Ex vivo storage of human osteochondral allografts: Long-term analysis over 300 days using a Ringer-based solution.

Large osteochondral defects are a major challenge in orthopedics, for which osteochondral allograft (OCA) transplantation is nowadays considered as an option, especially in young patients. However, a major issue with OCA is the need for graft storage, which ensures adequate cartilage integrity over time. The aim of this study was to test how long a Ringer-based storage solution can provide good graft quality after explantation and thus meet the requirements for OCA.

A Glutaraldehyde-Free Crosslinking Method for the Treatment of Collagen-Based Biomaterials for Clinical Application.

Biological bioprostheses such as grafts, patches, and heart valves are often derived from biological tissue like the pericardium. These bioprostheses can be of xenogenic, allogeneic, or autologous origin. Irrespective of their origin, all types are pre-treated via crosslinking to render the tissue non-antigenic and mechanically strong or to minimize degradation.

Elastin stabilization prevents impaired biomechanics in human pulmonary arteries and pulmonary hypertension in rats with left heart disease.

Pulmonary hypertension worsens outcome in left heart disease. Stiffening of the pulmonary artery may drive this pathology by increasing right ventricular dysfunction and lung vascular remodeling. Here we show increased stiffness of pulmonary arteries from patients with left heart disease that correlates with impaired pulmonary hemodynamics.

Development and systematic evaluation of decellularization protocols in different application models for diaphragmatic tissue engineering.

Background: Tissue engineered bioscaffolds based on decellularized composites have gained increasing interest for treatment of various diaphragmatic impairments, including muscular atrophies and diaphragmatic hernias. Detergent-enzymatic treatment (DET) constitutes a standard strategy for diaphragmatic decellularization. However, there is scarce data on comparing DET protocols with different substances in distinct application models in their ability to maximize cellular removal while minimizing extracellular matrix (ECM) damage.

Is there a Difference in Interfragmentary Compression Strength Between Fully or Partially Threaded Screws? Results of an Experimental Biomechanical Pilot Study.

 This study assessed differences between fully- and partially-threaded screws in the initial interfragmentary compression strength. Our hypothesis was that there would be an increased loss in initial compression strength with the partially-threaded screw.  A 45-degree oblique fracture line was created in artificial bone samples.

Biomechanical Comparison of WE43-Based Magnesium vs. Titanium Miniplates in a Mandible Fracture Model in Sheep.

In fractures of the mandible, osteosynthesis with titanium plates is considered the gold standard. Titanium is an established and reliable material, its main disadvantages being metal artefacts and the need for removal in case of osteosynthesis complications. Magnesium, as a resorbable material with an elastic modulus close to cortical bone, offers a resorbable alternative osteosynthesis material, yet mechanical studies in mandible fracture fixation are still missing.

A New System for Periprosthetic Fracture Stabilization-A Biomechanical Comparison.

In recent years, an increase in periprosthetic femur fractures has become apparent due to the increased number of hip replacements. In the case of Vancouver type B1 fractures, locking plate systems offer safe procedures. This study compared the distal lateral femur plate (LOQTEQ, aap Implantate AG) with a standard L.

A Higher Initial Tensioning Force of an ACL Graft Results in a Higher Graft Force After Screw Fixation Irrespective of the Screw Diameter: A Biomechanical Study.

Background: The intra-articular graft force (IAGF) in anterior cruciate ligament reconstruction decreases quickly over the first hours after surgery. Nevertheless, little is known about whether the initial extra-articular tensioning force (EATF) and screw diameter affect the graft force after fixation.

Purpose: To investigate the effects of different EATFs on the IAGF of a soft tissue graft fixated via a bioabsorbable interference screw over 100 minutes after fixation and to evaluate the effects of different screw diameters within 1 mm of the tunnel width during this process.

Role of extracellular matrix structural components and tissue mechanics in the development of postoperative pancreatic fistula.

Radical resection remains the only curative treatment option in pancreatic cancer. Postoperative pancreatic fistulas (POPF) occur in up to 30% of patients leading to prolonged hospital-stay, increased cost of care and morbidity and mortality. Mechanical properties of the pancreas are associated with POPF.

In vitro recellularization of decellularized bovine carotid arteries using human endothelial colony forming cells.

Background: Many patients suffering from peripheral arterial disease (PAD) are dependent on bypass surgery. However, in some patients no suitable replacements (i.e.

Is initial interfragmentary compression made to last? An ovine bone in vitro study.

Interfragmentary compression, a major principle of fracture treatment, is clinically not quantified and might be lost quickly even without functional loads. We designed an experimental study hypothesizing that (1) compression can be controlled using either lag screw or compression plate, and expecting similar initial compression, (2) loss of interfragmentary compression through relaxation within one hour is reduced with neutralization locking plate next to lag screw compared to compression plate. Twelve ovine femora (N=6) and humeri (N=6) were assigned into groups: Group 1 received a 45° oblique osteotomy at mid-diaphysis and was fixated using a 3.

Significant Loss of ACL Graft Force With Tibial-Sided Soft Tissue Interference Screw Fixation Over 24 Hours: A Biomechanical Study.

Background: Tibial-sided graft fixation is thought to be critical for the success of anterior cruciate ligament (ACL) reconstruction. Nevertheless, little is known about the graft force after fixation during the first 24 hours after surgery or the influence of screw diameter and length during this time.

Purpose: To investigate the force, over the course of 24 hours, in soft tissue grafts secured with a tibial interference screw and to evaluate the effect of different screw diameters (7, 8, and 9 mm) and lengths (25 and 30 mm) on the force in these grafts.

Assessment of Bones Deficient in Fibrillin-1 Microfibrils Reveals Pronounced Sex Differences.

Defects in the extracellular matrix protein fibrillin-1 that perturb transforming growth factor beta (TGFβ) bioavailability lead to Marfan syndrome (MFS). MFS is an autosomal-dominant disorder, which is associated with connective tissue and skeletal defects, among others. To date, it is unclear how biological sex impacts the structural and functional properties of bone in MFS.

Bioactive coating of zirconia toughened alumina ceramic implants improves cancellous osseointegration.

Bioactive coatings have the potential to improve the bony integration of mechanically loaded orthopedic ceramic implants. Using the concept of mimicking the natural bone surface, four different coatings of varying thickness on a zirconia toughened alumina (ZTA) ceramic implant were investigated regarding their osseointegration in a drill-hole model in sheep. The hypothesis that a bioactive coating of ZTA ceramics would facilitate cancellous bone integration was investigated.

Antegrade versus retrograde screw fixation of anterior column acetabular fractures: a biomechanical in vitro study.

Background: To compare the mechanical strength of antegrade versus retrograde lag screw fixation of anterior column acetabular fractures.

Methods: Standardised anterior column fractures were created in synthetic pelvis models and stabilised by either antegrade (ANTE, n = 4) or retrograde (RETRO, n = 4) anterior column screw fixation. In a validated setup, a cyclic loading protocol was applied with increasing axial force (750 cycles, 250-750 N) followed by load to failure.

Release of different amphotericin B formulations from PMMA bone cements and their activity against Candida biofilm.

Amphotericin B is used for local delivery from polymethylmethacrylate to treat fungal prosthetic joint infections. The optimal amphotericin B formulation and the influence of different poragens in the bone cements are unknown. To investigate the necessary amount of amphotericin B in the bone cement to prevent Candida biofilm several amphotericin B formulations were studied: non-liposomal and liposomal with or without poragen gentamicin.

Abnormal bone architecture in mice expressing MyD88 in cells of the osteoclast lineage.

The adapter protein myeloid differentiation primary response gene 88 (MyD88) links the intracellular domains of interleukin receptors 1 and 18, and most Toll-like receptors (TLRs) to interleukin 1 receptor associated kinase (IRAK) signaling and subsequent NF-κB-mediated transcription. Previous work showed that mice with global deficiency of MyD88 (MyD88) have osteopenic cancellous bone along with a reduction in osteoblastic but also osteoclastic surfaces. To further elucidate the role of MyD88 in bone, we utilized mice with osteoclast-restricted MyD88 expression in bone (MyD88).

Experience in the Adaptive Immunity Impacts Bone Homeostasis, Remodeling, and Healing.

Bone formation as well as bone healing capacity is known to be impaired in the elderly. Although bone formation is outpaced by bone resorption in aged individuals, we hereby present a novel path that considerably impacts bone formation and architecture: Bone formation is substantially reduced in aged individual owing to the experience of the adaptive immunity. Thus, immune-aging in addition to chronological aging is a potential risk factor, with an experienced immune system being recognized as more pro-inflammatory.

The Interaction of BMP2-Induced Defect Healing in Rat and Fixator Stiffness Modulates Matrix Alignment and Contraction.

Successful fracture healing requires a tight interplay between mechanical and biological cues. In vitro studies illustrated that mechanical loading modulates bone morphogenetic protein (BMP) signaling. However, in the early phases of large bone defect regeneration in vivo, the underlying mechanisms leading to this mechanosensation remained unknown.

Biomechanical performance of the Actifit scaffold is significantly improved by selection of irrigation fluid.

Purpose: Clinical reports on meniscal scaffolds seem promising, albeit relatively paucity exists regarding their biomechanical behavior. The aim of the study is to delineate the impact of differing suture materials and the type as well as the temperature of the irrigation fluid on the pull-out strength of a polyurethane meniscal scaffold (Actifit).

Materials And Methods: 128 specimens were utilized with horizontal sutures and uniaxial load-to-failure testing was performed.

Examining tissue composition, whole-bone morphology and mechanical behavior of Gorab mice tibiae: A mouse model of premature aging.

Gerodermia osteodysplastica (GO) is a segmental progeroid disorder caused by loss-of-function mutations in the GORAB gene, associated with early onset osteoporosis and bone fragility. A conditional mouse model of GO (Gorab) was generated in which the Gorab gene was deleted in long bones. We examined the biomechanical/functional relevance of the Gorab mutants as a premature aging model by characterizing bone composition, tissue-level strains, and whole-bone morphology and mechanical properties of the tibia.

Biomechanical performance of a collagen meniscus implant with regard to suture material and irrigation fluid.

Background: The role of meniscus scaffolds remains controversial as failure rates remain high. The aim of this study was to evaluate the pullout strength of different suture materials used for fixation of the Collagen Meniscus Implant (CMI) regarding different suture materials, and type or temperature of irrigation fluid.

Methods: One-hundred and twelve specimens were utilized with horizontal sutures and mounted to a dedicated test device.

Establishment of a preclinical ovine screening model for the investigation of bone tissue engineering strategies in cancellous and cortical bone defects.

Background: New tissue engineering strategies for bone regeneration need to be investigated in a relevant preclinical large animal model before making the translation into human patients. Therefore, our interdisciplinary group established a simplified large animal screening model for intramembranous bone defect regeneration in cancellous and cortical bone.

Methods: Related to a well-established model of cancellous drill hole defect regeneration in sheep, both the proximal and distal epimetaphyseal regions of the femur and the humerus were used bilaterally for eight drill hole cancellous defects (Ø 6 mm, 15 mm depth).