X-ray Fluorescence Techniques for Element Abundance Analysis in Wine.

The elemental composition has been extensively used to characterize wine and to find correlations with environmental and winemaking factors. Although X-ray fluorescence (XRF) techniques offer many advantages, they have been rarely used for wine analysis. Here, we show the comparison of wine elemental composition results obtained by total reflection X-ray fluorescence (TXRF) and energy dispersive X-ray fluorescence (EDXRF) for elements K, Ca, Mn, Fe, Cu, Zn, Br, Rb, and Sr.

Thickness determination of the tidemark of human articular cartilage using high-resolution micro-XRF imaging of zinc and lead.

Objective: The objective of the study was to specify the thickness of Zn and Pb accumulation within the tidemark (TM), a narrow structure between the non-calcified and the calcified articular cartilage. It is considered an active or resting calcification front. This banded structure of the cartilage-bone interface is known to undergo changes in osteoarthritis.

A monochromatic confocal micro-x-ray fluorescence (μXRF) spectrometer for the lab.

Confocal micro-x-ray fluorescence (μXRF) is a powerful tool to analyze the spatial distribution of major, minor, and trace elements in three dimensions. Typical (confocal) μXRF measurements in the lab use polychromatic excitation, complicating quantification and fundamental parameter-based corrections and furthermore deteriorating peak-to-background ratios due to scattered bremsstrahlung. The goal for the new setup was to remedy these problems, without sacrificing spatial resolution, and keep it flexible for different excitation energies and transportation to other sources.

Measurement of the ^{229}Th Isomer Energy with a Magnetic Microcalorimeter.

We present a measurement of the low-energy (0-60 keV) γ-ray spectrum produced in the α decay of ^{233}U using a dedicated cryogenic magnetic microcalorimeter. The energy resolution of ∼10  eV, together with exceptional gain linearity, allows us to determine the energy of the low-lying isomeric state in ^{229}Th using four complementary evaluation schemes. The most precise scheme determines the ^{229}Th isomer energy to be 8.

Total reflection X-ray fluorescence analysis of elemental composition of herbal infusions and teas.

Background: The elemental composition of herbal infusions and teas has not been sufficiently investigated. It could potentially be used for defining fingerprints for individual herbal / tea infusions, differentiation of botanical families, detecting the influence of packaging, and other purposes. The objective of this study was to determine the elemental composition, including the trace element content, of various herbal infusions and teas by means of total reflection X-ray fluorescence analysis (TXRF), with a chemometrics approach using principal component analysis (PCA).

Detection and imaging of gadolinium accumulation in human bone tissue by micro- and submicro-XRF.

Gadolinium-based contrast agents (GBCAs) are frequently used in patients undergoing magnetic resonance imaging. In GBCAs gadolinium (Gd) is present in a bound chelated form. Gadolinium is a rare-earth element, which is normally not present in human body.

Elemental imaging of trace elements in bone samples using micro and nano-X-ray fluorescence spectrometry.

Our group employs micro- and nano-X-ray fluorescence spectrometry (XRF) for the investigation of bone tissue. The manuscript presents the results of 3 various projects, in which spatial distribution of trace elements in bone samples was studied. The first study investigated the distribution of the elemental constituents of Mg-based implants at various stages of the degradation process in surrounding bone tissue with a focus on magnesium (Mg) and yttrium (Y).

Dual energy-band excitation from a low power Rh anode X-ray tube for the simultaneous determination of low Z and high Z elements (Na-U) using total-reflection X-ray fluorescence analysis (TXRF).

This article presents results from an experimental setup for a dual energy-band vacuum spectrometer for total-reflection X-ray fluorescence analysis allowing simultaneous efficient excitation of low, medium, and high Z elements. The spectrometer is equipped with an air-cooled 35 W low power Rh X-ray tube and a 17 mm silicon drift detector with a thin 8 m beryllium window. A Pd/BC multilayer monochromator is used at the same time as a Bragg reflector for Rh-Kα radiation and as a high-energy cut-off reflector above 5 keV, where the characteristic Rh-L radiation is totally reflected and present in the spectrum of the exciting radiation.

µXRF Elemental Mapping of Bioresorbable Magnesium-Based Implants in Bone.

This study investigated the distribution of the elemental constituents of Mg-based implants at various stages of the degradation process in surrounding bone tissue, with a focus on magnesium (Mg), as the main component of the alloy, and yttrium (Y), due to its potential adverse health effects. The measurements were performed on the implant-bearing thin sections of rat bone in a time series of implant degradation between one and 18 months. Micro X-ray fluorescence analysis (μXRF) with a special spectrometer meeting the requirements for the measurements of low-Z elements was used.

Increased zinc accumulation in mineralized osteosarcoma tissue measured by confocal synchrotron radiation micro X-ray fluorescence analysis.

Abnormal tissue levels of certain trace elements such as zinc (Zn) were reported in various types of cancer. Little is known about the role of Zn in osteosarcoma. Using confocal synchrotron radiation micro X-ray fluorescence analysis, we characterized the spatial distribution of Zn in high-grade sclerosing osteosarcoma of nine patients (four women/five men; seven knee/one humerus/one femur) following chemotherapy and wide surgical resection.

Synchrotron radiation micro X-ray fluorescence spectroscopy of thin structures in bone samples: comparison of confocal and color X-ray camera setups.

In the quest for finding the ideal synchrotron-radiation-induced imaging method for the investigation of trace element distributions in human bone samples, experiments were performed using both a scanning confocal synchrotron radiation micro X-ray fluorescence (SR-µXRF) (FLUO beamline at ANKA) setup and a full-field color X-ray camera (BAMline at BESSY-II) setup. As zinc is a trace element of special interest in bone, the setups were optimized for its detection. The setups were compared with respect to count rate, required measurement time and spatial resolution.

A setup for synchrotron-radiation-induced total reflection X-ray fluorescence and X-ray absorption near-edge structure recently commissioned at BESSY II BAMline.

An automatic sample changer chamber for total reflection X-ray fluorescence (TXRF) and X-ray absorption near-edge structure (XANES) analysis in TXRF geometry was successfully set up at the BAMline at BESSY II. TXRF and TXRF-XANES are valuable tools for elemental determination and speciation, especially where sample amounts are limited (<1 mg) and concentrations are low (ng ml(-1) to µg ml(-1)). TXRF requires a well defined geometry regarding the reflecting surface of a sample carrier and the synchrotron beam.

A novel vacuum spectrometer for total reflection x-ray fluorescence analysis with two exchangeable low power x-ray sources for the analysis of low, medium, and high Z elements in sequence.

The extension of the detectable elemental range with Total Reflection X-ray Fluorescence (TXRF) analysis is a challenging task. In this paper, it is demonstrated how a TXRF spectrometer is modified to analyze elements from carbon to uranium. Based on the existing design of a vacuum TXRF spectrometer with a 12 specimen sample changer, the following components were renewed: the silicon drift detector with 20 mm(2) active area and having a special ultra-thin polymer window allowing the detection of elements from carbon upwards.

Combined evaluation of grazing incidence X-ray fluorescence and X-ray reflectivity data for improved profiling of ultra-shallow depth distributions.

The continuous downscaling of the process size for semiconductor devices pushes the junction depths and consequentially the implantation depths to the top few nanometers of the Si substrate. This motivates the need for sensitive methods capable of analyzing dopant distribution, total dose and possible impurities. X-ray techniques utilizing the external reflection of X-rays are very surface sensitive, hence providing a non-destructive tool for process analysis and control.

Combination of grazing incidence x-ray fluorescence with x-ray reflectivity in one table-top spectrometer for improved characterization of thin layer and implants on/in silicon wafers.

As Grazing Incidence X-ray Fluorescence (GIXRF) analysis does not provide unambiguous results for the characterization of nanometre layers as well as nanometre depth profiles of implants in silicon wafers by its own, the approach of providing additional information using the signal from X-ray Reflectivity (XRR) was tested. As GIXRF already uses an X-ray beam impinging under grazing incidence and the variation of the angle of incidence, a GIXRF spectrometer was adapted with an XRR unit to obtain data from the angle dependent fluorescence radiation as well as data from the reflected beam. A θ-2θ goniometer was simulated by combining a translation and tilt movement of a Silicon Drift detector, which allows detecting the reflected beam over 5 orders of magnitude.

Comparison of two confocal micro-XRF spectrometers with different design aspects.

Two different confocal micro X-ray fluorescence spectrometers have been developed and installed at Osaka City University and the Vienna University of Technology Atominstitut. The Osaka City University system is a high resolution spectrometer operating in air. The Vienna University of Technology Atominstitut spectrometer has a lower spatial resolution but is optimized for light element detection and operates under vacuum condition.

Spatial distribution of the trace elements zinc, strontium and lead in human bone tissue.

Trace elements are chemical elements in minute quantities, which are known to accumulate in the bone. Cortical and trabecular bones consist of bone structural units (BSUs) such as osteons and bone packets of different mineral content and are separated by cement lines. Previous studies investigating trace elements in bone lacked resolution and therefore very little is known about the local concentration of zinc (Zn), strontium (Sr) and lead (Pb) in BSUs of human bone.

Differential accumulation of lead and zinc in double-tidemarks of articular cartilage.

Introduction: Long-term exposure to increased lead (Pb) concentrations is associated with several chronic diseases. The divalent cation zinc (Zn) is essential for numerous enzymes. In a recent study we found remarkably elevated concentrations of Pb and Zn in the tidemark (TM), which is the mineralization front of human articular cartilage.

Confocal micro-x-ray fluorescence spectrometer for light element analysis.

An existing micro-x-ray fluorescence (micro-XRF) spectrometer designed for light element analysis (6 ≤ Z ≤ 14) has been extended to confocal geometry: a second polycapillary x-ray optic has been introduced in front of the energy dispersive x-ray detector. New piezo positioners for optimum alignment of both optics have been installed inside the vacuum chamber. The spectrometer offers now the possibility of true 3D elemental analysis in the micrometer regime.

Increased strontium uptake in trabecular bone of ovariectomized calcium-deficient rats treated with strontium ranelate or strontium chloride.

Based on clinical trials showing the efficacy to reduce vertebral and non-vertebral fractures, strontium ranelate (SrR) has been approved in several countries for the treatment of postmenopausal osteoporosis. Hence, it is of special clinical interest to elucidate how the Sr uptake is influenced by dietary Ca deficiency as well as by the formula of Sr administration, SrR versus strontium chloride (SrCl(2)). Three-month-old ovariectomized rats were treated for 90 days with doses of 25 mg kg(-1) d(-1) and 150 mg kg(-1) d(-1) of SrR or SrCl(2) at low (0.

Assessment of chemical species of lead accumulated in tidemarks of human articular cartilage by X-ray absorption near-edge structure analysis.

A highly specific accumulation of the toxic element lead was recently measured in the transition zone between non-calcified and calcified normal human articular cartilage. This transition zone, the so-called `tidemark', is considered to be an active calcification front of great clinical importance. However, little is known about the mechanisms of accumulation and the chemical form of Pb in calcified cartilage and bone.

Improved micro x-ray fluorescence spectrometer for light element analysis.

Since most available micro x-ray fluorescence (micro-XRF) spectrometers operate in air, which does not allow the analysis of low-Z elements (Z or = 6). It offers improved excitation and detection conditions necessary for light element analysis. To eliminate absorption of the exciting and fluorescent radiation, the system operates under vacuum condition.

Lead accumulation in tidemark of articular cartilage.

Objective: Determination of the spatial distribution of the toxic element lead (Pb) and other trace elements in normal articular cartilage and subchondral bone from adult humans with no history of work-related exposure to Pb.

Methods: Four macroscopically normal femoral heads and three patellas were harvested from randomly selected forensic autopsies. All subjects died of acute illnesses, had no history of work-related exposure to Pb and had no metabolic bone disease.

Direct analysis of Al2O3 powders by total reflection X-ray fluorescence spectrometry.

A direct analysis procedure for the determination of trace impurities of Ca, V, Cr, Mn, Fe, Ni, Cu, Zn and Ga in Al2O3 ceramic powders by total reflection X-ray fluorescence spectrometry (TXRF) is described. The powders were analysed in the form of slurries containing 1-10 mg mL(-1) of powder. The use of the procedure in the case of powders with differing grain size and for different slurry concentrations was investigated.

Laser technology: source of coherent kiloelectronvolt X-rays.

Generating X-rays that have the properties of laser light has been a long-standing goal for experimental science. Here we describe the emission of highly collimated, spatially coherent X-rays, at a wavelength of about 1 nanometre and at photon energies extending to 1.3 kiloelectronvolts, from atoms that have been ionized by a 5-femtosecond laser pulse.