A chromosome-level genome assembly of Chinese quince ().

Introduction: , also known as Chinese quince, is a perennial shrub or small tree highly valued for its edibility and medicinal properties.

Method: This study presents the first chromosome-level genome assembly of , achieved using HiFi sequencing and Hi-C scaffolding technology.

Results: The assembly resulted in a high-quality genome of 576.

Interpeduncular cistern intrathecal targeted drug delivery for intractable postherpetic neuralgia: A case report.

Background: Intractable postherpetic neuralgia (PHN) can be difficult to manage even with aggressive multimodal therapies. Patients who experience uncontrolled refractory cranial PHN despite conservative treatment may benefit from an intrathecal drug delivery system (IDDS). For craniofacial neuropathic pain, the traditional approach has been to place the intrathecal catheter tip below the level of the cranial nerve root entry zones, which may lead to insufficient analgesia.

Lever arm on bracket vs. lever arm on archwire: A 3D finite element method study of mechanics of miniscrew-supported lingual en-masse retraction of maxillary anterior teeth.

Objective: To compare the deformation of the main archwire and 3D movements of maxillary anterior teeth during miniscrew-supported en-masse retraction with the lever arm on the archwire and on the brackets in lingual orthodontic treatment in finite element analysis (FEM) simulation.

Material And Methods: A 3D dental-alveolar model with bonded 0.018×0.

3D printed PEKK bone analogs with internal porosity and surface modification for mandibular reconstruction: An in vivo rabbit model study.

Polyetheretherketone (PEEK) and its derivative polyetherketoneketone (PEKK) have been used as implant materials for spinal fusing and enjoyed their success for many years because of their mechanical properties similar to bone and their chemical inertness. The osseointegration of PEEKs is datable. Our strategy was to use custom-designed and 3D printed bone analogs with an optimized structure design and a modified PEKK surface to augment bone regeneration for mandibular reconstruction.

Experimental validation of a new model for mandibular motions.

Long-term excessive forces loading from muscles of mastication during mandibular motions may result in disorders of temporomandibular joint (TMJ), myofascial pain, and restriction of jaw opening and closing. Current analysis of mandibular movements is generally conducted with a single opening, protrusive and lateral movements rather than composite motions that the three can be combined arbitrarily. The objective of this study was to construct theoretical equations reflecting the correlation between composite motions and muscle forces, and consequently to analyze the mandibular composite motions and the tensions of muscles of mastication in multiple dimensions.

Comparative analysis of chloroplast genomes of endangered heterostylous species and its closely related species.

, well known for its heterostyly, is the largest genus in the family Primulaceae with more than 500 species. The considerable species number has introduced a huge challenge for taxonomy. The phylogenetic relationships among still maintain unresolved due to frequent hybridization and introgression between closely related species.

The Clinical Significance of Detecting Blood Supply to the Inferior Parathyroid Gland Based on the "Layer of Thymus-Blood Vessel-Inferior Parathyroid Gland" Concept.

Objective: How to preserve the inferior parathyroid gland (IPTG) in situ during central neck dissection (CND) is the major concern of thyroid surgeons. The "layer of thymus-blood vessel-IPTG" (TBP layer) concept showed to be effective in preserving IPTG. The objective of this study was to identify the origin and course of blood supply to IPTG (IPBS) within the TBP layer and to take key points of operation during CND.

3D-printed porous condylar prosthesis for temporomandibular joint replacement: Design and biomechanical analysis.

Background: Customized prosthetic joint replacements have crucial applications in severe temporomandibular joint problems, and the combined use of porous titanium scaffold is a potential method to rehabilitate the patients.

Objective: The objective of the study was to develop a design method to obtain a titanium alloy porous condylar prosthesis with good function and esthetic outcomes for mandibular reconstruction.

Methods: A 3D virtual mandibular model was created from CBCT data.

Biomechanical behavior of mandible with posterior marginal resection using finite element analysis.

This study aims to characterize biomechanical behavior of various designs of posterior mandibular marginal resection under functional loadings using finite element method. The ultimate goal of this work is to provide clinically relevant information to prevent postoperative fracture and to stipulate prophylactic internal fixation for planning of marginal mandibulectomy. A 3D mandibular master model was reconstructed from cone beam computed tomography images.

Evaluation of a custom-designed human-robot collaboration control system for dental implant robot.

Background: The purpose of this study is to develop a methodology to better control a human-robot collaboration for robotic dental implant placement. We have designed a human-robot collaborative implant system (HRCDIS) which is based on a zero-force hand-guiding concept and a operational task management workflow that can achieve highly accurate and stable osteotomy drilling based on a surgeon's decision and robotic arm movements during implant surgery.

Method: The HRCDIS brings forth the robot arm positions, exact drilling location, direction and performs automatic drilling.

Biomechanical and Mechanostat analysis of a titanium layered porous implant for mandibular reconstruction: The effect of the topology optimization design.

A porous scaffold/implant is considered a potential method to repair bone defects, but its mechanical stability and biomechanics during the repair process are not yet clear. A mandibular titanium implant was proposed and designed with layered porous structures similar to that of the bone tissue, both in structure and mechanical properties. Topology was used to optimize the design of the porous implant and fixed structure.

Experimental validation of finite element simulation of a new custom-designed fixation plate to treat mandibular angle fracture.

Background: The objective of the study was to validate biomechanical characteristics of a 3D-printed, novel-designated fixation plate for treating mandibular angle fracture, and compare it with two commonly used fixation plates by finite element (FE) simulations and experimental testing.

Methods: A 3D virtual mandible was created from a patient's CT images as the master model. A custom-designed plate and two commonly used fixation plates were reconstructed onto the master model for FE simulations.

Accuracy of dental implant surgery with robotic position feedback and registration algorithm: An in-vitro study.

Background: The purpose of this study was to develop and validate a positioning method with hand-guiding and contact position feedback of robot based on a human-robot collaborative dental implant system (HRCDIS) for robotic guided dental implant surgery.

Methods: An HRCDIS was developed based on a light-weight cooperative robot arm, UR5. A three-dimensional (3D) virtual partially edentulous mandibular bone was reconstructed using the cone bone computed tomography images.

Topological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction.

Purpose: The purpose of this study was to analyze mechanical behaviors of a topologically optimized and 3D-printed mandibular bone block with polyetherketoneketone (PEKK) for surgical mandibular reconstruction.

Materials And Methods: 3D virtual mandibular models were reconstructed from cone beam computed tomography images. A proposed mandibular resection of the mandibular body (40 mm anterior-posteriorly) was segmented.

Bionic mechanical design and 3D printing of novel porous Ti6Al4V implants for biomedical applications.

In maxillofacial surgery, there is a significant need for the design and fabrication of porous scaffolds with customizable bionic structures and mechanical properties suitable for bone tissue engineering. In this paper, we characterize the porous Ti6Al4V implant, which is one of the most promising and attractive biomedical applications due to the similarity of its modulus to human bones. We describe the mechanical properties of this implant, which we suggest is capable of providing important biological functions for bone tissue regeneration.

Anatomical localization of normal parathyroid glands before thyroidectomy through ultrasonography reduces postoperative hypoparathyroidism.

Postoperative hypoparathyroidism due to dysfunction of the parathyroid gland is the most common complication after thyroidectomy. Our objective was to introduce the method of anatomical localization of normal parathyroid glands before thyroidectomy through ultrasonography and to evaluate its efficiency. The study group included 52 patients subjected to anatomical localization of the parathyroid gland prethyroidectomy through ultrasonography.

Biomechanical behavior of mandibles reconstructed with fibular grafts at different vertical positions using finite element method.

Background: For large mandibular defects, surgical reconstruction using microvascular fibular grafts has advantages over other alternatives in terms of blood supply and good quality of grafted bone. However, the fibular segment is usually lower in height than that of the original mandible, meaning that the vertical positioning of the fibular graft is variable, with different biomechanical consequences on the reconstructed mandible.

Objectives: To use finite element method (FEM) to evaluate stress distribution and displacement of a reconstructed mandible versus an intact mandible under occlusal loads.

Variation in the degree of reciprocal herkogamy affects the degree of legitimate pollination in a distylous species.

Distyly is a widespread floral polymorphism characterized by the flowers within a population showing reciprocal placement of the anthers and stigma. Darwin hypothesizes that distyly evolves to promote precise pollen transfer between morphs. exhibits two types of anther heights, and these two types of anthers show pollen of two different size classes.

Exendin-4 inhibits high-altitude cerebral edema by protecting against neurobiological dysfunction.

The anti-inflammatory and antioxidant effects of exendin-4 (Ex-4) have been reported previously. However, whether (Ex-4) has anti-inflammatory and antioxidant effects on high-altitude cerebral edema (HACE) remains poorly understood. In this study, two rat models of HACE were established by placing rats in a hypoxic environment with a simulated altitude of either 6000- or 7000-m above sea level (MASL) for 72 hours.

Correlation between the timing of autonomous selfing and floral traits: a comparative study from three selfing Gentianopsis species (Gentianaceae).

About 20% of angiosperms employ self-fertilization as their main mating strategy. In this study, we aimed to examine how the selfing timing correlated with floral traits in three Gentianopsis species in which autonomous selfing is achieved through filament elongation. Although the three Gentianopsis species exhibit no significant variation in their capacity for autonomous selfing, flowers of G.

A finite element analysis of the stress distribution to the mandible from impact forces with various orientations of third molars.

Objective: To investigate the stress distribution to the mandible, with and without impacted third molars (IM3s) at various orientations, resulting from a 2000-Newton impact force either from the anterior midline or from the body of the mandible.

Materials And Methods: A 3D mandibular virtual model from a healthy dentate patient was created and the mechanical properties of the mandible were categorized to 9 levels based on the Hounsfield unit measured from computed tomography (CT) images. Von Mises stress distributions to the mandibular angle and condylar areas from static impact forces (Load I-front blow and Load II left blow) were evaluated using finite element analysis (FEA).

A customized fixation plate with novel structure designed by topological optimization for mandibular angle fracture based on finite element analysis.

Background: The purpose of this study was to design a customized fixation plate for mandibular angle fracture using topological optimization based on the biomechanical properties of the two conventional fixation systems, and compare the results of stress, strain and displacement distributions calculated by finite element analysis (FEA).

Methods: A three-dimensional (3D) virtual mandible was reconstructed from CT images with a mimic angle fracture and a 1 mm gap between two bone segments, and then a FEA model, including volume mesh with inhomogeneous bone material properties, three loading conditions and constraints (muscles and condyles), was created to design a customized plate using topological optimization method, then the shape of the plate was referenced from the stress concentrated area on an initial part created from thickened bone surface for optimal calculation, and then the plate was formulated as "V" pattern according to dimensions of standard mini-plate finally. To compare the biomechanical behavior of the "V" plate and other conventional mini-plates for angle fracture fixation, two conventional fixation systems were used: type A, one standard mini-plate, and type B, two standard mini-plates, and the stress, strain and displacement distributions within the three fixation systems were compared and discussed.

Self- and intra-morph incompatibility and selection analysis of an inconspicuous distylous herb growing on the Tibetan plateau ().

There is discussion over whether pollen limitation exerts selection on floral traits to increase floral display or selects for traits that promote autonomous self-fertilization. Some studies have indicated that pollen limitation does not mediate selection on traits associated with either pollinator attraction or self-fertilization. is an inconspicuous cross-fertilized plant that may suffer from pollen limitation.

Elastic modulus affects the growth and differentiation of neural stem cells.

It remains poorly understood if carrier hardness, elastic modulus, and contact area affect neural stem cell growth and differentiation. Tensile tests show that the elastic moduli of Tiansu and SMI silicone membranes are lower than that of an ordinary dish, while the elastic modulus of SMI silicone membrane is lower than that of Tiansu silicone membrane. Neural stem cells from the cerebral cortex of embryonic day 16 Sprague-Dawley rats were seeded onto ordinary dishes as well as Tiansu silicone membrane and SMI silicone membrane.

Asymmetrical disassortative pollination in a distylous primrose: the complementary roles of bumblebee nectar robbers and syrphid flies.

Heterostyly is a floral polymorphism characterized by reciprocal herkogamy maintained through high levels of mating between morphs, serviced by appropriate pollinators. We studied how differential efficiency and abundance of distinct pollinators affect plant female reproduction in self- and intra-morph incompatible distylous Primula secundiflora. Bumblebees and syrphid flies were found to be the most abundant floral visitors.