The Addition of Hydroxyapatite Nanoparticles on Implant Surfaces Modified by Zirconia Blasting and Acid Etching to Enhance Peri-Implant Bone Healing.

This study investigated the impact of adding hydroxyapatite nanoparticles to implant surfaces treated with zirconia blasting and acid etching (ZiHa), focusing on structural changes and bone healing parameters in low-density bone sites. The topographical characterization of titanium discs with a ZiHa surface and a commercially modified zirconia-blasted and acid-etched surface (Zi) was performed using scanning electron microscopy, profilometry, and surface-free energy. For the in vivo assessment, 22 female rats were ovariectomized and kept for 90 days, after which one implant from each group was randomly placed in each tibial metaphysis of the animals.

Assessment of the gut microbiota of children with obstructive sleep apnea syndrome: A systematic review.

Sleep-disordered breathing promotes not only unfavorable craniofacial changes in untreated pediatric patients but also neurocognitive, metabolic, cardiovascular, and even long-term social alterations. This systematic review evaluated whether children diagnosed with obstructive sleep apnea syndrome (OSAS) have different intestinal microbiota constitutions from healthy children and was based on the PRISMA guidelines (PROSPERO: CRD42022360074). A total of 1562 clinical studies published between 2019 and 2023 were selected from the PubMed/MEDLINE, Embase, Web of Science, Scopus, and Cochrane Library databases, of which five were included in the qualitative analysis, three being randomized and two prospective.

Influence of ceramic crown design (translucent monolithic zirconia vs. bilayered) of implant-supported single crowns after mechanical cycling.

Objectives: This study aimed to assess the influence of translucent monolithic versus bilayered crowns and whether the use of a CoCr base abutments affects the fatigue and fracture resistance of screwed implant-supported single crowns with external connections under mechanical cycling.

Materials And Methods: Fifty specimens were divided into groups: (1) metal-ceramic (MC) crown, (2) veneered zirconia crown (Zr), (3) veneered zirconia crown with a CoCr base abutment (ZrB), (4) monolithic translucent zirconia crown (MZr), and (5) monolithic translucent zirconia crown with a CoCr base abutment (MZrB). Specimens underwent mechanical cycling (5 × 10 cycles; 150 N) evaluating fatigue resistance (number of failures) and those that failed were subsequently subjected to fractographic analyses (stereomicroscope and scanning electron microscope) to evaluate failure location and area, and maximum fracture load was also measured.

Effect of Biofilm on Corrosion Kinetics in Titanium Grade 4 Alloys with Different Surface Treatments.

has been associated with bacteremia, sepsis, and bacterial endocarditis and peri-implantitis. This microorganism can remain in the alveolus even after extraction of the root remnant. This study aimed to evaluate the corrosion on different surfaces of commercially pure titanium (Ti) grade 4 (Ticp-G4) as a function of the bacterial biofilm effect of .

Surface characterization of indirect restorative materials submitted to different etching protocols.

Objectives: This in vitro study aimed to evaluate the effect of different times and concentrations of hydrofluoric acid etching on the surface of indirect restorative materials obtained from blocks used in CAD-CAM technology.

Methods: Specimens (4 mm × 4 mm × 0.8 mm) were obtained for each indirect restorative material: zirconia-reinforced lithium monosilicate ceramic (Celtra Duo), nanoceramic resin (Lava Ultimate), and polymer-infiltrated ceramic network material (Vita Enamic).

Analysis of Torque Maintenance and Fracture Resistance after Fatigue in Retention Screws Made of Different Metals for Screw-Retained Implant-Borne Prosthesis Joints.

Purpose: The aim was to evaluate the effect of different metallic alloys used in the manufacture of retention screws for universal cast to long abutment (UCLA) abutments for external hexagon (HE) and Morse taper (MT) connection implants, as well as of mechanical cycling on torque maintenance and fracture resistance through electromechanical fatigue testing by mastication followed by compression testing.

Methods: Sixty implants were used, 30 MT and 30 HE, with their respective titanium UCLA abutments and retention screws of 5 different materials ( = 6): Ti cp grade 2, Ti cp grade 4, Ti cp grade 4 hard, Ti grade 5-Ti6Al4V and surgical steel (DSP® Biomedical). The assemblies were positioned in an electromechanical masticatory fatigue testing machine.

Oral health-related quality of life and satisfaction in edentulous patients rehabilitated with implant-supported full dentures all-on-four concept: a systematic review.

Objective: Address oral health-related quality of life (OHRQoL) and patient satisfaction rehabilitated by the all-on-four concept as the primary outcome.

Material And Methods: A search was performed in the PubMed/MEDLINE, Web of Science, and Cochrane databases according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis criteria (PRISMA). The PICO question was used to address the following specific question: "What is the level of oral health-related quality of life and satisfaction in edentulous patients and with atrophic jaws who received dental implants for full-arch implant-supported restorations following the all-on-four in the mandible or maxilla?"

Results: Eleven studies including 693 patients aged 55 to 71 years were selected.

Titanium Allergy Caused by Dental Implants: A Systematic Literature Review and Case Report.

(1) Background: Hypersensitivity reactions to metals may arise in predisposed patients chronically exposed to metallic materials, including dental implants made of titanium alloys. The purpose of this article was to systematically review titanium allergy manifestations in patients treated with dental implants and report a clinical case; (2) Methods: A systematic electronic search was performed for articles published in the English language until July 2021. The following eligibility criteria were adopted: (1) Population: individuals undergoing titanium and/or titanium alloy implant-supported rehabilitations; (2) Exposure: peri-implant soft tissue reactions attributable to implant insertion; (3) Outcome: evidence of titanium allergy, diagnostic methods, and forms of resolution; (3) Results: The included studies, in summary, presented evidence that titanium should not be considered an inert material, being able to trigger allergic reactions, and may be responsible for implant failure.

Performance of different abutment/implant joints as a result of a sealing agent.

Purpose This in vitro study aimed to evaluate the effectiveness of a sealing agent in sealing the abutment/implant interface and the preload maintenance of retaining screws after mechanical cycling.Methods Six groups (n = 12) were evaluated according to the abutment/implant system (external-hexagon implant and UCLA abutments, EHU; Morse taper implant and UCLA abutments, MTU; and Morse taper implant and flexcone abutments, MTF) and the presence of an anaerobic gel sealing agent (control group, no sealing agent; experimental group, sealing agent). Toluidine blue (0.

Clinical outcomes of minimally invasive ceramic restorations executed by dentists with different levels of experience. Blind and prospective clinical study.

Purpose: To evaluate the clinical outcomes of minimally invasive ceramic restorations executed by dentists with different levels of experience.

Methods: Sixteen professionals were divided into 4 groups according to their experience levels. These included G1: up to 2 years since graduation, G2: 2-5 years, G3: 5-10 years, and G4: more than 10 years.

Effectiveness of Sealing Gel on Vertical Misfit at the Implant-Abutment Interface and Preload Maintenance of Screw-Retained Implant-Supported Prostheses.

Purpose: This in vitro study evaluated the effectiveness of a sealing agent on vertical misfit of the implant-abutment interface in an external hexagon implant system before and after mechanical cyclic loading. Effects on preload maintenance of retaining screws after mechanical cycling were also assessed.

Materials And Methods: External hexagon implant systems were divided into two groups (n = 12) according to the presence of an anaerobic sealing gel (control group-no sealing gel; experimental group-sealing gel applied).

Correction: Sealing agent reduces formation of single and dual-species biofilms of Candida albicans and Enterococcus faecalis on screw joints at the abutment/implant interface.

[This corrects the article DOI: 10.1371/journal.pone.

Degree of conversion of resin cements polymerized under different ceramic systems.

The aim of this study was to evaluate the degree of conversion of resin cements polymerized under different ceramic systems. Forty specimens of RelyX ARC (3M ESPE) and Maxcem Elite (Kerr) resin cements were polymerized under 5 types of dental ceramics: feldspathic, aluminum oxide-reinforced, aluminum oxide-based strengthened with zirconium oxide, leucite-reinforced, and lithium disilicate-reinforced. Measurements of the degree of conversion of the resin cements were performed 10 minutes, 1 hour, and 24 hours after curing using a Fourier transform infrared spectrophotometer.

Materials Sealing Preventing Biofilm Formation in Implant/Abutment Joints: Which Is the Most Effective? A Systematic Review and Meta-Analysis.

The purpose of this systematic review was to evaluate the literature available for materials exhibiting the best efficacy in preventing biofilm formation in the interior of implants. We searched PubMed/MEDLINE, Scopus, and Cochrane databases. This review is registered with the PROSPERO database and followed the suitability of the PRISMA protocol.

Effect of glass fiber post customization on the mechanical properties of resin cement and underlying dentin.

This study evaluated the Martens hardness (HM) and elastic modulus (E) of resin cement and dentin underlying the bonding interface of customized glass fiber posts luted to intraradicular dentin and subjected to mechanical cycling. Two null hypotheses were tested: (1) no differences in the mechanical properties (HM and E) of the resin cement and underlying dentin would be found between customized and noncustomized glass fiber post groups, with or without mechanical cycling; and (2) no differences in the mechanical properties of the resin cement or underlying dentin would be found between the cervical, middle, and apical thirds of the intraradicular dentin. Forty single-rooted premolars were divided into 4 groups: customized or noncustomized glass fiber post, with or without mechanical cycling.

Influence of Light-Curing Intensity on Color Stability and Microhardness of Composite Resins.

The purpose of this study was to evaluate the intensity of light-curing units and its relationship with the color stability and microhardness of composite resins with different shades subjected to a thermocycling procedure. Eighty blocks (5.0 × 2.

Sealing agent reduces formation of single and dual-species biofilms of Candida albicans and Enterococcus faecalis on screw joints at the abutment/implant interface.

The aim of this research was to evaluate the efficacy of a commercial sealing agent at the abutment/implant interface against microleakage of single and dual-species biofilms of Candida albicans and Enterococcus faecalis into external hexagon (EH) and Morse taper (MT) prosthetic connections. A total of 216 samples of implants and their abutments were tested. Six groups (n = 36) were evaluated based on biofilm and period of incubation (7 and 14 days).

Influence of the depth of intraradicular dentin on the pushout bond strength of resin materials.

Aim: The aim of the present study was to evaluate the pushout bond strength between glass-fiber posts to different regions of intraradicular dentin with different materials for adhesive cementation.

Methods: After endodontic filling, 40 teeth were divided into five groups according to adhesive cementation: Adper Single Bond 2 + RelyX ARC, Excite DSC + RelyX ARC (EXC), Adper SE Plus + RelyX ARC (SEP), RelyX Unicem, and Set. After the bonding process, roots were sectioned obtaining slices to be analyzed from each third.

Influence of silver nanoparticle solution on the mechanical properties of resin cements and intrarradicular dentin.

This study evaluated the influence of silver nanoparticle on mechanical properties of the components of underlying dentin and resin cement in different regions of intraradicular dentin. Ninety extracted single-rooted human teeth were used in this study. After endodontic preparation, the teeth were divided into five groups, according to the irrigating agents: distilled water, 5.

Emergence profile customization technique during implant transfer.

This case report aimed to describe the clinical considerations in oral rehabilitation with prostheses on implants in the anterior region, using emergence profile customization technique during implant transfer. A patient presented with a missing left upper central incisor and with not satisfactory esthetic in the other upper incisors. After diagnosis, a treatment plan was elaborated: implant placement in this region; ceramic laminates for teeth 11 and 22, and full crown for tooth 12.

Do Irrigation Solutions Influence the Bond Interface Between Glass Fiber Posts and Dentin?

The aim of this study was to evaluate the push-out bond strength and interface permeability of glass-fiber posts in different regions of post space (cervical, middle, and apical) submitted to different irrigation solutions. Ninety single-rooted human teeth were submitted to endodontic treatment and divided into five groups, according to irrigation solutions: distilled water, 5.25% NaOCl, 25% polyacrylic acid, 2% chlorhexidine, and 23 ppm Ag NP dispersion.

Minimum intervention management of diastema closure using cordless displacement system and laminate veneers: A 2-year follow-up.

This case report presents a minimally invasive diastema treatment using cordless gingival displacement system allowing a very conservative intervention. A 32-year-old female patient who presented with diastema in her upper front teeth opted for a treatment using laminate veneers to ensure achieving adequate tooth proportion and gingival levels. Having a displacement material that exerts excessive pressure during the displacement process can lead to disruption of the junctional epithelium and damage to periodontal tissues.

Efficacy of Sealing Agents on Preload Maintenance of Screw-Retained Implant-Supported Prostheses.

Purpose: The aim of this study was to evaluate the effect of sealing agents on preload maintenance of screw joints.

Materials And Methods: A total of four groups (n = 10 in each group) of abutment/implant systems, including external hexagon implants and antirotational UCLA abutments with a metallic collar in cobalt-chromium alloy, were assessed. In the control group (CG), no sealing agent was used at the abutment screw/implant interface.

Sealing the Screw Access Channel with Polytetrafluoroethylene Tape: Advantages of the Technique.

The aim of this article is to describe the procedure for sealing the screw access channel using plastic tape, polytetrafluoroethylene, in screw- or cement-retained implant-supported prostheses. This technique is viable and easily performed, and the functional and esthetic results are satisfactory.

Epidemiological Data and Survival Rate of Removable Partial Dentures.

Introduction: The use of removable partial denture (RPD) is considered as low-cost and common treatment option to rehabilitate edentulous areas.

Aim: This study aimed to investigate the epidemiological data of patients rehabilitated with removable partial denture (RPD) in order to assess treatment survival rate and failures.

Materials And Methods: Epidemiological data and medical records of patients treated with RPD between 2007 and 2012 at the RPD discipline of a Brazilian University (Aracatuba Dental School- UNESP) were evaluated as well as dental records of patients who underwent RPD treatments (fabrication or repairs) between 2000 and 2010.