Hydrogen Adsorption on Ordered and Disordered Pt-Fe and Pt-Co Alloys.

The bulk properties and surface chemical reactivity of compositionally disordered Pt-Fe and Pt-Co alloys in the A1 phase have been investigated theoretically in comparison to the ordered alloys of the same compositions. The results are analyzed together with our previously reported findings for Pt-Ni. Nonlinear variation is observed in lattice constant, d band center, magnetic moment, and hydrogen adsorption energy across the composition range (0-100 atomic % of Pt, ).

Trends in hot carrier distribution for disordered noble-transition metal alloys.

We developed and tested an approach for predicting trends for efficient hot carrier generation among disordered metal alloys. We provide a simple argument for the importance of indirect transitions in the presence of disorder, thus justifying the use of joint density of states ()-like quantities for exploring these trends. We introduce a new-like quantity,, which heuristically accounts for longer lifetimes of quasiparticles close to the Fermi energy.

Emergent properties from CuPd alloy films under near-infrared excitation.

Noble-transition metal alloys offer emergent optical and electronic properties for near-infrared (NIR) optoelectronic devices. We investigate the optical and electronic properties of CuPd alloy thin films and their ultrafast electron dynamics under NIR excitation. Ultraviolet photoelectron spectroscopy measurements supported by density functional theory calculations show strong d-band hybridization between the Cu 3d and Pd 4d bands.

CoCrFeNi High-Entropy Alloy as an Enhanced Hydrogen Evolution Catalyst in an Acidic Solution.

High-entropy alloys (HEAs) have intriguing material properties, but their potential as catalysts has not been widely explored. Based on a concise theoretical model, we predict that the surface of a quaternary HEA of base metals, CoCrFeNi, should go from being nearly fully oxidized except for pure Ni sites when exposed to O to being partially oxidized in an acidic solution under cathodic bias, and that such a partially oxidized surface should be more active for the electrochemical hydrogen evolution reaction (HER) in acidic solutions than all the component metals. These predictions are confirmed by electrochemical and surface science experiments: the Ni in the HEA is found to be most resistant to oxidation, and when deployed in 0.

Annihilation and Control of Chiral Domain Walls with Magnetic Fields.

The control of domain walls is central to nearly all magnetic technologies, particularly for information storage and spintronics. Creative attempts to increase storage density need to overcome volatility due to thermal fluctuations of nanoscopic domains and heating limitations. Topological defects, such as solitons, skyrmions, and merons, may be much less susceptible to fluctuations, owing to topological constraints, while also being controllable with low current densities.

Adsorption of Myoglobin and Corona Formation on Silica Nanoparticles.

The adsorption of proteins from aqueous medium leads to the formation of protein corona on nanoparticles. The formation of protein corona is governed by a complex interplay of protein-particle and protein-protein interactions, such as electrostatics, van der Waals, hydrophobic, hydrogen bonding, and solvation. The experimental parameters influencing these interactions, and thus governing the protein corona formation on nanoparticles, are currently poorly understood.

A Noble-Transition Alloy Excels at Hot-Carrier Generation in the Near Infrared.

Above-equilibrium "hot"-carrier generation in metals is a promising route to convert photons into electrical charge for efficient near-infrared optoelectronics. However, metals that offer both hot-carrier generation in the near-infrared and sufficient carrier lifetimes remain elusive. Alloys can offer emergent properties and new design strategies compared to pure metals.

Adsorption of Fatty Acid Molecules on Amine-Functionalized Silica Nanoparticles: Surface Organization and Foam Stability.

The crucial roles of the ionization state and counterion presence on the phase behavior of fatty acid in aqueous solutions are well-established. However, the effects of counterions on the adsorption and morphological state of fatty acid on nanoparticle surfaces are largely unknown. This knowledge gap exists due to the high complexity of the interactions between nanoparticles, counterions, and fatty acid molecules in aqueous solution.

Directed propulsion of spherical particles along three dimensional helical trajectories.

Active colloids are a class of microparticles that 'swim' through fluids by breaking the symmetry of the force distribution on their surfaces. Our ability to direct these particles along complex trajectories in three-dimensional (3D) space requires strategies to encode the desired forces and torques at the single particle level. Here, we show that spherical colloids with metal patches of low symmetry self-propel along non-linear 3D trajectories when powered remotely by an alternating current (AC) electric field.

pH-Induced reorientation of cytochrome c on silica nanoparticles.

The orientation of cytochrome c molecules at the surface of silica nanoparticles was studied in a wide pH range by combining small-angle neutron scattering, adsorption measurements, and molecular dynamics simulations. The results indicate a reorientation of the ellipsoidal protein from head-on to side-on as the pH is increased. This is attributed to changes in the surface charge distribution of both the protein and the nanoparticles.

Magnetic Field-Driven Convection for Directed Surface Patterning of Colloids.

Drying sessile droplets is a promising route to transform colloidal dispersions into surface coatings, which are widely used in material design and biochemical detection. However, directing the assembly of the particles within drying droplets and achieving surface patterns beyond the well-known coffee-ring formation remain a challenge. Here, we present a new principle of directing the assembly of nonmagnetic colloidal particles dispersed in a magnetic fluid and generating unusual surface patterns.

Benchmarking the Fundamental Electronic Properties of small TiO Nanoclusters by GW and Coupled Cluster Theory Calculations.

We study the vertical and adiabatic ionization potentials and electron affinities of bare and hydroxylated TiO nanoclusters, as well as their fundamental gap and exciton binding energy values, to understand how the clusters' electronic properties change as a function of size and hydroxylation. In addition, we have employed a range of many-body methods; including GW, qsGW, EA/IP-EOM-CCSD, and DFT (B3LYP, PBE), to compare the performance and predictions of the different classes of methods. We demonstrate that, for bare clusters, all many-body methods predict the same trend with cluster size.

Petascale Simulations of the Morphology and the Molecular Interface of Bulk Heterojunctions.

Understanding how additives interact and segregate within bulk heterojunction (BHJ) thin films is critical for exercising control over structure at multiple length scales and delivering improvements in photovoltaic performance. The morphological evolution of poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) blends that are commensurate with the size of a BHJ thin film is examined using petascale coarse-grained molecular dynamics simulations. Comparisons between two-component and three-component systems containing short P3HT chains as additives undergoing thermal annealing demonstrate that the short chains alter the morphology in apparently useful ways: they efficiently migrate to the P3HT/PCBM interface, increasing the P3HT domain size and interfacial area.

Coupled cluster Green function: Model involving single and double excitations.

In this paper, we report on the development of a parallel implementation of the coupled-cluster (CC) Green function formulation (GFCC) employing single and double excitations in the cluster operator (GFCCSD). A key aspect of this work is the determination of the frequency dependent self-energy, Σ(ω). The detailed description of the underlying algorithm is provided, including approximations used that preserve the pole structure of the full GFCCSD method, thereby reducing the computational costs while maintaining an accurate character of methodology.

Probing microhydration effect on the electronic structure of the GFP chromophore anion: Photoelectron spectroscopy and theoretical investigations.

The photophysics of the Green Fluorescent Protein (GFP) chromophore is critically dependent on its local structure and on its environment. Despite extensive experimental and computational studies, there remain many open questions regarding the key fundamental variables that govern this process. One outstanding problem is the role of autoionization as a possible relaxation pathway of the excited state under different environmental conditions.

Improved all-carbon spintronic device design.

The discovery of magnetism in carbon structures containing zigzag edges has stimulated new directions in the development and design of spintronic devices. However, many of the proposed structures are designed without incorporating a key phenomenon known as topological frustration, which leads to localized non-bonding states (free radicals), increasing chemical reactivity and instability. By applying graph theory, we demonstrate that topological frustrations can be avoided while simultaneously preserving spin ordering, thus providing alternative spintronic designs.

Equation of motion coupled cluster methods for electron attachment and ionization potential in fullerenes C60 and C70.

In both molecular and periodic solid-state systems there is a need for the accurate determination of the ionization potential and the electron affinity for systems ranging from light harvesting polymers and photocatalytic compounds to semiconductors. The development of a Green's function approach based on the coupled cluster (CC) formalism would be a valuable tool for addressing many properties involving many-body interactions along with their associated correlation functions. As a first step in this direction, we have developed an accurate and parallel efficient approach based on the equation of motion-CC technique.

Trends in the Catalytic Activity of Transition Metals for the Oxygen Reduction Reaction by Lithium.

Periodic density functional theory (DFT) calculations indicate that the intrinsic activity of Au, Ag, Pt, Pd, Ir, and Ru for the oxygen reduction reaction by Li (Li-ORR) forms a volcano-like trend with respect to the adsorption energy of oxygen, with Pt and Pd being the most active. The trend is based on two mechanisms: the reduction of molecular O2 on Au and Ag and of atomic O on the remaining metals. Step edges are found to be more active for catalyzing the Li-ORR than close-packed surfaces.

Mesoscopic metal-insulator transition at ferroelastic domain walls in VO2.

The novel phenomena induced by symmetry breaking at homointerfaces between ferroic variants in ferroelectric and ferroelastic materials have attracted recently much attention. Using variable temperature scanning microwave microscopy, we demonstrate the mesoscopic strain-induced metal-insulator phase transitions in the vicinity of ferroelastic domain walls in the semiconductive VO(2) that nucleated at temperatures as much as 10-12 degrees C below bulk transition, resulting in the formation of conductive channels in the material. Density functional theory is used to rationalize the process low activation energy.

O2 reduction by lithium on Au(111) and Pt(111).

Lithium-oxygen has one of the highest specific energies among known electrochemical couples and holds the promise of substantially boosting the specific energy of portable batteries. Mechanistic information of the oxygen reduction reaction by Li (Li-ORR) is scarce, and the factors limiting the discharge and charge efficiencies of the Li-oxygen cathode are not understood. To shed light on the fundamental surface chemistry of Li-ORR, we have performed periodic density functional theory calculations in conjunction with thermodynamic modeling for two metal surfaces, Au(111) and Pt(111).

A first-principles investigation of the effect of Pt cluster size on CO and NO oxidation intermediates and energetics.

As catalysis research strives toward designing structurally and functionally well-defined catalytic centers containing as few active metal atoms as possible, the importance of understanding the reactivity of small metal clusters, and in particular of systematic comparisons of reaction types and cluster sizes, has grown concomitantly. Here we report density functional theory calculations (GGA-PW91) that probe the relationship between particle size, intermediate structures, and energetics of CO and NO oxidation by molecular and atomic oxygen on Pt(x) clusters (x = 1-5 and 10). The preferred structures, charge distributions, vibrational spectra, and energetics are systematically examined for oxygen (O(2), 2O, and O), CO, CO(2), NO, and NO(2), for CO/NO co-adsorbed with O(2), 2O, and O, and for CO(2)/NO(2) co-adsorbed with O.

Thermodynamic equilibrium compositions, structures, and reaction energies of Pt(x)O(y) (x = 1-3) clusters predicted from first principles.

As synthetic nanocatalysis strives to create and apply well-defined catalytic centers containing as few as a handful of active metal atoms, it becomes particularly important to understand the structures, compositions, and reactivity of small metal clusters as a function of size and chemical environment. As a part of our effort to better understand the oxidation chemistry of Pt clusters, we present here a comprehensive set of density functional theory simulations combined with thermodynamic modeling that allow us to map out the T-p(O)2 phase diagrams and predict the oxygen affinity of Pt(x)O(y) clusters, x = 1-3. We find that the Pt clusters have a much stronger tendency to form oxides than does the bulk metal, that these oxides persist over a wide range of oxygen chemical potentials, and that the most stable cluster stoichiometry varies with size and may differ from the stoichiometry of the stable bulk oxide in the same environment.

Computational study of the structure, dynamics, and photophysical properties of conjugated polymers and oligomers under nanoscale confinement.

Computational simulations were used to investigate the dynamics and resulting structures of several para-phenylenevinylene (PPV) based polymers and oligomers (PPV, 2-methoxy-5-(2'-ethyl-hexyloxy)-p-phenylenevinylene --> MEH-PPV and 2,5,2',5'-tetrahexyloxy-7,8'-dicyano-p-phenylenevinylene --> CN-PPV). The results show how the morphology and structure are controlled to a large extent by the nature of the solute-solvent interactions in the initial solution-phase preparation. Secondary structural organization is induced by using the solution-phase structures to generate solvent-free single molecule nanoparticles.

Effect of particle size on the oxidizability of platinum clusters.

The catalytic properties of transition metal particles often depend crucially on their chemical environment, but so far, little is known about how the effects of the environment vary with particle size, especially for clusters consisting of only a few atoms. To gain insight into this topic, we have studied the oxygen affinity of free Pt(x) clusters as a function of cluster size (x = 1, 2, 3, 4, 5, and 10) using density functional theory (DFT) calculations (GGA-PW91). DFT-based Nosé-Hoover molecular dynamics has been used to explore the configuration space of the Pt(x)O(x) and Pt(x)O(2x) clusters, leading to the discovery of several novel Pt-oxide structures.

Observation of rare-earth segregation in silicon nitride ceramics at subnanometre dimensions.

Silicon nitride (Si3N4) ceramics are used in numerous applications because of their superior mechanical properties. Their intrinsically brittle nature is a critical issue, but can be overcome by introducing whisker-like microstructural features. However, the formation of such anisotropic grains is very sensitive to the type of cations used as the sintering additives.