Novel multifibrillar carbon and oxidation-stable carbon/ceramic hybrid fibers consisting of thousands of individual nanofibers with high tensile strength.

In this study, multifibrillar carbon and carbon/ceramic (C/SiCON) fibers consisting of thousands of single nanofibers are continuously manufactured. The process starts with electrospinning of polyacrylonitrile (PAN) and PAN/oligosilazane precursors resulting in poorly aligned polymer fibers. Subsequent stretching leads to parallel aligned multifibrillar fibers, which are continuously stabilized and pyrolyzed to C or C/SiCON hybrid fibers.

Fluorescence Enhancement of Single V2 Centers in a 4H-SiC Cavity Antenna.

Solid state quantum emitters are a prime candidate in distributed quantum technologies since they inherently provide a spin-photon interface. An ongoing challenge in the field, however, is the low photon extraction due to the high refractive index of typical host materials. This challenge can be overcome using photonic structures.

High-Fidelity Optical Readout of a Nuclear-Spin Qubit in Silicon Carbide.

Quantum state readout is a key requirement for a successful qubit platform. In this work, we demonstrate a high-fidelity quantum state readout of a V2 center nuclear spin based on a repetitive readout technique. We demonstrate up to 99.

Excited-State Lifetime of NV Centers for All-Optical Magnetic Field Sensing.

We investigate the magnetic field-dependent fluorescence lifetime of microdiamond powder containing a high density of nitrogen-vacancy centers. This constitutes a non-intensity quantity for robust, all-optical magnetic field sensing. We propose a fiber-based setup in which the excitation intensity is modulated in a frequency range up to 100MHz.

Qudit-Based Spectroscopy for Measurement and Control of Nuclear-Spin Qubits in Silicon Carbide.

Nuclear spins with hyperfine coupling to single electron spins are highly valuable quantum bits. Here we probe and characterize the particularly rich nuclear-spin environment around single silicon vacancy color centers (V2) in 4H-SiC. By using the electron spin-3/2 qudit as a four level sensor, we identify several sets of ^{29}Si and ^{13}C nuclear spins through their hyperfine interaction.

Fluorescence Lifetime Control of Nitrogen Vacancy Centers in Nanodiamonds for Long-Term Information Storage.

Today's huge amount of data generation and transfer induced an urgent requirement for long-term data storage. Here, we demonstrate and discuss a concept for long-term storage using NV centers inside nanodiamonds. The approach is based upon the radiation-induced generation of additional vacancies (so-called GR1 states), which quench the initial NV centers, resulting in a reduced overall fluorescence lifetime of the NV center.

Biomimetic crosslinking of collagen gels by energetic electrons: The role of L-lysine.

Energetic electrons have recently evolved as a powerful tool for crosslinking bio-derived hydrogels without the need for adding potentially hazardous reagents. Application of this approach allows for synthesis of biomimetic collagen-derived networks of highly tunable properties and functionalization. Yet, the underlying reaction kinetics are still not sufficiently established at this point.

Radiation-Induced Graft Immobilization (RIGI): Covalent Binding of Non-Vinyl Compounds on Polymer Membranes.

Radiation-induced graft immobilization (RIGI) is a novel method for the covalent binding of substances on polymeric materials without the use of additional chemicals. In contrast to the well-known radiation-induced graft polymerization (RIGP), RIGI can use non-vinyl compounds such as small and large functional molecules, hydrophilic polymers, or even enzymes. In a one-step electron-beam-based process, immobilization can be performed in a clean, fast, and continuous operation mode, as required for industrial applications.

Gelling Amphotericin B Nanofibers: A New Option for the Treatment of Keratomycosis.

The purpose of our research was the development of Amphotericin B-loaded gelling nanofibers for the treatment of keratomycosis. Different formulation strategies were applied to increase the drug load of the sparingly water-soluble Amphotericin B in electrospun Gellan Gum/Pullulan fibers. These include bile salt addition, encapsulation in poly(lactic-co-glycolic acid) (PLGA) nanoparticles and formation of a polymeric Amphotericin B polyelectrolyte complex.

Electrospun Nimodipine-loaded fibers for nerve regeneration: Development and in vitro performance.

Nimodipine is a 1,4-Dihydropyridine type calcium antagonist routinely used to control blood pressure and reduce the risk of secondary ischemia after aneurismal subarachnoid hemorrhage. Additionally, Nimodipine has unique neuroprotective properties. With respect to brain related applications, the full potential of the desired local effect can often not be realized after systemic administration due to systemic side effects.

Controlling the fluorescence properties of nitrogen vacancy centers in nanodiamonds.

Control over the formation and fluorescence properties of nitrogen vacancy (NV) centers in nanodiamonds (NDs) is an important factor for their use in medical and sensor applications. However, reports providing a deep understanding of the potential factors influencing these properties are rare and focus only on a few influencing factors. The current contribution targets this issue and we report a comprehensive study of the fluorescence properties of NVs in nanodiamonds as a function of electron irradiation fluence and surface termination.

Self-initiation of UV photopolymerization reactions using tetrahalogenated bisphenol A (meth)acrylates.

The potential of tetrachlorinated and tetrabrominated bisphenol A diacrylates and dimethacrylates for self-initiation of a radical photopolymerization was investigated. The kinetics of the photopolymerization of an acrylic model varnish containing halogenated monomers was studied by real-time FTIR spectroscopy, whereas the formation of reactive species and secondary products was elucidated by laser flash photolysis and product analysis by GC-MS after steady-state photolysis. The interpretation of the experimental data and the analysis of possible reaction pathways were assisted by quantum chemical calculations.

Peculiarities of the photoinitiator-free photopolymerization of pentabrominated and pentafluorinated aromatic acrylates and methacrylates.

Pentabrominated and fluorinated aromatic (meth)acrylates as well as their non-halogenated counterparts have been studied with the aim to avoid conventional photoinitiators and to overcome some negative consequences related to their use. Therefore, RTIR spectroscopy, laser flash photolysis and GC/MS were utilized. Even low concentrations (1 to 5 wt%) of brominated (meth)acrylates in the model varnish lead to initiation of a photopolymerization reaction under exposure to UV light with λ > 300 nm.

High quality reduced graphene oxide flakes by fast kinetically controlled and clean indirect UV-induced radical reduction.

This work highlights a surprisingly simple and kinetically controlled highly efficient indirect method for the production of high quality reduced graphene oxide (rGO) flakes via UV irradiation of aqueous dispersions of graphene oxide (GO), in which the GO is not excited directly. While the direct photoexcitation of aqueous GO (when GO is the only light-absorbing component) takes several hours of reaction time at ambient temperature (4 h) leading only to a partial GO reduction, the addition of small amounts of isopropanol and acetone (2% and 1%) leads to a dramatically shortened reaction time by more than two orders of magnitude (2 min) and a very efficient and soft reduction of graphene oxide. This method avoids the formation of non-volatile species and in turn contamination of the produced rGO and it is based on the highly efficient generation of reducing carbon centered isopropanol radicals via the reaction of triplet acetone with isopropanol.

How fast is the reaction of hydrated electrons with graphene oxide in aqueous dispersions?

Understanding the mechanism of the reduction of graphene oxide (GO) is a key-question in graphene related materials science. Here, we investigate the kinetics of the reaction of radiolytically generated hydrated electrons with GO in water. The electron transfer proceeds on the ns time scale and not on the ps time scale, as recently reported by Gengler et al.

The dynamical behavior of the s-trioxane radical cation-A low-temperature EPR and theoretical study.

The radical cation of s-trioxane, radiolytically generated in a freon (CF3CCl3) matrix, was studied in the 10-140 K temperature region. Reversible changes of the EPR spectra were observed, arising from both ring puckering and ring inversion through the molecular plane. The ESREXN program based on the Liouville density matrix equation, allowing the treatment of dynamical exchange, has been used to analyze the experimental results.

Tailoring the material properties of gelatin hydrogels by high energy electron irradiation.

Natural hydrogels such as gelatin are highly desirable biomaterials for application in drug delivery, biosensors, bioactuators and extracellular matrix components due to strong biocompatibility and biodegradability. Typically, chemical crosslinkers are used to optimize material properties, often introducing toxic byproducts into the material. In this present work, electron irradiation is employed as a reagent-free crosslinking technique to precisely tailor the viscoelasticity, swelling behavior, thermal stability and structure of gelatin.

Electron-beam generated porous dextran gels: experimental and quantum chemical studies.

Purpose: The aim of this work was to investigate the reaction mechanism of electron-beam generated macroporous dextran cryogels by quantum chemical calculation and electron paramagnetic resonance measurements.

Methods: Electron-beam radiation was used to initiate the cross-linking reaction of methacrylated dextran in semifrozen aqueous solutions. The pore morphology of the resulting cryogels was visualized by scanning electron microscopy.

Mechanistic aspects of the radiation-chemical reduction of graphene oxide to graphene-like materials.

Purpose: The aim of the work was to investigate mechanistic details of the preparation of graphene-like materials (GLM) via reduction of graphene oxide (GO) in aqueous dispersions by electron beam (EB) generated reducing free radicals.

Materials And Methods: A 10 MeV linear accelerator was employed to irradiate aqueous GO dispersions at ambient temperatures. The kinetics of GO reduction was followed using UV-Vis spectroscopy.

Reaction of gadolinium chelates with ozone and hydroxyl radicals.

Gadolinium chelates are used in increasing amounts as contrast agents in magnetic resonance imaging, and their fate in wastewater treatment has recently become the focus of research. Oxidative processes, in particular the application of ozone, are currently discussed or even implemented for advanced wastewater treatment. However, reactions of the gadolinium chelates with ozone are not yet characterized.

Degradation of ozone-refractory organic phosphates in wastewater by ozone and ozone/hydrogen peroxide (peroxone): the role of ozone consumption by dissolved organic matter.

Ozonation is very effective in eliminating micropollutants that react fast with ozone (k > 10(3) M(-1) s(-1)), but there are also ozone-refractory (k < 10 M(-1) s(-1)) micropollutants such as X-ray contrast media, organic phosphates, and others. Yet, they are degraded upon ozonation to some extent, and this is due to (•)OH radicals generated in the reaction of ozone with organic matter in wastewater (DOM, determined as DOC). The elimination of tri-n-butyl phosphate (TnBP) and tris-2-chloroisopropyl phosphate (TCPP), added to wastewater in trace amounts, was studied as a function of the ozone dose and found to follow first-order kinetics.

222 nm Photo-induced radical reactions in silazanes. A combined laser photolysis, EPR, GC-MS and QC Study.

The initiation mechanism of the VUV-induced conversion of polyorganosilazanes into methyl-Si-O-Si networks was studied by means of model disilazane compounds. A combined experimental approach was chosen to determine the primary radicals and their properties (lifetimes, spectra) as well as the major final products. It was verified that both Si-N and Si-CH(3) cleavage occur in the condensed phase, the former with higher yield.

Vacuum-UV irradiation-based formation of methyl-Si-O-Si networks from poly(1,1-dimethylsilazane-co-1-methylsilazane).

The vacuum-UV (VUV)-induced conversion of commercially available poly(1,1-dimethylsilazane-co-1-methylsilazane) into methyl-Si-O-Si networks was studied using UV sources at wavelengths around 172, 185, and 222 nm, respectively. Time-of-flight secondary ion mass spectroscopy (TOF-SIMS), X-ray photo electron spectroscopy (XPS), and Fourier transform infrared (FTIR) measurements, as well as kinetic investigations, were carried out to elucidate the degradation process. First-order kinetics were found for the photolytically induced decomposition of the Si-NH-Si network, the subsequent formation of the methyl-Si-O-Si network and the concomitant degradation of the Si-CH(3) bond, which were additionally independent of the photon energy above a threshold of about 5.