A novel route to 3D printable protein-based HIPEs developed with shiitake oil.

Tuning protein-based Pickering high internal phase emulsions (HIPEs) into 3D printing inks is promising in the food fields. Currently, the correlation between the changes in oil phase composition and the regulation of protein-based HIPEs 3D printing performance is still unclear. In this study, spiking the shiitake oil (ranging from 0 to 60 %) into the soybean oil phase of HIPEs can enhance their rheological properties and induce the formation of 3D printable HIPEs.

Structure of yuba films at the air/liquid interface as effected by the interfacial adsorption behavior of protein aggregates.

The effects of adsorption behavior and assembly mechanism of proteins and lipids at the interface on the formation of yuba films were investigated. The thickness of yuba films increased rapidly from nano to micro scale within minutes according to the scanning electron microscopy (SEM) images. The confocal laser scanning microscope (CLSM), SEM images, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed that the formation of protein aggregates (40-100 nm) was an essential requirement for the development of yuba.

Theory and protocol of dual mode unity solid-phase microextraction.

The solid-phase microextraction (SPME) bias problem limits comprehensive analysis of volatile compounds in real samples. The study introduces dual mode unity solid-phase microextraction (DMU-SPME) as a novel SPME mode to achieve balanced extraction of both volatile and low-volatile compounds. The DMU-SPME method exhibits excellent linearity (R ≥ 0.

Microfluidized hemp protein isolate: an effective stabilizer for high-internal-phase emulsions with improved oxidative stability.

Background: Hemp protein isolates (HPIs), which provide a well-balanced profile of essential amino acids comparable to other high-quality proteins, have recently garnered significant attention. However, the underutilized functional attributes of HPIs have constrained their potential commercial applications within the food and agriculture field. This study advocates the utilization of dynamic-high-pressure-microfluidization (DHPM) for the production of stable high-internal-phase emulsions (HIPEs), offering an efficient approach to fully exploit the potential of HPI resources.

Fabrication of glycated yeast cell protein via Maillard reaction for delivery of curcumin: improved environmental stability, antioxidant activity, and bioaccessibility.

Background: The application of curcumin (CUR) in the food industry is limited by its instability, hydrophobicity and low bioavailability. Yeast cell protein (YCP) is a by-product of spent brewer's yeast, which has the potential to deliver bioactive substances. However, the environmental stresses such as pH, salt and heat treatment has restricted its application in the food industry.

Balanced extraction of volatile and semi-volatile compounds by dynamic linked position unity solid-phase microextraction.

Although the compound profiles in extracts are linked to the solid-phase microextraction (SPME) position (headspace or liquid), a theoretical interpretation of this scenario has not yet been provided. In this study, the dynamic linked position unity (DLPU)-SPME is proposed as a method that allows balanced extraction of volatile and semi-volatile compounds. Furthermore, the pH, temperature, and salt were confirmed as the key factors affecting the extraction efficiency of DLPU-SPME.

Untargeted analysis of microbial metabolites and unsaturated fatty acids in salmon via hydrophilic-lipophilic balanced solid-phase microextraction arrow.

The ability to detect spoilage and the nutrient content of salmon is critical for ensuring food safety and determining market value. In this paper, we document the development of a hydrophilic-lipophilic balanced solid-phase microextraction arrow that offers better extraction performance than two other commercial devices. The devices were also compared using two operational models: headspace microextraction and direct immersion.

Construction of Glycogen-Based Nanoparticles Loaded with Resveratrol for the Alleviation of High-Fat Diet-Induced Nonalcoholic Fatty Liver Disease.

The purpose of this study was to construct a glycogen (Gly)-based nanoparticle (NP) with liver-targeted and redox response to effectively deliver resveratrol (Res) for improving nonalcoholic fatty liver disease (NAFLD). Herein, Gly was modified using α-lipoic acid (α-LA) and lactobionic acid (Lac) to obtain an amphiphilic polymer (Gly-LA-Lac), which was self-assembled in water and then encapsulated in Res to form Res NPs with excellent stability. As expected, the Res NPs exhibited liver-targeted and redox response release behavior.

Model studies on the formation of 2-vinylpyrazine and 2-vinyl-6-methylpyrazine in Maillard-type reactions.

Vinylpyrazine compounds are widely present in foods, especially in hot-processed foods, as a class of flavor compounds; however, their formation mechanism in food systems is still unclear. Therefore, in this study, 2-vinylpyrazine and 2-vinyl-6-methylpyrazine were identified in the Maillard model reaction of d-glucose and glycine. The Maillard model reaction of glucose-glycine was constructed to explore the effects of reaction parameters on vinylpyrazines and the related products.

Fabrication of flavour oil high internal phase emulsions by casein/pectin hybrid particles: 3D printing performance.

In this study, three-dimensional (3D) printable oil/water (O/W) high-internal-phase emulsions (HIPEs) (internal phase fraction = 75%) were fabricated using casein (3% w/v)/pectin (1-5% w/v) hybrid particles with flavour oil. The morphologies of the HIPEs, revealed by confocal laser scanning microscopy (CLSM) and cryo-scanning electron microscopy (cryo-SEM), indicated that the casein/pectin hybrid particles were mainly distributed on the interface of oil droplets. Additionally, the results of rheological and gel-strength measurements indicated that the viscosity (ranging from 1316.

Reinvestigation of 2-acetylthiazole formation pathways in the Maillard reaction.

2-Acetylthiazole possesses a nutty, cereal-like and popcorn-like aroma and a low odor threshold, and this compound has been identified in some processed foods, while the formation pathway of 2-acetylthiazole has not been clearly elucidated. Here, a model reaction of d-glucose and l-cysteine was constructed to investigate the formation pathway of 2-acetylthiazole. l-Cysteine, d-glucose and the corresponding intermediates, namely, dicarbonyl compounds (DCs), were involved in the formation of 2-acetylthiazole and detected by high-performance liquid chromatography with tandem mass spectrometry (HPLC-MS/MS), high-performance ion chromatography (HPIC) and HPLC, respectively.

Determination of selected volatile terpenes in fish samples via solid phase microextraction arrow coupled with GC-MS.

A high-efficiency enrichment method is required for determination of trace-level volatile terpenes in fish tissue, since the presence of such compounds in fish at elevated levels may induce bad sensory acceptance of fish meat, thus degrading its customer acceptance and consequently, its market value. In this study, a solid-phase microextraction (SPME) arrow configuration using a thick sorbent coating (120 μm, PDMS/CWR) was applied to enrich selected terpenes, namely α-pinene, limonene, linalool, and citronellol, in fish tissue (Oreochromis niloticus). Due to the thicker coating of the SPME arrow, a longer extraction time of 60 min was required to reach equilibrium extraction in comparison to the traditional fiber configuration.

Improving the functional properties of bovine serum albumin-glucose conjugates in natural deep eutectic solvents.

Glycation between target proteins and saccharides is time-consuming or requires high temperatures. Here, a promising reaction medium, natural deep eutectic solvents (NADES), for glucose glycation with bovine serum albumin (BSA) was applied to improve the grafting of glucose-glycated BSA by shifting reaction equilibrium. Two types of glucose-glycated BSA products were prepared using NADES and water systems.

Ultrasound pre-fractured casein and in-situ formation of high internal phase emulsions.

Traditional preparation of protein particles is usually complex and tedious, which is a major issue in the development of Pickering high internal phase emulsions (HIPEs). In this study, a facile and in-situ method for the preparation of food-grade Pickering HIPEs was developed using ultrasound pre-fractured casein flocs. The ultrasonic-treated casein protein and resulting Pickering HIPEs were characterised using particle size distribution, confocal laser scanning microscopy (CLSM), cryo-SEM, and rheological measurement.

Dispersive solid-phase extraction and dispersive liquid-liquid microextraction for the determination of flavor enhancers in ready-to-eat seafood by HPLC-PDA.

The dispersion solid-phase microextraction (DSPE) combined with dispersion liquid-liquid microextraction (DLLME) was developed as a rapid, simple and effective pretreatment method for the determination of flavor enhancers (maltol, ethyl maltol, vanillin, methyl vanillin, ethyl vanillin) of ready-to-eat seafood products (dried squid, baked squid, fried fish, steamed abalone). Under the optimized DSPE-DLLME method, the developed method exhibited low limits of quantitation (0.20-0.

Effect of alkyl distribution in pyrazine on pyrazine flavor release in bovine serum albumin solution.

The flavor release mechanism related to the interaction of aroma compounds with proteins is still unclear. In this study, the interaction of protein with pyrazine homologues, such as 2-methylpyrazine (MP), 2,5-dimethylpyrazine (DP), 2,3,5-trimethylpyrazine (TRP) and 2,3,5,6-tetramethylpyrazine (TEP), was investigated to elucidate the effect of alkyl distribution in a pyrazine ring on its flavor release in bovine serum albumin (BSA) solution (pH 7.4).

Coated direct inlet probe coupled with atmospheric-pressure chemical ionization and high-resolution mass spectrometry for fast quantitation of target analytes.

The coated direct inlet probe (CDIP) is a new laboratory-made low-cost technology developed from a direct inlet probe (DIP), which has the advantage of quick enrichment/cleanup of an analyte from liquid samples. A capillary probe is coated with hydroxy-terminated polydimethylsiloxane (OH-PDMS), divinylbenzene (DVB), and β-cyclodextrin (β-CD) by a sol-gel method. This probe can be directly coupled with a commercialized atmospheric-pressure chemical ionization (APCI) ion source and high-resolution mass spectrometry, which are widely applicable, reliable, and durable.

Simultaneous quantification of free amino acids and 5'-nucleotides in shiitake mushrooms by stable isotope labeling-LC-MS/MS analysis.

Evaluation of free amino acids (FAAs) and nucleotides in various food matrices has been a widely studied topic in recent years. Here, a fast and efficient strategy for the simultaneous analysis of 20 FAAs and six 5'-nucleotides, using stable isotope labeling-liquid chromatography coupled with tandem mass spectrometry (SIL-LC-MS/MS) is proposed. The method was validated with respect to selectivity, linearity, limits of detection (LOD) and quantification (LOQ), recovery, precision, and stability.

Evaluation of lipid profile in different tissues of Japanese abalone Haliotis discus hannai Ino with UPLC-ESI-Q-TOF-MS-based lipidomic study.

Abalone has been farmed commercially for the last few decades, and the breeding and economic value of abalone have gained extensive attention. In this study, the lipid profile of the foot muscles, viscera, and gonads of male and female Japanese abalone Haliotis discus hannai Ino was explored using ultra performance liquid chromatography-electrospray ionization-quadrupole time-of-flight mass spectrometry (UPLC-ESI-Q-TOF-MS), to discuss the effect of lipid composition on its nutritional value. Thirty-four species from ten lipid classes including phosphatidylcholine, phosphatidylethanolamine, phosphatidylserine, phosphatidylglycerol, phosphatidic acid, lysophosphatidic acid, triacylglycerol, steroids, terpenoids and fatty acids were annotated by MS-DIAL to obtain all fragment ions for precursors.

Isotope dilution determination for the trace level of 4(5)-methylimidazole in beverages using dispersive liquid-liquid microextraction coupled with ESI-HPLC-MS/MS.

In this study, a rapid and reliable pretreatment method called dispersive liquid-liquid microextraction (DLLME) was developed for the determination of 4(5)-methylimidazole (4-MeI) in beverages. The clean-up samples were analyzed by a high performance liquid chromatography coupled with triple quadrupole mass spectrometer (HPLC-MS/MS) using a reversed-phase C18 column (250 mm × 4.6 mm, 5 μm).

Isotope dilution HPLC-MS/MS for simultaneous quantification of acrylamide and 5-hydroxymethylfurfural (HMF) in thermally processed seafood.

The objective of this study was to develop an accurate, robust and rapid HPLC-MS/MS-based method capable of quantifying acrylamide and 5-hydroxymethylfurfural (HMF) simultaneously. A Phenomenex Synergi Fusion-RP C column (50mm×2.5mm, 2μm) was used, and the MS/MS instrument was operated in multiple reaction monitoring mode.

Promotion effect of sulfite on deoxyosones and 4-methylimidazole in caramel model system.

In this study, hydrogen-deuterium (H/D) exchange experiment was carried out to reveal the promotion effect of sulfite on the formation of deoxyosones and 4-methylimidazole (4-MeI) in the Maillard reaction. Glucose-ammonium (40mmol/L, pH 7.4 in PBS) model systems with different levels of sulfite were incubated at 110°C for 2h.

Inhibitory effect of sugarcane molasses extract on the formation of N-(carboxymethyl)lysine and N-(carboxyethyl)lysine.

Molasses, the main byproduct of sugar production, is a well-known source of phenolic compounds. In this study, the effect of sugarcane molasses extract on the formation of N-(carboxymethyl)lysine (CML) and N-(carboxyethyl)lysine (CEL) was investigated in glucose-lysine model reaction systems. Results showed that sugarcane molasses extract significantly and dose dependently inhibited the formation of CML and CEL in model reaction systems.