Mechanical-Stimuli-Driven Pseudo-Conductive Channels Along Dielectric Heterojunction Interfaces for Mechanoelectric Energy Conversion and Transmission.

Mechanoelectric energy conversion holds promise for energy conversion and transmission devices, yet conventional configurations rely on large-area conductive materials in active regions, limiting architectural design for cutting-edge devices. Here, a rational strategy is reported to create mechanical stimuli-driven pseudo-conductive (MSPC) channels entirely from dielectric materials, eliminating the need for electrodes in active regions. An in-depth investigation of MSPC channel formation mechanism at dielectric interfaces is conducted, employing energy band analyses.

Passive isothermal film with self-switchable radiative cooling-driven water sorption layer for arid climate applications.

Reducing substantial energy demand of active heating, ventilation, and air conditioning in arid climates is of paramount importance. Here, we develop a millimeter-scale passive isothermal film that maintains temperature near 25 °C without relying on energy consumption solely through natural phenomena. A radiative cooling unit comprising polydimethylsiloxane (PDMS) with diffraction grating and fused SiO/Ti/Ag film facilitates radiative cooling during daylight hours.

Mechanical metamaterials as broadband electromagnetic wave absorbers: investigating relationships between geometrical parameters and electromagnetic response.

The utilization of low-density and robust mechanical metamaterials rises as a promising solution for multifunctional electromagnetic wave absorbers due to their structured porous structures, which facilitates impedance matching and structural absorption. However, the various geometrical parameters involved in constructing these metamaterials affect their electromagnetic response, necessitating a comprehensive understanding of underlying absorbing mechanisms. Through experimentally validated numerical analysis, this study delves into the influence of geometrical factors on the electromagnetic response of representative low-density, high strength mechanical metamaterials, namely octet-truss and octet-foam.

Multifunctionality of Additively Manufactured Kelvin Foam for Electromagnetic Wave Absorption and Load Bearing.

Rationally engineered porous structures enable lightweight broadband electromagnetic (EM) wave absorbers for countering radar signals or mitigating EM interference between multiple components. However, the scalability of such structures has been hindered by their limited mechanical properties resulting from low density. Herein, an additively manufactured Kelvin foam-based EM wave absorber (KF-EMA) is reported that exhibits multifunctionality, namely EM wave absorption and light-weighted load-bearing structures with constant relative stiffness made possible using bending-dominated lattice structures.

Precisely Tunable Synthesis of Binder-Free Cobalt Oxide-Based Li-Ion Battery Anode Using Scalable Electrothermal Waves.

Binder-free transition metal oxide-based anodes for lithium-ion batteries (LIBs), having high capacity and abundance, have received considerable attention. However, their low conductivity and unstable charge-discharge cycles must be addressed, and scalable fabrication routes for binder-free design with optimal phase tuning are necessary. Herein, we report a precisely tunable synthesis of binder-free cobalt oxide-based LIB anodes using scalable electrothermal waves.

Electrothermally Driven Nucleation Energy Control of Defective Carbon and Nickel-Cobalt Oxide-Based Electrodes.

Multielement metal/metal oxides/carbon-based support hybrids are promising candidates for high-performance electrodes. However, conventional solid-state synthesis utilizing slow heating-cooling rates is limited by discrepancies in their phase transition temperatures. Herein, we report a rational strategy to control the nucleation energy of defective carbon fibers (DCFs) and Ni-Co-oxide-based electrodes capable of electrochemical activation using electrothermal waves (ETWs).

Skin-Inspired Thermometer Enabling Contact-Independent Temperature Sensation via a Seebeck-Resistive Bimodal System.

Tactile sensation is a powerful method for probing the temperature of an arbitrary object due to its intuitive operating mechanism. However, the disruptive interface commonly formed between the thermometer and the object gives rise to thermal contact resistance, which is the primary source of measurement inaccuracy. Here, we develop a bioinspired bimodal temperature sensor exhibiting robust measurement accuracy by precisely decoupling contact resistance from the associated thermal circuit.

Evaluation of accuracy of 3-dimensional printed dental models in reproducing intermaxillary relational measurements: Based on inter-operator differences.

Objective: Although, digital models have recently been used in orthodontic clinics, physical models are still needed for a multitude of reasons. The purpose of this study was to assess whether the printed models can replace the plaster models by evaluating their accuracy in reproducing intermaxillary relationships and by appraising the clinicians' ability to measure the printed models.

Methods: Twenty sets of patients' plaster models with well-established occlusal relationships were selected.

Effects of Insertion of Ag Mid-Layers on Laser Direct Ablation of Transparent Conductive ITO/Ag/ITO Multilayers: Role of Effective Absorption and Focusing of Photothermal Energy.

From the viewpoint of the device performance, the fabrication and patterning of oxide-metal-oxide (OMO) multilayers (MLs) as transparent conductive oxide electrodes with a high figure of merit have been extensively investigated for diverse optoelectronic and energy device applications, although the issues of their general concerns about possible shortcomings, such as a more complicated fabrication process with increasing cost, still remain. However, the underlying mechanism by which a thin metal mid-layer affects the overall performance of prepatterned OMO ML electrodes has not been fully elucidated. In this study, indium tin oxide (ITO)/silver (Ag)/ITO MLs are fabricated using an in-line sputtering method for different Ag thicknesses on glass substrates.

Understanding of the Mechanism for Laser Ablation-Assisted Patterning of Graphene/ITO Double Layers: Role of Effective Thermal Energy Transfer.

Demand for the fabrication of high-performance, transparent electronic devices with improved electronic and mechanical properties is significantly increasing for various applications. In this context, it is essential to develop highly transparent and conductive electrodes for the realization of such devices. To this end, in this work, a chemical vapor deposition (CVD)-grown graphene was transferred to both glass and polyethylene terephthalate (PET) substrates that had been pre-coated with an indium tin oxide (ITO) layer and then subsequently patterned by using a laser-ablation method for a low-cost, simple, and high-throughput process.

Simultaneous electric production and sizing of emulsion droplets in microfluidics.

Microscale emulsions are widely used in fundamental and applied sciences. To expand their utilization, various methods have been developed for manipulating and measuring the physical properties of fabricated emulsions inside microchannels. Herein, we present an electric emulsification platform that can produce emulsions and simultaneously detect their physical properties (size and production speed).

Scalable fabrication of nanopores in membranes via thermal annealing of Au nanoparticles.

Nanopores are promising candidates for versatile sensing of micro- and nanomaterials. However, the fabrication of isolated nanopores with optimal dimensions and distributions requires complex processes that involve the use of high-cost equipment. Herein, we report a scalable fabrication of isolated conical nanopores with adjustable dimensions and distribution densities on a SiN membrane via thermal annealing of Au nanoparticles (AuNPs).

Soft Robotic Manipulation and Locomotion with a 3D Printed Electroactive Hydrogel.

Electroactive hydrogels (EAH) that exhibit large deformation in response to an electric field have received great attention as a potential actuating material for soft robots and artificial muscle. However, their application has been limited due to the use of traditional two-dimensional (2D) fabrication methods. Here we present soft robotic manipulation and locomotion with 3D printed EAH microstructures.

Scalable Synthesis of Triple-Core-Shell Nanostructures of TiO @MnO @C for High Performance Supercapacitors Using Structure-Guided Combustion Waves.

Core-shell nanostructures of metal oxides and carbon-based materials have emerged as outstanding electrode materials for supercapacitors and batteries. However, their synthesis requires complex procedures that incur high costs and long processing times. Herein, a new route is proposed for synthesizing triple-core-shell nanoparticles of TiO @MnO @C using structure-guided combustion waves (SGCWs), which originate from incomplete combustion inside chemical-fuel-wrapped nanostructures, and their application in supercapacitor electrodes.

Tunable Multifunctional Thermal Metamaterials: Manipulation of Local Heat Flux via Assembly of Unit-Cell Thermal Shifters.

Thermal metamaterials, designed by transformation thermodynamics are artificial structures that can actively control heat flux at a continuum scale. However, fabrication of them is very challenging because it requires a continuous change of thermal properties in materials, for one specific function. Herein, we introduce tunable thermal metamaterials that use the assembly of unit-cell thermal shifters for a remarkable enhancement in multifunctionality as well as manufacturability.

Thermoelectric-pyroelectric hybrid energy generation from thermopower waves in core-shell structured carbon nanotube-PZT nanocomposites.

There is an urgent need to develop a suitable energy source owing to the rapid development of various innovative devices using micro-nanotechnology. The thermopower wave (TW), which produces a high specific power during the combustion of solid fuel inside micro-nanostructure materials, is a unique energy source for unusual platforms that cannot use conventional energy sources. Here, we report on the significant enhancement of hybrid energy generation of pyroelectrics and thermoelectrics from TWs in carbon nanotube (CNT)-PZT (lead zirconate titanate, P(Z-T)) composites for the first time.

Thermopower Wave-Driven Hybrid Supercapacitor Charging System.

The development of new energy sources and harvesting methods has increased with the rapid development of multiscale wireless and portable systems. A thermopower wave (TW) is a potential portable energy source that exhibits a high power density. TWs generate electrical energy via the transport of charges inside micro- or nanostructured materials.

Nanopore Sensing in Aqueous Two-Phase System: Simultaneous Enhancement of Signal and Translocation Time via Conformal Coating.

Nanofluidic resistive pulse sensing (RPS) has been extensively used to measure the size, concentration, and surface charge of nanoparticles in electrically conducting solutions. Although various methods have been explored for improving detection performances, intrinsic problems including the extremely low particle-to-pore volume ratio (<0.01%) and fast nanoparticle translocation (10-1000 µs) still induce difficulties in detection, such as low signal magnitudes and short translocation times.

Facile One-pot Transformation of Iron Oxides from Fe2O3 Nanoparticles to Nanostructured Fe3O4@C Core-Shell Composites via Combustion Waves.

The development of a low-cost, fast, and large-scale process for the synthesis and manipulation of nanostructured metal oxides is essential for incorporating materials with diverse practical applications. Herein, we present a facile one-pot synthesis method using combustion waves that simultaneously achieves fast reduction and direct formation of carbon coating layers on metal oxide nanostructures. Hybrid composites of Fe2O3 nanoparticles and nitrocellulose on the cm scale were fabricated by a wet impregnation process.

Enhanced Photocatalytic Activity of Bismuth Precursor by Rapid Phase and Surface Transformation Using Structure-Guided Combustion Waves.

The development of an efficient method for manipulating phase and surface transformations would facilitate the improvement of catalytic materials for use in a diverse range of applications. Herein, we present the first instance of a submicrosecond time frame direct phase and surface transformation of Bi(NO3)3 rods to nanoporous β-Bi2O3 rods via structure-guided combustion waves. Hybrid composites of the prepared Bi(NO3)3·H2O rods and organic fuel were fabricated by a facile preparation method.

Effect of alumina composition and surface integrity in alumina/epoxy composites on the ultrasonic attenuation properties.

We report a method of fabricating backing blocks for ultrasonic imaging transducers, using alumina/epoxy composites. Backing blocks contain scatterers such as alumina particles interspersed in the epoxy matrix for the effective scattering and attenuation of ultrasound. Here, the surface integrity can be an issue, where the composite material may be damaged during machining because of differences in strength, hardness and brittleness of the hard alumina particles and the soft epoxy matrix.

Manipulation of combustion waves in carbon-nanotube/fuel composites by highly reactive Mg nanoparticles.

Manipulating the interface of micro/nanostructured materials and chemical fuels can change the fundamental characteristics of combustion waves that are generated during a reaction. In this study, we report that Mg/MgO nanoparticles actively amplify the propagation of combustion waves at the interface of multi-walled carbon nanotubes (MWCNTs) and chemical fuels. Fuel/MWCNT and fuel/MWCNT-Mg/MgO composite films were prepared by a facile synthetic method.

Voltage amplification of thermopower waves via current crowding at high resistances in self-propagating combustion waves.

Combustion wave propagation in micro/nanostructured materials generates a chemical-thermal-electrical energy conversion, which enables the creation of an unusual source of electrical energy, called a thermopower wave. In this paper, we report that high electrical resistance regimes would significantly amplify the output voltage of thermopower waves, because the current crowding creates a narrow path for charge carrier transport. We show that the structurally defective regions in the hybrid composites of chemical fuels and carbon nanotube (CNT) arrays determine both the resistance levels of the hybrid composites and the corresponding output voltage of thermopower waves.

Phase Transformations of Cobalt Oxides in CoxOy-ZnO Multipod Nanostructures via Combustion from Thermopower Waves.

The study of combustion at the interfaces of materials and chemical fuels has led to developments in diverse fields such as materials chemistry and energy conversion. Recently, it has been suggested that thermopower waves can utilize chemical-thermal-electrical-energy conversion in hybrid structures comprising nanomaterials and combustible fuels to produce enhanced combustion waves with concomitant voltage generation. In this study, this is the first time that the direct phase transformation of Co-doped ZnO via instant combustion waves and its applications to thermopower waves is presented.