Histomorphological analysis of the superficial musculoaponeurotic system in Macaca mulatta species.

Introduction: The superficial musculoaponeurotic system (SMAS) is a well described facial functional unit in humans. SMAS connects mimic musculature to the skin having many implication in facial mimic expression. One of the various morphological and physiological analogies in human and Macaca mulatta species is the facial mimic.

Human Gingival Fibroblast Adhesion and Proliferation on Hydroxyapatite-Coated Zirconia Abutment Surfaces.

Applying antibacterial coatings to dental implant materials seems reasonable but can have negative influences on desired cell adhesion and healing. In this study, zirconia abutment specimens interacting with gingival tissue were used. The aim was to compare the influence of machined or coated zirconia surfaces on the adhesion and proliferation of human gingival fibroblasts (HGF-1).

The Rhinobiome of Exacerbated Wheezers and Asthmatics: Insights From a German Pediatric Exacerbation Network.

Although the nose, as a gateway for organism-environment interactions, may have a key role in asthmatic exacerbation, the rhinobiome of exacerbated children with asthma was widely neglected to date. The aim of this study is to understand the microbiome, the microbial immunology, and the proteome of exacerbated children and adolescents with wheeze and asthma. Considering that a certain proportion of wheezers may show a progression to asthma, the comparison of both groups provides important information regarding clinical and phenotype stratification.

Cold Atmospheric Plasma Improves Shear Bond Strength of Veneering Composite to Zirconia.

Chipping of veneering is the most common clinical complication for zirconia restorations. Veneering composite could be a promising alternative to renew restorations. Zirconia discs (3-YSZ) were prepared with varying surface treatments and bonded to indirect composite as follows: air abrasion and Scotchbond Universal (A/SU); air abrasion and Clearfil Ceramic Primer (A/C); air abrasion and MKZ Primer (A/M); air abrasion and Monobond Plus (A/MP); silica-coating and Scotchbond Universal (S/SU); air abrasion (AP/SU), additional cold atmospheric plasma treatment, and Scotchbond Universal.

The mystery behind the nostrils - technical clues for successful nasal epithelial cell cultivation.

Objectives: Research involving the nose reveals important information regarding the morphology and physiology of the epithelium and its molecular response to agents. The role of nasal epithelial cells and other cell subsets within the nasal epithelium play an interesting translational split between experimental and clinical research studying respiratory disorders or pathogen reactions. With an additional technical manuscript including a detailed description of important technical aspects, tips, tricks, and nuances for a successful culturing of primary, human nasal epithelial cells (NAEPCs), we here aim to improve the process of communication between experimentalists and physicians, supporting the purpose of a fruitful work for future translational projects.

Correction: Schildgen, V., et al. Human Bocavirus Infection of Permanent Cells Differentiated to Air-Liquid Interface Cultures Activates Transcription of Pathways Involved in Tumorigenesis. 2018, , 410.

The authors wish to make the following correction to this paper [...

From Submerged Cultures to 3D Cell Culture Models: Evolution of Nasal Epithelial Cells in Asthma Research and Virus Infection.

Understanding the response to viral infection in the context of respiratory diseases is of significant importance. Recently, there has been more focus on the role of the nasal epithelium in disease modeling. Here, we provide an overview of different submerged, organotypic 3D and spheroid cell culture models of nasal epithelial cells, which were used to study asthma and allergy with a special focus on virus infection.

Do Current Asthma-Preventive Measures Appropriately Face the World Health Organization's Concerns: A Study Presentation of a New Clinical, Prospective, Multicentric Pediatric Asthma Exacerbation Cohort in Germany.

In summer 2017, the World Health Organization published 10 facts on asthma, which is known as a major non-communicable disease of high clinical and scientific importance with currently several hundred million people-with many children among them-suffering from air passages inflammation and narrowing. Importantly, the World Health Organization sees asthma as being underdiagnosed and undertreated. Consequently, much more efforts in clinical disease management and research need to be spent on reducing the asthma-related health burden.

Immunohistochemical evidence of striated muscle cells within midfacial superficial musculoaponeurotic system.

Introduction: The superficial musculoaponeurotic system (SMAS) is a controversial functional fibro-adipose layer that connects the mimic muscles to the skin and is involved in a variety of facial mimic expressions. The presence of muscle fibers within SMAS fibrous septa is hypothetical. The present study analyzed SMAS fibrous septa composition for the existence of striated muscle cells.

Shear bond strength of veneering composite to high performance polymers.

High performance polymers like PEEK (polyetheretherketone) and FRC (fiberreinforced composite) could substitute metallic alloys for removable partial dentures. However, these polymers require aesthetic veneering. This study was to determine the bond strength to direct composite.

House Dust Mite Exposure Causes Increased Susceptibility of Nasal Epithelial Cells to Adenovirus Infection.

Adenovirus (AdV) infections in the respiratory tract may cause asthma exacerbation and allergic predisposition, and the house dust mite (HDM) may aggravate virus-induced asthma exacerbations. However, the underlying mechanisms of whether and how AdV affects asthmatic patients remains unclear. To address this question, we investigated nasal epithelial cells (NAEPCs) derived from a pediatric exacerbation study cohort for experimental analyses.

Biofilm formation on different dental restorative materials in the oral cavity.

Background: Bacterial biofilms adhere to all tissues and surfaces in the oral cavity. Oral biofilms are responsible for the decay of human dental structures and the inflammatory degeneration of the alveolar bone. Moreover, oral biofilms on artificial materials influence the lifespan of dental prostheses and restoratives.

Depth of acid penetration and enamel surface roughness associated with different methods of interproximal enamel reduction.

Objectives: To assess and compare the enamel surface quality after interproximal enamel reduction (IPR) was performed with different systems and to study the relation between acid penetration depth and enamel surface quality as well as the importance of remineralization.

Methods: Sixty-five extracted teeth were randomly allocated to five experimental groups: untreated control, manual with New Metal Strips, mechanical with oscillating segment (OS) discs, Safe-Tipped Bur Kit, and the Ortho-Strip, followed by 30 s of polishing with the Softflex system and the Compo-system after treating the tooth with OS discs. Mesial surfaces were demineralized for 24 h and distal surfaces were subjected to interchanging demineralization and remineralization cycles of 24 h each for 18 days.

Three-Dimensional Reconstruction of the Genial Spinal Canal.

The aim of this anatomical study was to investigate the genial spinal canal histologically and to reconstruct it three-dimensionally to improve understanding of its anatomy and to reveal any differences between dentate and edentulous specimens. Two tissue blocks from the mandible between the left and right second incisors, one dentate and one edentulous, were fixed in 4.5% formaldehyde, decalcified and embedded in paraffin.

Randomized investigation of the bioavailability of fluoride in saliva after administration of sodium fluoride, amine fluoride and fluoride containing bioactive glass dentifrices.

Objectives: Bioactive glasses which degrade in aqueous solutions may release bioactive ions such as fluoride (F) and support fluoride bioavailability in saliva. We investigated how these effects would be apparent in an in vivo experimental trial after toothbrushing in comparison with sodium fluoride and amine fluoride.

Material And Methods: In this single-center, randomized, parallel in vivo trial with a three strata block design, where healthy subjects were randomly assigned into three groups.

Facial fold and crease development: A new morphological approach and classification.

Facial folds and creases are established descriptive anatomical terms for structures of which the morphological characteristics and origins are not clearly defined. The aim of this study was to perform a morphological investigation of the nasolabial fold (NLF), mandibular fold (MF), deep transverse forehead (DTFC), infraorbital fold (IOF) and upper eyelid fold (UEF), correlating their phenotypes to differences in the superficial musculoaponeurotic system (SMAS), noting morphological differences and similarities. Full-graft tissue blocks of skin, subcutaneous tissue, and mimic muscles collected postmortem were studied histologically.

Human Bocavirus Infection of Permanent Cells Differentiated to Air-Liquid Interface Cultures Activates Transcription of Pathways Involved in Tumorigenesis.

The parvoviral human bocavirus (HBoV) is a respiratory pathogen, able to persist in infected cells. The viral DNA has been identified in colorectal and lung tumors and thus it was postulated that the virus could be associated with tumorigenesis. This assumption was supported by the fact that in HBoV-infected patients and in an in vitro cell culture system, pro-cancerogenic and -fibrotic cytokines were expressed.

Influence of Luting Materials on the Retention of Cemented Implant-Supported Crowns: An In Vitro Study.

The retention force of cemented crowns on implant abutments with various luting materials was evaluated. Cobalt⁻chromium crowns were cemented onto tapered titanium abutments (Camlog) with eugenol-free temporary cement (RelyX TempBond NE), composite-based temporary cement (Bifix Temp), zinc phosphate cement (Harvard Cement), glass-ionomer cements (Meron, Fuji I), and resin-modified glass-ionomer cements (Fuji II, Fuji Plus, Ketac Cem Plus). Specimen aging via hydrostress was performed in artificial saliva at 37 °C for 14 days (S1), followed by hydrothermal stress with thermocycling (S2).

Marginal quality of ceramic inlays after three different instrumental cavity preparation methods of the proximal boxes.

Objectives: The marginal quality of ceramic inlays was evaluated after the use of three different instrumental finishing methods in mesio-occluso-distal (mod) cavity boxes in vitro after hydrothermal loading (HTL).

Materials And Methods: Caries-free human molars were divided into three groups. Mod-cavities were conventionally prepared.

Polishing of Monolithic Zirconia Crowns-Results of Different Dental Practitioner Groups.

This pilot study evaluates the surface roughness of monolithic zirconia crowns after chairside polishing by different dental practitioner groups. Four practitioner groups (group I: dental clinical students ( = 6); group II: dentists < 2 years post-qualification experience ( = 6); group III: dentists > 2 years post-qualification experience ( = 6) and group IV: dental technicians ( = 6)) were asked to polish two CAD/CAM-fabricated full-contour zirconia crowns (48 in total). A two-step zirconia polishing kit was used in both trials.

Wear Behavior of Ceramic CAD/CAM Crowns and Natural Antagonists.

Objective: Evaluation of wear behavior of computer-aided design/computer-aided manufacturing (CAD/CAM) crowns from various restorative materials and natural antagonists.

Method: Full CAD/CAM crowns fabricated with nanoceramic resin (Lava Ultimate (LU)), a glass ceramic in a resin interpenetrating matrix (Vita Enamic (VE)) and a lithium silicate reinforced ceramic enriched with zirconia (Vita Suprinity (VS)) were cemented on human molars. The crown and antagonists were subjected to simulated chewing.

Minor defects of the luminal integrity in arterial introducer eSheaths after transcatheter aortic valve implantation.

Background: Medical devices such as implant delivery systems are commonly used during minimally invasive procedures in the cardiovascular system. These devices often have lubricious polymer coatings to reduce friction between the device and blood vessels but coatings may separate and potentially cause serious injuries to patients.

Methods: Lubricious coated eSheaths for transcatheter heart valve implantation were assessed for luminal integrity at the proximal, medial and distal part.

Toothbrush abrasivity in a long-term simulation on human dentin depends on brushing mode and bristle arrangement.

Objective: The aim of this study was to evaluate the susceptibility of dentin to brushing abrasion using four different toothbrushes (rotating-oscillating, sonic and two types of manual toothbrushes) with the same brushing forces.

Methods: Dentin samples (n = 72) were selected from 72 impacted third molars. Half of the surface of dentin samples was covered with an adhesive tape, creating a protected and a freely exposed area in the same specimen.

Surface Roughness of Initial Enamel Caries Lesions in Human Teeth After Resin Infiltration.

Background: Low viscosity resin infiltration of initial caries lesions is a modern microinvasive method to treat initial cries lesions. However, only scarce information is available about the long-term surface alterations of infiltrated lesions.

Methods: Twenty-eight premolar teeth exhibiting non-cavitated initial caries lesions (International Caries Detection and Assessment System (ICDAS code 1&2)) were divided into two groups, one of which was infiltrated with resin, and the other remained untreated.

Adhesion of different resin cements to enamel and dentin.

The purpose of this in vitro study was to compare the shear bond strength (SBS) of five different resin cements to human enamel and dentin under different storage conditions. Five resin cements and their dedicated systems were tested. Teeth were embedded, ground flat to expose enamel or dentin and polished with sandpaper.