LMA fibers with increased higher-order mode loss for high average power, pulsed, diffraction-limited lasers.

We demonstrate new, large-mode area (LMA) gain fibers with ∼25 µm mode-field diameter, and increased higher-order mode loss that enable diffraction limited, pulsed fiber lasers operating at high average power with high pulse energy. We achieved 1.6 mJ, ns pulses, with 1.

Tunable SNAP microresonators via internal ohmic heating.

We demonstrate a thermally tunable surface nanoscale axial photonics (SNAP) platform. Stable tuning is achieved by heating a SNAP structure fabricated on the surface of a silica capillary with a metal wire positioned inside. Heating a SNAP microresonator with a uniform wire introduces uniform variation of its effective radius which results in constant shift of its resonance wavelengths.

Axicons for mode conversion in high peak power, higher-order mode, fiber amplifiers.

Higher-order mode fiber amplifiers have demonstrated effective areas as large as 6000 μm2, allowing for high pulse energy and peak power amplification. Long-period gratings are used to convert the fundamental mode to the higher-order mode at the entrance to the amplifier, and reconvert back to the fundamental at the exit, to achieve a diffraction limited beam. However, long period gratings are susceptible to nonlinearity at high peak power.

Polarization maintaining single-mode low-loss hollow-core fibres.

Hollow-core fibre (HCF) is a powerful technology platform offering breakthrough performance improvements in sensing, communications, higher-power pulse delivery and other applications. Free from the usual constraints on what materials can guide light, it promises qualitatively new and ideal operating regimes: precision signals transmitted free of nonlinearities, sensors that guide light directly in the samples they are meant to probe and so on. However, these fibres have not been widely adopted, largely because uncontrolled coupling between transverse and polarization modes overshadows their benefits.

Higher-order mode fiber enables high energy chirped-pulse amplification.

Energy scaling of femtosecond fiber lasers has been constrained by nonlinear impairments and optical fiber damage. Reducing the optical irradiance inside the fiber by increasing mode size lowers these effects. Using an erbium-doped higher-order mode fiber with 6000 µm(2) effective area and output fundamental mode re-conversion, we show a breakthrough in pulse energy from a monolithic fiber chirped pulse amplification system using higher-order mode propagation generating 300 µJ pulses with duration <500 fs (FWHM) and peak power >600 MW at 1.

Measuring higher-order modes in a low-loss, hollow-core, photonic-bandgap fiber.

We perform detailed measurements of the higher-order-mode content of a low-loss, hollow-core, photonic-bandgap fiber. Mode content is characterized using Spatially and Spectrally resolved (S2) imaging, revealing a variety of phenomena. Discrete mode scattering to core-guided modes are measured at small relative group-delays.

Super free spectral range tunable optical microbubble resonator.

An optical resonator is often called fully tunable if its tunable range exceeds the spectral interval that contains the resonances at all the characteristic modes of this resonator. For high-Q-factor spheroidal and toroidal microresonators, this interval coincides with the azimuthal free spectral range (FSR). In this Letter, we demonstrate what we believe to be the first mechanically fully tunable spheroidal microresonator created of a silica microbubble having a 100microm order radius and 1microm order wall thickness.

Optical microbubble resonator.

We develop a method for fabricating very small silica microbubbles having a micrometer-order wall thickness and demonstrate the first optical microbubble resonator. Our method is based on blowing a microbubble using stable radiative CO(2) laser heating rather than unstable convective heating in a flame or furnace. Microbubbles are created along a microcapillary and are naturally opened to the input and output microfluidic or gas channels.

High-power 100-fs pulse generation by frequency doubling of an erbium ytterbium-fiber master oscillator power amplifier.

Frequency doubling of an erbium-ytterbium-fiber master-oscillator-power-amplifier system is demonstrated. Simultaneous amplification and pulse compression in multimode erbium-ytterbium-doped fibers produces high-quality near-diffraction and near-bandwidth-limited 100-fs pulses at a wavelength of 1.62microm with an average power of 230 mW at a repetition rate of 52 MHz.

Grating resonances in air-silica microstructured optical fibers.

We report what is believed to be the first demonstration of optical fiber gratings written in photonic crystal fibers. The fiber consists of a germanium-doped photosensitive core surrounded by a hexagonal periodic air-hole lattice in a silica matrix. The spectra of these gratings allow for a detailed characterization of the fiber.

Optical properties of high-delta air silica microstructure optical fibers.

We analyze the waveguide properties of microstructure optical fibers consisting of a silica core surrounded by a single ring of large air holes. Although the fibers can support numerous transverse spatial modes, coupling between these modes even in the presence of large perturbations is prevented for small core dimensions, owing to a large wave-vector mismatch between the lowest-order modes. The result is an optical fiber that can appear single mode with propagation properties that can be achieved only in multimode waveguides.

Visible continuum generation in air-silica microstructure optical fibers with anomalous dispersion at 800 nm.

We demonstrate experimentally for what is to our knowledge the first time that air-silica microstructure optical fibers can exhibit anomalous dispersion at visible wavelengths. We exploit this feature to generate an optical continuum 550 THz in width, extending from the violet to the infrared, by propagating pulses of 100-fs duration and kilowatt peak powers through a microstructure fiber near the zero-dispersion wavelength.

Four-wave mixing in microstructure fiber.

We report what we believe to be the first experimental demonstration of nondegenerate four-wave mixing in a microstructure fiber. The effect of the chi((3)) nonlinearity is enhanced in such a fiber because of the small core area, and we achieve phase matching by operating near the zero-dispersion wavelength (?750 nm) . We have observed parametric gains of more than 13 dB in 6.

Ultrahigh-resolution optical coherence tomography using continuum generation in an air-silica microstructure optical fiber.

We demonstrate ultrahigh-resolution optical coherence tomography (OCT) using continuum generation in an air-silica microstructure fiber as a low-coherence light source. A broadband OCT system was developed and imaging was performed with a bandwidth of 370 nm at a 1.3-mu;m center wavelength.

Soliton self-frequency shift in a short tapered air-silica microstructure fiber.

We report a soliton self-frequency shift of more than 20% of the optical frequency in a tapered air-silica microstructure fiber that exhibits a widely flattened large anomalous dispersion in the near infrared. Remarkably, the large frequency shift was realized in a fiber of length as short as 15 cm, 2 orders of magnitude shorter than those reported previously with similar input pulse duration and pulse energies, owing to the small mode size and the large and uniform dispersion in the tapered fiber. By varying the power of the input pulses, we generated compressed sub-100-fs soliton pulses of ~1-nJ pulse energy tunable from 1.

Optical parametric oscillator based on four-wave mixing in microstructure fiber.

We demonstrate, for the first time to our knowledge, optical parametric oscillation based on four-wave mixing in microstructure fiber. The measured wavelength-tunability range of the device (40 nm) and the threshold-pump peak power (34.4 W) are in good agreement with the theory of four-wave mixing in optical fibers.

Long-term carrier-envelope phase coherence.

The carrier-envelope phase of the pulse train emitted by a 10-fs mode-locked laser has been stabilized such that carrier-envelope phase coherence is maintained for at least 150 s (measurement limited). The phase coherence time was measured independently of the feedback loop.

Frequency-resolved optical gating and single-shot spectral measurements reveal fine structure in microstructure-fiber continuum.

Cross-correlation frequency-resolved optical gating with an angle-dithered nonlinear-optical crystal permits measurement of the intensity and the phase of the ultrabroadband (as much as 1200 nm wide) continuum generated from microstructure optical fiber. Retrieval revealed fine-scale structure in the continuum spectrum. Simulations and single-shot spectrum measurements confirmed that the fine structure does exist on a single-shot basis but washes out when many shots are averaged.

Observation of quantum-limited timing jitter in an active, harmonically mode-locked fiber laser.

We report on the observation of quantum-limited timing jitter in a harmonically mode-locked soliton fiber laser with an ultralow-noise local oscillator. The effects of amplitude and phase modulation on the spectrum are described and compared with theory.

Highly tunable birefringent microstructured optical fiber.

We demonstrate a method for introducing and dynamically tuning birefringence in a microstructured optical fiber. Waveguide asymmetry in the fiber is obtained by selective filling of air holes with polymer, and tunability is achieved by temperature tuning of the polymer's index. The fiber is tapered such that the mode field expands into the cladding and efficiently overlaps the polymer that has been infused into the air holes, ensuring enhanced tunability and low splice loss.

Polarization mode dispersion and vectorial modulational instability in air-silica microstructure fiber.

The birefringence of an air-silica microstructure fiber has been studied by measurement of the fiber polarization mode dispersion (PMD) over the wavelength range 545-640 nm. The experimental results are shown to be in good agreement with vectorial numerical calculations, assuming an elliptical core with an eccentricity of 7%. We also report controlled experiments studying nonlinear vectorial modulation instability in the fiber, yielding 3.

Soliton squeezing in microstructure fiber.

We demonstrate, for the first time to our knowledge, the generation of squeezed light by means of soliton self-phase modulation in microstructure fiber. We observe and characterize the formation of solitons in the microstructure fiber at 1550 nm. A maximum squeezing of 2.

Ultraviolet photosensitive response in an antimony-doped optical fiber.

A silica optical fiber doped with Sb is fabricated with a refractive-index profile that is comparable with standard single-mode fiber. In D(2)-loaded samples, we observe UV photosensitivity with an initial refractive-index-modulation growth rate six times higher than that of the equivalent Ge-doped standard fibers. Enhanced temperature stability of the Bragg grating strength up to 200 degrees C is also observed.

Nonlinear phase noise generated in air-silica microstructure fiber and its effect on carrier-envelope phase.

We present measurements of the nonlinear phase noise that is due to amplitude-to-phase conversion in air-silica microstructure fiber that is utilized to broaden the frequency comb from a mode-locked femtosecond laser to an optical octave. When the octave of the continuum is employed to phase stabilize the laser-pulse train, this phase noise causes a change in the carrier-envelope phase of 3784-rad/nJ change in pulse energy. As a result, the jitter on the carrier-envelope phase that is due to fiber noise, from 0.