High-power 2.3 µm Tm:YLF laser with intracavity upconversion pumping by a Nd:ASL laser at 1051 nm.

A Tm:LiYF laser operating on the H→ H transition is embedded in a high-power diode-pumped Nd:ASL laser for intracavity upconversion pumping at 1.05 µm. This leads to a record-high output power at 2.

Highly efficient, high average power, narrowband, pump-tunable BWOPO.

We demonstrate a continuously tunable mid-infrared source that produces narrowband radiation at 1981 nm and 2145 nm based on a tunable Yb-based hybrid MOPA pump and a backward-wave optical parametric oscillator (BWOPO). The BWOPO employs a PPRKTP crystal with 580 nm domain periodicity. The BWOPO has a record-low oscillation threshold of 19.

Single-stage few-cycle nonlinear compression of milliJoule energy Ti:Sa femtosecond pulses in a multipass cell.

We report on the nonlinear temporal compression of mJ energy pulses from a Ti:Sa chirped pulse amplifier system in a multipass cell filled with argon. The pulses are compressed from 30 fs down to 5.3 fs, corresponding to two optical cycles.

Efficient and high-throughput ablation of platinum using high-repetition rate radially and azimuthally polarized sub-picosecond laser pulses.

A highly productive ablation process of 100 nm thick platinum films with a processed area rate of up to 378 cm/min is presented using radially and azimuthally polarized laser beams. This was achieved by developing a laser amplifier generating 757 fs long laser pulses at a maximum average power of 390 W and a repetition rate of 10.6 MHz with adjustable polarization states, i.

Raman wavelength conversion in a multipass cell.

Positively chirped femtosecond pulses at 1030 nm are wavelength-converted using spontaneous and stimulated Raman scattering in a potassium gadolinium tungstate crystal inserted inside a multipass cell. Recirculation in the cell and the Raman material allows both a high conversion efficiency and good spatial beam quality for the generated Stokes beams. The converted pulses can be compressed to sub-picosecond duration.

Harnessing subcellular-resolved organ distribution of cationic copolymer-functionalized fluorescent nanodiamonds for optimal delivery of active siRNA to a xenografted tumor in mice.

Diamond nanoparticles (nanodiamonds) can transport active drugs in cultured cells as well as in vivo. However, in the latter case, methods allowing the determination of their bioavailability accurately are still lacking. A nanodiamond can be made fluorescent with a perfectly stable emission and a lifetime ten times longer than that of tissue autofluorescence.

Generation of optically synchronized pump-signal beams for ultrafast OPCPA via the optical Kerr effect.

In recent years, multi-petawatt laser installations have achieved unprecedented peak powers, opening new horizons to laser-matter interaction studies. Ultra-broadband and extreme temporal contrast pulse requirements make optical parametric chirped pulse amplification (OPCPA) in the few-picosecond regime the key technology in these systems. To guarantee high fidelity output, however, OPCPA requires excellent synchronization between pump and signal pulses.

Spectral compression in a multipass cell.

Starting from a femtosecond ytterbium-doped fiber amplifier, we demonstrate the generation of near Fourier transform-limited high peak power picosecond pulses through spectral compression in a nonlinear solid-state-based multipass cell. Input 260 fs pulses negatively chirped to 2.4 ps are spectrally compressed from 6 nm down to 1.

Self-compression in a multipass cell.

We demonstrate self-compression of short-wavelength infrared pulses in a multipass cell (MPC) containing a plate of silica. Nonlinear propagation in the cell in the anomalous dispersion regime results in the generation of 14 μJ 22 fs pulses at 125 kHz repetition rate and 1550 nm wavelength. Periodic focusing inside the cell allows us to circumvent catastrophic self-focusing, despite an output peak power of 440 MW well beyond the critical power in silica of 10 MW.

Yb:YAG single-crystal fiber amplifiers for picosecond lasers using the divided pulse amplification technique.

A two-stage master-oscillator power-amplifier (MOPA) system based on Yb:YAG single-crystal-fiber (SCF) technology and designed for high peak power is studied to significantly increase the pulse energy of a low-power picosecond laser. The first SCF amplifier has been designed for high gain. Using a gain medium optimized in terms of doping concentration and length, an optical gain of 32 dB has been demonstrated.

Contradiction within wave optics and its solution within a particle picture: comment.

An error in the rationale presented in the paper "Contradiction within wave optics and its solution within a particle picture" by Altmann [Opt. Express 23, 3731 (2015)10.1364/OE.

High-power Yb:YAG single-crystal fiber amplifiers for femtosecond lasers in cylindrical polarization.

We demonstrate a three-stage diode-pumped Yb:YAG single-crystal-fiber amplifier to generate femtosecond pulses at high average powers with linear or cylindrical (i.e., radial or azimuthal) polarization.

Passively mode-locked Yb:CaF2 thin-disk laser.

We report on the first demonstration of a passively (SESAM) mode-locked Yb:CaF(2) thin-disk laser operating at a repetition rate of 35 MHz with close to diffraction-limited beam quality (M(2) ≈ 1.1) at an average output power of up to 6.6 W.

Direct amplification of a nanosecond laser diode in a high gain diode-pumped Nd:YVO₄ amplifier.

We demonstrate that Nd:YVO₄ can efficiently amplify a nanosecond laser diode in a very simple double-pass configuration. Based on longitudinal pumping with a high brightness fiber-coupled laser diode at 808 nm (60 W, 100 μm, 0.22 NA) and a low Nd-doped (0.

Amplification of cylindrically polarized laser beams in single crystal fiber amplifiers.

Yb:YAG single crystal fiber (SCF) amplifiers have recently drawn much attention in the field of amplification of ultra-short pulses. In this paper, we report on the use of SCF amplifiers for the amplification of cylindrically polarized laser beams, as such beams offer promising properties for numerous applications. While the amplification of cylindrically polarized beams is challenging with other amplifier designs due to thermally induced depolarization, we demonstrate the amplification of 32 W cylindrically polarized beams to an output power of 100 W.

Hybrid master oscillator power amplifier high-power narrow-linewidth nanosecond laser source at 257 nm.

We report on a high-power narrow-linewidth pulsed laser source emitting at a wavelength of 257 nm. The system is based on a master oscillator power amplifier architecture, with Yb-doped fiber preamplifiers, a Yb:YAG single crystal fiber power amplifier used to overcome the Brillouin limitation in glass fiber and nonlinear frequency conversion stages. This particularly versatile architecture allows the generation of Fourier transform-limited 15 ns pulses at 1030 nm with 22 W of average power and a diffraction-limited beam (M(2)<1.

Yb:YAG single crystal fiber power amplifier for femtosecond sources.

We demonstrate a versatile femtosecond power amplifier using a Yb:YAG single crystal fiber operating from 10 kHz to 10 MHz. For a total pump power of 75 W, up to 30 W is generated from the double-pass power amplifier. At a repetition rate of 10 kHz, an output energy of 1 mJ is obtained after recompression.

250 W single-crystal fiber Yb:YAG laser.

We demonstrate an Yb:YAG single-crystal fiber laser with 251 W output power in continuous-wave and an optical efficiency of 44%. This performance can be explained by the high overlap between pump and signal beams brought by the pump guiding and by the good thermal management provided by the single-crystal fiber geometry. The oscillator performance with a reflectivity of the output coupler as low as 20% also shows high potential for power amplification.