The degree and source of plastic recyclates contamination with polycyclic aromatic hydrocarbons.

In this research, the degree and source of recyclates contamination with polycyclic aromatic hydrocarbons (PAH) was studied in eight different polyolefin recyclate samples; four originating from post-consumer packaging waste and four originating from a mixed source (post-industrial, post-commercial, and post-consumer). The aim was to assess the applicability of these recyclates in the different products' categories. Furthermore, the impact of previous contamination with PAH was excluded by analysing pure plastics before and after undergoing simulated recycling processes.

Reduction of fuel side costs due to biomass co-combustion.

The feasibility and influence of co-combustion of woody biomass on the fuel side costs is discussed for three hard coal power plants located in Berlin, Germany. Fuel side costs are defined as the costs resulting from flue gas cleaning and by-products. To have reliable data, co-firing tests were conducted in two power plants (i.

Extent and mechanism of metal ion incorporation into precipitated ferrites.

The ability of many noniron metals to be incorporated into the structure of ferrites is being utilized in numerous industrial and environmental applications. The incorporation of some of these metals during Fe(II) oxidation-induced precipitation at moderate temperatures (80-100°C) appears to be limited, for reasons not fully understood, and to extents not always agreed (e.g.

Iron-oxidation processes in an electroflocculation (electrocoagulation) cell.

The processes of iron oxidation in an electroflocculation cell were investigated for a pH range of 5-9 and electric currents of 0.05-0.4A (equivalent current densities of 8.

Removal of Zn(II), Cu(II), Ni(II), Ag(I) and Cr(VI) present in aqueous solutions by aluminium electrocoagulation.

The performance of an electrocoagulation system with aluminium electrodes for removing heavy metal ions (Zn2+, Cu2+, Ni2+, Ag+, Cr2O7(2-)) on laboratory scale was studied systematically. Several parameters - such as initial metal concentration, numbers of metals present, charge loading and current density - and their influence on the electrocoagulation process were investigated. Initial concentrations from 50 to 5000 mg L(-1) Zn, Cu, Ni and Ag did not influence the removal rates, whereas higher initial concentrations caused higher removal rates of Cr.

Studies on electrochemical treatment of wastewater contaminated with organotin compounds.

Different anode materials were tested to evaluate their suitability to eliminate organotin compounds electrochemically from shipyard process waters. The capacity of two types of anode materials was investigated: niobium coated with boron-doped diamond (BDD) and titanium coated with iridium dioxide, (Ti/IrO(2)). The aim of this work was to characterize the performance of the process using both anode materials at different current densities, and also to evaluate the generation of by-products.

Topics of water sciences and technology.

In the preceding series of contributions to ESPR typical examples from actual fields of water chemistry were presented on various topics: integrated water quality management, diagnosis of water bodies, therapy of aquatic systems, and fitness for aquatic systems. These contributions clearly showed the need and importance of more intensive research. In the principle committee III 'Basic Research' of the Water Chemical Society, various expert groups work on scientific backgrounds in these fields.