Yb-doped tapered double-clad fibers with polarization maintenance for half-kW power amplifiers.

Amplifying short pulses directly within a single fiber laser system has proven to be a challenging task, primarily due to thermally induced transverse mode instabilities and detrimental nonlinear effects. Another demanding aspect is preserving the linear polarization state at high power levels, which is even more pronounced for ultra-large-mode area fibers. This study demonstrates significant advancement in the direct amplification of narrow linewidth short pulses from tens of mW to several hundreds of Watts in a single-stage amplification, maintaining a high degree of linear polarization at the maximum output power.

From Fiber Layout to the Sensor: Preparation Methods as Key Factors for High-Quality Coupled-Core-Fiber Sensors.

During recent years, the optical-fiber-based simultaneous sensing of strain and temperature has attracted increased interest for different applications, e.g., in medicine, architecture, and aerospace.

1.8 mJ pulses at 1560 nm based on a 55 µm core pure-erbium-doped VLMA fiber.

Despite the increasing demand for high-energy erbium lasers for LIDAR imaging applications, the scaling of the current Er-Yb co-doped technology is still hindered by a 1 µm parasitic emission. In this study, we present the first, to the best of our knowledge, utilization of the REPUSIL powder synthesis method to fabricate a 55 µm double-clad fiber with a remarkably large modal area. Doped solely with erbium and free of ytterbium, its estimated cladding absorption is 2 dB/m at 976 nm, enabling short amplification lengths.

Pr-doped YPO nanocrystal embedded into an optical fiber.

Optical fiber with YPO:Pr nanocrystals (NCs) is presented for the first time using the glass powder-NCs doping method. The method's advantage is separate preparation of NCs and glass to preserve luminescent and optical properties of NCs once they are incorporated into optical fiber. The YPO:Pr nanocrystals were synthesized by the co-precipitation and hydrothermal methods, optimized for size (< 100 nm), shape, Pr ions concentration (0.

Generation of infrared photon pairs by spontaneous four-wave mixing in a CS-filled microstructured optical fiber.

We experimentally demonstrate frequency non-degenerate photon-pair generation via spontaneous four-wave mixing from a novel CS-filled microstructured optical fiber. CS has high nonlinearity, narrow Raman lines, a broad transmission spectrum, and also has a large index contrast with the microstructured silica fiber. We can achieve phase matching over a large spectral range by tuning the pump wavelength, allowing the generation of idler photons in the infrared region, which is suitable for applications in quantum spectroscopy.

Double-clad ytterbium-doped tapered fiber with circular birefringence as a gain medium for structured light.

Amplifying radially and azimuthally polarized beams is a significant challenge due to the instability of the complex beam shape and polarization in inhomogeneous environment. In this Letter, we demonstrated experimentally an efficient approach to directly amplify cylindrical-vector beams with axially symmetric polarization and doughnut-shaped intensity profile in a picosecond MOPA system based on a double-clad ytterbium-doped tapered fiber. To prevent polarization and beam shape distortion during amplification, for the first time to the best of our knowledge, we proposed using the spun architecture of the tapered fiber.

Highly birefringent microstructured optical fiber for distributed hydrostatic pressure sensing with sub-bar resolution.

We demonstrate distributed optical fiber-based pressure measurements with sub-bar pressure resolution and 1 m spatial resolution over a ∼100 m distance using a phase-sensitive optical time-domain reflectometry technique. To do so, we have designed a novel highly birefringent microstructured optical fiber that features a high pressure to temperature sensitivity ratio, a high birefringence and a mode field diameter that is comparable to that of conventional step-index single mode fibers. Our experiments with two fibers fabricated according to the design confirm the high polarimetric pressure sensitivities (-62.

Pre-compensation of thermally induced refractive index changes in a depressed core fully aperiodic large-pitch fiber for high average power operation.

To prevent the thermally induced spatial beam degradation occurring in high-power fiber lasers and amplifiers, index-depressed core "fully aperiodic large-pitch fibers" (FA-LPFs) have been designed and fabricated. In contrast to previous experimental works performed on FA-LPFs, in which the active core and the surrounding cladding material are quasi-index-matched, the core refractive index is in slight depression compared to the surrounding material (≈-3×10). Thus, the index-depressed fiber core tends first to behave as an anti-guide, preventing light from being properly guided into it.

Controlling Growth of Poly (Triethylene Glycol Acrylate--Spiropyran Acrylate) Copolymer Liquid Films on a Hydrophilic Surface by Light and Temperature.

A quartz crystal microbalance with dissipation monitoring (QCM-D) was employed for in situ investigations of the effect of temperature and light on the conformational changes of a poly (triethylene glycol acrylate--spiropyran acrylate) (P (TEGA--SPA)) copolymer containing 12-14% of spiropyran at the silica-water interface. By monitoring shifts in resonance frequency and in acoustic dissipation as a function of temperature and illumination conditions, we investigated the evolution of viscoelastic properties of the P (TEGA--SPA)-rich wetting layer growing on the sensor, from which we deduced the characteristic coil-to-globule transition temperature, corresponding to the lower critical solution temperature (LCST) of the PTEGA part. We show that the coil-to-globule transition of the adsorbed copolymer being exposed to visible or UV light shifts to lower LCST as compared to the bulk solution: the transition temperature determined acoustically on the surface is 4 to 8 K lower than the cloud point temperature reported by UV/VIS spectroscopy in aqueous solution.

Negative curvature hollow core fiber sensor for the measurement of strain and temperature.

Three different types of strain and temperature sensors based on negative curvature hollow core fiber (NCHCF) are proposed. Each sensor is produced by splicing a small section of the NCHCF between two sections of single mode fiber. Different types of interferometers are obtained simply by changing the splicing conditions.

Influence of pedestal diameter on mode instabilities in Yb/Ce/Al-doped fibers.

In this paper we present numerical and experimental results revealing that the mode instability threshold of highly Yb-doped, Ce/Al co-doped pedestal fibers is affected by the size of the index-increased pedestal structure surrounding the core. An alternative preparation technology for the realization of large mode area fibers with very large Al-doped silica pedestals is introduced. Three different pedestal fiber design iterations characterized by low photodarkening were manufactured and tested in counter-pumped amplifier setups.

2 MW peak power generation in fluorine co-doped Yb fiber prepared by powder-sinter technology.

We report on the first, to the best of our knowledge, implementation of a fluorine co-doped large-mode-area REPUSIL fiber for high peak power amplification in an ultrashort-pulse master oscillator power amplifier. The core material of the investigated step-index fiber with high Yb-doping level, 52 µm core and high core-to-clad ratio of 1:4.2 was fabricated by means of the REPUSIL powder-sinter technology.

Sodium Ion Conductivity in Superionic IL-Impregnated Metal-Organic Frameworks: Enhancing Stability Through Structural Disorder.

Metal-organic frameworks (MOFs) are intriguing host materials in composite electrolytes due to their ability for tailoring host-guest interactions by chemical tuning of the MOF backbone. Here, we introduce particularly high sodium ion conductivity into the zeolitic imidazolate framework ZIF-8 by impregnation with the sodium-salt-containing ionic liquid (IL) (NaEMIM)TFSI. We demonstrate an ionic conductivity exceeding 2 × 10 S · cm at room temperature, with an activation energy as low as 0.

Widely tunable Q-switched dual-wavelength synchronous-pulsed Tm-doped fiber laser emitting in the 2  μm region.

We demonstrate a widely tunable Q-switched dual-wavelength fiber laser emitting synchronized pulses in the 2 μm spectral range. Owing to the use of a Tm-doped rod-type fully aperiodic large pitch fiber, together with an acousto-optic modulator and two volume Bragg gratings (VBGs), the wavelength separation was shown to be continuously tunable from 1 to 120 nm (∼0.1-10  THz).

Biomimetic light dilution using side-emitting optical fiber for enhancing the productivity of microalgae reactors.

Photoautotrophic microbes present vast opportunities for sustainable lipid production, CO storage and green chemistry, for example, using microalgae beds to generate biofuels. A major challenge of microalgae cultivation and other photochemical reactors is the efficiency of light delivery. In order to break even on large scale, dedicated photon management will be required across all levels of reactor hierarchy - from the harvesting of light and its efficient injection and distribution inside of the reactor to the design of optical antenna and pathways of energy transfer on molecular scale.

Boson peak, heterogeneity and intermediate-range order in binary SiO-AlO glasses.

In binary aluminosilicate liquids and glasses, heterogeneity on intermediate length scale is a crucial factor for optical fiber performance, determining the lower limit of optical attenuation and Rayleigh scattering, but also clustering and precipitation of optically active dopants, for example, in the fabrication of high-power laser gain media. Here, we consider the low-frequency vibrational modes of such materials for assessing structural heterogeneity on molecular scale. We determine the vibrational density of states VDoS g(ω) using low-temperature heat capacity data.

Fast, Label-Free Tracking of Single Viruses and Weakly Scattering Nanoparticles in a Nanofluidic Optical Fiber.

High-speed tracking of single particles is a gateway to understanding physical, chemical, and biological processes at the nanoscale. It is also a major experimental challenge, particularly for small, nanometer-scale particles. Although methods such as confocal or fluorescence microscopy offer both high spatial resolution and high signal-to-background ratios, the fluorescence emission lifetime limits the measurement speed, while photobleaching and thermal diffusion limit the duration of measurements.

Fabry-Perot cavity based on silica tube for strain sensing at high temperatures.

In this work, a Fabry-Perot cavity based on a new silica tube design is proposed. The tube presents a cladding with a thickness of ~14 μm and a hollow core. The presence of four small rods, of ~20 μm diameter each, placed in diametrically opposite positions ensure the mechanical stability of the tube.

Origins of modal loss of antiresonant hollow-core optical fibers in the ultraviolet.

Recently, a novel antiresonant hollow core fiber was introduced having promising UV guiding properties. Accompanying simulations predicted ten times lower loss than observed experimentally. Increasing loss is observed in many antiresonant fibers with the origin being unknown.

Double antiresonant hollow core fiber--guidance in the deep ultraviolet by modified tunneling leaky modes.

Guiding light inside the hollow cores of microstructured optical fibers is a major research field within fiber optics. However, most of current fibers reveal limited spectral operation ranges between the mid-visible and the infrared and rely on complicated microstructures. Here we report on a new type of hollow-core fiber, showing for the first time distinct transmission windows between the deep ultraviolet and the near infrared.

Optical breathing of nano-porous antireflective coatings through adsorption and desorption of water.

We report on the direct consequences of reversible water adsorption on the optical performance of silica-based nanoporous antireflective (AR) coatings as they are applied on glass in photovoltaic and solar thermal energy conversion systems. In situ UV-VIS transmission spectroscopy and path length measurements through high-resolution interferometric microscopy were conducted on model films during exposure to different levels of humidity and temperature. We show that water adsorption in the pores of the film results in a notable increase of the effective refractive index of the coating.

High-sensitivity dispersive Mach-Zehnder interferometer based on a dissimilar-doping dual-core fiber for sensing applications.

A dual-core fiber in which one of the cores is doped with germanium and the other with phosphorus is used as an in-line Mach-Zehnder dispersive interferometer. By ensuring an equal length but with different dispersion dependencies in the interferometer arms (the two cores), high-sensitivity strain and temperature sensing are achieved. Opposite sensitivities for high and low wavelength peaks were also demonstrated when strain and temperature was applied.

Roughness-induced acoustic second-harmonic generation during electrochemical metal deposition on the quartz-crystal microbalance.

This paper reports on the relation between the surface roughness and emission of compressional waves from the surface of an electrochemical quartz-crystal microbalance. The detection of the compressional waves took place with an ultrasonic microphone and the quartz crystal itself. As a model process, the electrochemical deposition of copper from an acidic copper sulfate solution has been chosen.

Acoustic second harmonic generation from rough surfaces under shear excitation in liquids.

Emission of compressional acoustic waves at the second harmonic frequency (second harmonic generation, SHG) is possible from rough surfaces undergoing oscillatory shear in liquids. This nonlinear response is a consequence of the inertial term in the Navier-Stokes equation. On a corrugated surface, the streamlines of the sheared liquid are not strictly parallel to the surface, leading to variation of pressure along the streamlines and a concomitant Bernoulli pressure.