofilms in dentin.

Fatigue Resistance of a 3-dimensional Conforming Nickel-Titanium Rotary Instrument in Double Curvatures.

Introduction: Fatigue resistance of ProFile, Vortex Blue, and TRUShape files in artificial single curvature and in 2 different artificial double curvature canals was evaluated.

Methods: Three files (ProFile, Vortex Blue [size 20/.06], and TRUShape [size 20/.