New epiretinal implant with integrated sensor chips for optical capturing shows a good biocompatibility profile in vitro and in vivo.

Background: Retinal degenerative diseases, e.g., retinitis pigmentosa, cause a severe decline of the visual function up to blindness.

The very large electrode array for retinal stimulation (VLARS)-A concept study.

Objective: The restoration of vision in blind patients suffering from degenerative retinal diseases like retinitis pigmentosa may be obtained by local electrical stimulation with retinal implants. In this study, a very large electrode array for retinal stimulation (VLARS) was introduced and tested regarding its safety in implantation and biocompatibility. Further, the array's stimulation capabilities were tested in an acute setting.

Toward a Bidirectional Communication Between Retinal Cells and a Prosthetic Device - A Proof of Concept.

Significant progress toward the recovery of useful vision in blind patients with severe degenerative retinal diseases caused by photoreceptor death has been achieved with the development of visual prostheses that stimulate the retina electrically. However, currently used prostheses do not provide feedback about the retinal activity before and upon stimulation and do not adjust to changes during the remodeling processes in the retina. Both features are desirable to improve the efficiency of the electrical stimulation (ES) therapy offered by these devices.

Properties of Retinal Precursor Cells Grown on Vertically Aligned Multiwalled Carbon Nanotubes Generated for the Modification of Retinal Implant-Embedded Microelectrode Arrays.

Background. To analyze the biocompatibility of vertically aligned multiwalled carbon nanotubes (MWCNT), used as nanomodification to optimize the properties of prostheses-embedded microelectrodes that induce electrical stimulation of surviving retinal cells. Methods.

Development of very large electrode arrays for epiretinal stimulation (VLARS).

Background: Retinal implants have been developed to treat blindness causing retinal degenerations such as Retinitis pigmentosa (RP). The retinal stimulators are covering only a small portion of the retina usually in its center. To restore not only central vision but also a useful visual field retinal stimulators need to cover a larger area of the retina.

Stacked planar micro coils for single-sided NMR applications.

This paper describes planar micro structured coils fabricated in a novel multilayer assembly for single-sided NMR experiments. By arranging the coil's turns in both lateral and vertical directions, all relevant coil parameters can be tailored to a specific application. To this end, we implemented an optimization algorithm based on simulations applying finite element methods (FEMs), which maximizes the coil's sensitivity and thus signal-to-noise ratio (SNR) while incorporating boundary conditions such as the coil's electrical properties and a localized sensitivity needed for single-sided applications.

A novel fully implantable wireless sensor system for monitoring hypertension patients.

This paper presents a novel fully implantable wireless sensor system intended for long-term monitoring of hypertension patients, designed for implantation into the femoral artery with computed tomography angiography. It consists of a pressure sensor and a telemetric unit, which is wirelessly connected to an extracorporeal readout station for energy supply and data recording. The system measures intraarterial pressure at a sampling rate of 30 Hz and an accuracy of ±1.

Bioprocess control in microscale: scalable fermentations in disposable and user-friendly microfluidic systems.

Background: The efficiency of biotechnological production processes depends on selecting the best performing microbial strain and the optimal cultivation conditions. Thus, many experiments have to be conducted, which conflicts with the demand to speed up drug development processes. Consequently, there is a great need for high-throughput devices that allow rapid and reliable bioprocess development.

Microfluidic biolector-microfluidic bioprocess control in microtiter plates.

In industrial-scale biotechnological processes, the active control of the pH-value combined with the controlled feeding of substrate solutions (fed-batch) is the standard strategy to cultivate both prokaryotic and eukaryotic cells. On the contrary, for small-scale cultivations, much simpler batch experiments with no process control are performed. This lack of process control often hinders researchers to scale-up and scale-down fermentation experiments, because the microbial metabolism and thereby the growth and production kinetics drastically changes depending on the cultivation strategy applied.

Implantation and explantation of a wireless epiretinal retina implant device: observations during the EPIRET3 prospective clinical trial.

Purpose: Visual sensations in patients with blindness and retinal degenerations may be restored by electrical stimulation of retinal neurons with implantable microelectrode arrays. A prospective trial was initiated to evaluate the safety and efficacy of a wireless intraocular retinal implant (EPIRET3) in six volunteers with blindness and RP.

Methods: The implant is a remotely controlled, fully intraocular wireless device consisting of a receiver and a stimulator module.

An implantable microsystem as a vision prosthesis.

Blindness is often the result of degeneration of the light sensitive rods and cones of the retina in conditions such as retinitis pigmentosa and macula degeneration. An implantable vision prosthesis has been developed that electrically stimulates the retinal ganglion cells in such a way that action potentials in retinal ganglion cells are evoked, causing a visual sensation in the visual cortex. Clinical trials are about to be conducted.

Sputtered iridium oxide for stimulation electrode coatings.

This work deals with the reactive RF-powered sputter deposition of iridium oxide for use as the active stimulation layer in functional medical implants. The oxygen gettered by the growing films is determined by an approach based on generic curves. Films deposited at different stages of oxygen integration show strong differences in electrochemical behaviour, caused by different morphologies.

Iridium sputtered at varying pressures and target-substrate-distances evaluated for use as stimulation electrode material.

Iridium was sputtered as the top layer of stimulation electrodes. The coatings were varied in their morphology by adjusting the total deposition pressure and the working distance (WD) of target and substrate. It is shown that the resulting different kinds of morphologies have a strong influence on stimulation characteristics.

Transponder-based sensor for monitoring electrical properties of biological cell solutions.

An inductive passive remote sensor circuit for monitoring fermentation processes is presented. The sensor circuit consists of an interdigital capacitor and a planar coil structured on a glass laminated FR4-printed circuit board. This circuit resonates at frequencies between 2 and 4 MHz.

Theoretical calculations and performance results of a PZT thin film actuator.

High piezoelectric coupling coefficients of PZT-based material systems can be employed for actuator functions in micro-electro-mechanical systems (MEMS) offering displacements and forces which outperform standard solutions. This paper presents simulation, fabrication, and development results of a stress-compensated, PZT-coated cantilever concept in which a silicon bulk micromachining process is used in combination with a chemical solution deposition (CSD) technique. Due to an analytical approach and a finite element method (FEM) simulation for a tip displacement of 10 microm, the actuator was designed with a cantilever length of 300 microm to 1000 microm.