Publications by authors named "Xiangang Luo"

The manipulation of vector optical fields in three-dimensional (3D) space plays a vital role in both fundamental research and practical implementations of polarization optics. However, existing studies mostly focus on 3D vector optical fields with limited modes. Here, an approach of spin-decoupled spatial partitioning is proposed to generate complex 3D vector optical fields with a customizable number of modes on demand.

View Article and Find Full Text PDF

Non-local metasurface supporting geometric phases at bound states in the continuum (BIC) simultaneously enables sharp spectral resonances and spatial wavefront shaping, thus providing a diversified optical platform for multifunctional devices. However, a static nonlocal metasurface cannot manipulate multiple degrees of freedom (DOFs), making it difficult to achieve multifunctional integration and be applied in different scenarios. Here, we presented and demonstrated phase-change non-local metasurfaces that can realize dynamic manipulation of multiple DOFs including resonant frequency, values, band, and spatial wavefront.

View Article and Find Full Text PDF
Article Synopsis
  • Asymmetric spin-orbit interaction (ASOI) enhances traditional metasurfaces by overcoming symmetry limitations, enabling advancements in applications like holography and complex light manipulation.
  • * The study shows that ASOI can be achieved with meta-atoms that have rotational symmetry (C3), improving efficiency compared to commonly used C2 meta-atoms due to reduced sensitivity to structural size.
  • * The researchers demonstrated a spin-decoupled beam deflector and hologram device with an impressive average diffraction efficiency of about 84% over a wide wavelength range, paving the way for more efficient and versatile meta-devices.
View Article and Find Full Text PDF
Article Synopsis
  • - A new camouflage device has been developed that works effectively in both visible (VIS) and infrared (IR) light, featuring an upper layer for VIS camouflage and a lower electrochromic IR layer.
  • - The upper layer consists of polystyrene nanospheres (PSNSs) that can be sized to produce various colors, while the lower layer uses multiwall carbon nanotubes (MWCNTs) for IR functionality and to allow for adjustable IR emissions.
  • - The prototype shows promising results, achieving colors like blue and green, with adjustable IR emissivity and good durability, as well as water-repellent properties, aiming to enhance camouflage technology and energy conservation applications.
View Article and Find Full Text PDF

Non-line-of-sight (NLOS) imaging aims at recovering hidden objects located beyond the traditional line of sight, with potential applications in areas such as security monitoring, search and rescue, and autonomous driving. Conventionally, NLOS imaging requires raster scanning of laser pulses and collecting the reflected photons from a relay wall. High-time-resolution detectors obtain the flight time of photons undergoing multiple scattering for image reconstruction.

View Article and Find Full Text PDF
Article Synopsis
  • Windows are key for cutting energy use and greenhouse gas emissions, but achieving the right balance between natural light and energy savings is often overlooked.
  • A new Janus glazing technology allows for switching between cooling and heating while still letting in adequate natural light, boasting impressive properties like 0.47 visible light transmittance, and high reflectivity and emissivity values for different temperature modes.
  • Outdoor tests show that Janus windows can cool rooms down by 7.1°C and slightly warm them by 0.4°C compared to standard windows, potentially saving 13%-53% of energy use in buildings and keeping surfaces clear of fog for better sunlight access in winter.
View Article and Find Full Text PDF

Structured light three-dimensional (3D) imaging technology captures the geometric information on 3D objects by recording waves reflected from the objects' surface. The projection angle and point number of the laser dots directly determine the field-of-view (FOV) and the resolution of the reconstructed image. Conventionally, diffractive optical elements with micrometer-scale pixel size have been used to generate laser dot arrays, leading to limited FOV and point number within the projection optical path.

View Article and Find Full Text PDF
Article Synopsis
  • The SARS-CoV-2 virus has significantly impacted human health and the global economy, emphasizing the need for effective detection methods.
  • Researchers introduced a multilayered plasmonic nanotrap (MPNT) device that utilizes surface-enhanced Raman scattering (SERS) to identify single SARS-CoV-2 virus particles with high sensitivity.
  • The MPNT device can detect the virus's N protein at extremely low concentrations (as low as 1.25 × 10^−12 g/mL) within just one minute, and its design allows for future use against various infectious viruses.
View Article and Find Full Text PDF

Simultaneous circular dichroism and wavefront manipulation have gained considerable attention in various applications, such as chiroptical spectroscopy, chiral imaging, sorting and detection of enantiomers, and quantum optics, which can improve the miniaturization and integration of the optical system. Typically, structures with n-fold rotational symmetry ( ≥ 3) are used to improve circular dichroism, as they induce stronger interactions between the electric and magnetic fields. However, manipulating the wavefront with these structures remains challenging because they are commonly considered isotropic and lack a geometric phase response in linear optics.

View Article and Find Full Text PDF

Quasi-continuous-phase metasurfaces overcome the side effects imposed by high-order diffraction on imaging and can impart optical parameters such as amplitude, phase, polarization, and frequency to incident light at sub-wavelength scales with high efficiency. Structured-light three-dimensional (3D) imaging is a hot topic in the field of 3D imaging because of its advantages of low computation cost, high imaging accuracy, fast imaging speed, and cost-effectiveness. Structured-light 3D imaging requires uniform diffractive optical elements (DOEs), which could be realized by quasi-continuous-phase metasurfaces.

View Article and Find Full Text PDF

In recent years, wide field-of-view imaging technology based on a metasurface has been widely applied. However, works on the reported sub-diffraction metalens with a wide field-of-view indicate that multiple structures are essential to effectively eliminate aberrations, which results in a heavy device thickness and weakens the advantage of an ultra-thin metasurface. To solve this problem, according to the super-oscillation theory and the translational symmetry of quadratic phase, as well as the principle of virtual aperture diaphragm based on wave vector filter, this Letter demonstrates a sub-diffraction metalens combined with a single quadratic metalens and a wave vector filter.

View Article and Find Full Text PDF

Metasurfaces, 2D arrays of nanostructures, have gained significant attention in recent years due to their ability to manipulate light at the subwavelength scale. Their diverse applications range from advanced optical devices to sensing and imaging technologies. However, the mass production of dielectric metasurfaces with tailored properties for visible light has remained a challenge.

View Article and Find Full Text PDF

Passive daytime radiative cooling (PDRC) materials with sustainable energy harvesting capability is critical to concurrently reduce traditional cooling energy utilized for thermal comfort and transfer natural clean energies into electricity. Herein, a versatile photonic film (Ecoflex@BTO@UAFL) based on a novel fluorescent luminescence color passive radiative cooling with triboelectric and piezoelectric effect is developed by filling the dielectric BaTiO (BTO) nanoparticles and ultraviolet absorption fluorescent luminescence (UAFL) powder into the elastic Ecoflex matrix. Test results demonstrate that the Ecoflex@BTO@UAFL photonic film exhibits a maximum passive radiative cooling effect of ∽10.

View Article and Find Full Text PDF

Free space optical (FSO) communication has gained widespread attention due to its advantages, including high confidentiality, high communication capacity, and no limitation of spectrum. One of the great challenges in FSO communication is the transmission performance degradation in atmospheric turbulence channel due to wavefront distortion and scintillation. Here, we proposed and experimentally demonstrated a 120 Gbit/s vector beam multiplexed coherent optical communication system with turbulence-resilient capacity.

View Article and Find Full Text PDF

Developing versatile systems that can concurrently achieve energy saving and energy generation is critical to accelerate carbon neutrality. However, challenges on designing highly effective, large scale, and multifunctional photonic film hinder the concurrent combination of passive daytime radiative cooling (PDRC) and utilization of sustainable clean energies. Herein, a versatile scalable photonic film (Ecoflex@h-BN) with washable property and excellent mechanical stability is developed by combining the excellent scattering efficiency of the hexagonal boron nitride (h-BN) nanoplates with the high infrared emissivity and ideal triboelectric negative property of the Ecoflex matrix.

View Article and Find Full Text PDF

This paper proposes and demonstrates a flexible long-wave infrared snapshot multispectral imaging system consisting of a simple re-imaging system and a pixel-level spectral filter array. A six-band multispectral image in the spectral range of 8-12 µm with full width at half maximum of about 0.7 µm each band is acquired in the experiment.

View Article and Find Full Text PDF

Polaritons - material excitation coupled with light - are thought to hold the potential for the extreme control of light down to the atomic length scale because of their high field confinement and sub-wavelength scales. For practical applications, it is essential but still a formidable challenge to manipulate polaritons with high efficiency and a wide tunable range. These obstacles may be overcome by the topology of polaritons.

View Article and Find Full Text PDF
Article Synopsis
  • - A new type of SERS substrate using a metal-insulator-metal (MIM) structure made of Ag nanoislands and silicon oxide has been developed to overcome issues with high cost and reproducibility in sensing applications.
  • - The substrate is created using simple and inexpensive methods involving evaporation and sputtering, yielding a significant enhancement factor (1.83 × 10) and a low limit of detection for rhodamine 6G molecules.
  • - This innovative SERS substrate outperforms conventional Ag nanoisland structures by 18 times in sensitivity, and demonstrates excellent reproducibility with a relative standard deviation of less than 9%.
View Article and Find Full Text PDF

In this paper, we demonstrated a miniaturized diffractive/refractive hybrid system based on a diffractive optical element and three refractive lenses to achieve solar-blind ultraviolet imaging within a range of 240-280 nm. We experimentally demonstrate the optical system has both outstanding resolution and excellent imaging capability. The experiments demonstrate that the system could distinguish the smallest line pair with a width of 16.

View Article and Find Full Text PDF

Optical encryption is a promising approach to protecting secret information owing to the advantages of low-power consumption, parallel, high-speed, and multi-dimensional processing capabilities. Nevertheless, conventional strategies generally suffer from bulky system volume, relatively low security level, redundant measurement, and/or requirement of digital decryption algorithms. Here, we propose a general optical security strategy dubbed meta-optics-empowered vector visual cryptography, which fully exploits the abundant degrees of freedom of light as well as the spatial dislocation as key parameters, significantly upgrading the security level.

View Article and Find Full Text PDF

For the first time, to the best of our knowledge, we experimentally demonstrate a high-speed free-space secure optical communication system based on all-optical chaos modulation. The effect of atmospheric turbulence on optical chaos synchronization is experimentally investigated via a hot air convection atmospheric turbulence simulator. It is shown that, even under moderately strong turbulent conditions, high-quality chaos synchronization could be obtained by increasing the transmission power.

View Article and Find Full Text PDF

Artificial camouflage has garnered long-standing interest in both academia and industry. The metasurface-based cloak has attracted much attention due to the powerful capability of manipulating the electromagnetic wave, convenient multifunctional integration design, and easy fabrication. However, existing metasurface-based cloaks tend to be passive and of single function and monopolarization, which cannot meet the requirement of applications in ever-changing environments.

View Article and Find Full Text PDF
Article Synopsis
  • Phase-gradient metasurfaces are advanced 2D optical elements that manipulate light by altering the phase of electromagnetic waves, offering thin alternatives to traditional optical components.
  • Current fabrication methods for these metasurfaces are often complex, costly, and hazardous, posing significant challenges.
  • A new one-step UV-curable resin printing methodology has been developed, streamlining the production process, reducing costs and risks, and showcasing its potential through the rapid creation of efficient metalenses.
View Article and Find Full Text PDF

Graphene is a promising candidate for the next-generation infrared array image sensors at room temperature due to its high mobility, tunable energy band, wide band absorption, and compatibility with complementary metal oxide semiconductor process. However, it is difficult to simultaneously obtain ultrafast response time and ultrahigh responsivity, which limits the further improvement of graphene photoconductive devices. Here, a novel graphene/C /bismuth telluride/C /graphene vertical heterojunction phototransistor is proposed.

View Article and Find Full Text PDF