Quantitative and correlative extreme ultraviolet coherent imaging of mouse hippocampal neurons at high resolution.

Microscopy with extreme ultraviolet (EUV) light can provide many advantages over optical, hard x-ray or electron-based techniques. However, traditional EUV sources and optics have large disadvantages of scale and cost. Here, we demonstrate the use of a laboratory-scale, coherent EUV source to image biological samples-mouse hippocampal neurons-providing quantitative phase and amplitude transmission information with a lateral resolution of 80 nm and an axial sensitivity of ~1 nm.

Efficient high-harmonic generation from a stable and compact ultrafast Yb-fiber laser producing 100 μJ, 350 fs pulses based on bendable photonic crystal fiber.

The development of an Yb-fiber-based chirped-pulse amplification system and the performance in the generation of extreme ultraviolet (EUV) radiation by high-harmonic generation is reported. The fiber laser produced 100 μJ, 350 fs output pulses with diffraction-limited beam quality at a repetition rate of 16.7 kHz.

Wide-field broadband extreme ultraviolet transmission ptychography using a high-harmonic source: publisher's note.

This note amends the list of funders in a recent Letter [Opt. Lett.41, 1317 (2016)OPLEDP0146-959210.

Wide-field broadband extreme ultraviolet transmission ptychography using a high-harmonic source.

High-harmonic generation (HHG) provides a laboratory-scale source of coherent radiation ideally suited to lensless coherent diffractive imaging (CDI) in the EUV and x-ray spectral region. Here we demonstrate transmission extreme ultraviolet (EUV) ptychography, a scanning variant of CDI, using radiation at a wavelength around 29 nm from an HHG source. Image resolution is diffraction-limited at 54 nm and fields of view up to ∼100  μm are demonstrated.

Design and fabrication of a 3D-structured gold film with nanopores for local electric field enhancement in the pore.

Three-dimensionally structured gold membrane films with nanopores of defined, periodic geometries are designed and fabricated to provide the spatially localised enhancement of electric fields by manipulation of the plasmons inside nanopores. Square nanopores of different size and orientation relative to the pyramid are considered for films in aqueous and air environments, which allow for control of the position of electric fields within the structure. Designs suitable for use with 780 nm light were created.

Experiences with a researcher-centric ELN.

Electronic Laboratory Notebooks (ELNs) are progressively replacing traditional paper books in both commercial research establishments and academic institutions. University researchers require specific features from ELNs, given the need to promote cross-institutional collaborative working, to enable the sharing of procedures and results, and to facilitate publication. The LabTrove ELN, which we use as our exemplar, was designed to be researcher-centric (, not only aimed at the individual researcher's basic needs rather than to a specific institutional or subject or disciplinary agenda, but also able to be tailored because it is open source).

Fractional Talbot lithography with extreme ultraviolet light.

Fractional Talbot effect leads to the possibility to implement patterning of structures with smaller periods than the master mask. This is particularly attractive when using short wavelength illumination in the extreme ultraviolet because of attainable resolution in the sub-100-nm range. In this Letter, we demonstrate the Talbot lithography with the fractional Talbot effect under coherent illumination generated with a capillary discharge Ne-like Ar extreme ultraviolet laser.

Gas jet structure influence on high harmonic generation.

Gas jets used as sources for high harmonic generation (HHG) have a complex three-dimensional density and velocity profile. This paper describes how the profile influences the generation of extreme-UV light. As the position of the laser focus is varied along the jet flow axis, we show that the intensity of the output radiation varies by approximately three times, with the highest flux being observed when the laser is focused into the Mach disc.

Modal effects on pump-pulse propagation in an Ar-filled capillary.

Accurate three-dimensional modelling of nonlinear pulse propagation within a gas-filled capillary is essential for understanding and improving the XUV yield in high harmonic generation. We introduce both a new model based on a multimode generalized nonlinear Schrödinger equation and a novel spatio-spectral measurement technique to which the model can be compared. The theory shows excellent agreement with the measured output spectrum and the spatio-spectral measurement reveals that the model correctly predicts higher order mode contributions to spectral broadening of the pulse.

Observation of the developing optical continuum along a nonlinear waveguide.

We describe what is to our knowledge the first nondestructive measurement of the evolution of an optical continuum as a function of distance along a nonlinear waveguide. Spectral mapping is achieved on a subwavelength scale by utilizing near-field microscopy to probe the waveguide's evanescent field. The measured continuum broadening along the waveguide agrees in general form with predictions of broadening from theoretical calculations, but differs in some important details.

Soft-x-ray wavelength shift induced by ionization effects in a capillary.

Coherent soft x rays are produced by high-harmonic generation in a capillary filled with Ar gas. We demonstrate that the tuning of the harmonic wavelengths with intensity and chirp arises from changes in the Ar ionization level. Control over the tuning can be achieved either by changing the average intensity of the laser pulse or by varying the quadratic spectral phase of the laser pulse.

Resin bead micro-UV-visible absorption spectroscopy.

The construction and design of a microscope coupled with a miniature UV-vis spectrometer is described. This was applied to the study of dyes linked to solid supports and displayed good correlation in spectral shape and lambda(max) values when compared to the dyes in solution, as well as showing a linear relationship between dye loading and UV-vis absorbance. The spectral profiles of these dyes at various pH's were measured and used to determine the pK(a) of the dyes on the beads, which were compared with the pK(a) values of the dyes in solution, thus enabling the dye-loaded beads to act as pH sensors.

Which sites react first? Functional site distribution and kinetics on solid supports investigated using confocal Raman and fluorescence microscopy.

Fluorescence microscopy is a powerful technique for analyzing beads with very low loadings of fluorophores; however, the method is flawed when looking at more highly loaded beads as a result of severe problems with absorption. To probe distributions at higher loading levels, Raman spectroscopy avoids many of these issues. These studies show that there is a uniform distribution of reactive sites throughout the beads but that the spatial distribution of reacted sites depends on the polymer type, with a fine balance between reaction and diffusion rate.