Stabilization of Apolar Nanoparticle Dispersions by Molecular Additives.

We study the effect of additives on the colloidal stability of alkanethiol-coated gold nanoparticles. Cyclic amines and sulfides of different sizes were added to dispersions in decane at additive concentrations below 128 mM. Small-angle X-ray scattering (SAXS) indicated that tetrahydrothiophene reduced the agglomeration temperature, , by up to 29 °C, a considerable increase in colloidal stability.

Nanocrystal Assemblies: Current Advances and Open Problems.

We explore the potential of nanocrystals (a term used equivalently to nanoparticles) as building blocks for nanomaterials, and the current advances and open challenges for fundamental science developments and applications. Nanocrystal assemblies are inherently multiscale, and the generation of revolutionary material properties requires a precise understanding of the relationship between structure and function, the former being determined by classical effects and the latter often by quantum effects. With an emphasis on theory and computation, we discuss challenges that hamper current assembly strategies and to what extent nanocrystal assemblies represent thermodynamic equilibrium or kinetically trapped metastable states.

Piperidine and Pyridine Series Lead-Free Dion-Jacobson Phase Tin Perovskite Single Crystals and Their Applications for Field-Effect Transistors.

Two-dimensional (2D) organic-inorganic metal halide perovskites have gained immense attention as alternatives to three-dimensional (3D) perovskites in recent years. The hydrophobic spacers in the layered structure of 2D perovskites make them more moisture-resistant than 3D perovskites. Moreover, they exhibit unique anisotropic electrical transport properties due to a structural confinement effect.

Ligand-induced incompatible curvatures control ultrathin nanoplatelet polymorphism and chirality.

The ability of thin materials to shape-shift is a common occurrence that leads to dynamic pattern formation and function in natural and man-made structures. However, harnessing this concept to rationally design inorganic structures at the nanoscale has remained far from reach due to a lack of fundamental understanding of the essential physical components. Here, we show that the interaction between organic ligands and the nanocrystal surface is responsible for the full range of chiral shapes seen in colloidal nanoplatelets.

Electrophoretic Deposition of Single Nanoparticles.

The controlled assembly of colloid particles on a solid substrate has always been a major challenge in colloid and surface science. Here we provide an overview of electrophoretic deposition (EPD) of single charge-stabilized nanoparticles. We demonstrate that surface templated EPD (STEPD) assembly, which combines EPD with top-down nanofabrication, allows a wide range of nanoparticles to be built up into arbitrary structures with high speed, scalability, and excellent fidelity.

Thermal Disorder-Induced Strain and Carrier Localization Activate Reverse Halide Segregation.

The reversal of halide ions is studied under various conditions. However, the underlying mechanism of heat-induced reversal remains unclear. This work finds that dynamic disorder-induced localization of self-trapped polarons and thermal disorder-induced strain (TDIS) can be co-acting drivers of reverse segregation.

Janus helices: From fully attractive to hard helices.

The phase diagram of hard helices differs from its hard rods counterpart by the presence of chiral "screw" phases stemming from the characteristic helical shape, in addition to the conventional liquid crystal phases also found for rod-like particles. Using extensive Monte Carlo and Molecular Dynamics simulations, we study the effect of the addition of a short-range attractive tail representing solvent-induced interactions to a fraction of the sites forming the hard helices, ranging from a single-site attraction to fully attractive helices for a specific helical shape. Different temperature regimes exist for different fractions of the attractive sites, as assessed in terms of the relative Boyle temperatures, that are found to be rather insensitive to the specific shape of the helical particle.

Chloride-Based Additive Engineering for Efficient and Stable Wide-Bandgap Perovskite Solar Cells.

Metal halide perovskite based tandem solar cells are promising to achieve power conversion efficiency beyond the theoretical limit of their single-junction counterparts. However, overcoming the significant open-circuit voltage deficit present in wide-bandgap perovskite solar cells remains a major hurdle for realizing efficient and stable perovskite tandem cells. Here, a holistic approach to overcoming challenges in 1.

The Colloidal Stability of Apolar Nanoparticles in Solvent Mixtures.

Solvent engineering is a powerful and versatile method to tune colloidal stability. Here, we link the molecular structure of apolar ligand shells on gold nanoparticles with their colloidal stability in solvent mixtures. The agglomeration temperature of the particles was measured with small-angle X-ray scattering.

Remembering the Work of Phillip L. Geissler: A Coda to His Scientific Trajectory.

Phillip L. Geissler made important contributions to the statistical mechanics of biological polymers, heterogeneous materials, and chemical dynamics in aqueous environments. He devised analytical and computational methods that revealed the underlying organization of complex systems at the frontiers of biology, chemistry, and materials science.

The thermodynamic origins of chiral twist in monolayer assemblies of rod-like colloids.

The propagation of chirality across scales is a common but poorly understood phenomenon in soft matter. Here, using computer simulations, we study twisted monolayer assemblies formed by both chiral and achiral rod-like particles in the presence of non-adsorbing polymer and characterise the thermodynamic driving forces responsible for the twisting. We observe assemblies with both like and inverted chirality relative to the rods and show that the preferred twist is already determined during the initial stage of the self-assembly.

Nanoscale Faceting and Ligand Shell Structure Dominate the Self-Assembly of Nonpolar Nanoparticles into Superlattices.

Self-assembly of nanoscale structures at liquid-solid interfaces occurs in a broad range of industrial processes and is found in various phenomena in nature. Conventional theory assumes spherical particles and homogeneous surfaces, but that model is oversimplified, and nanoscale in situ observations are needed for a more complete understanding. Liquid-phase scanning transmission electron microscopy (LP-STEM) is used to examine the interactions that direct the self-assembly of superlattices formed by gold nanoparticles (AuNPs) in nonpolar liquids.

Magnetic optical rotary dispersion and magnetic circular dichroism in methylammonium lead halide perovskites.

Large magnetic optical rotary dispersion (Faraday rotation) has been demonstrated recently in methylammonium lead bromide. Here, we investigate the prospect of extending the active spectral range by altering the halogen. We also investigate the origins of large Faraday rotation in these diamagnetic materials using magnetic circular dichroism (MCD) spectroscopy and the Kramers-Kronig relations.

Singlet Fission in Concentrated TIPS-Pentacene Solutions: The Role of Excimers and Aggregates.

The excited-state dynamics of 6,13-bis(triisopropylsilylethynyl)pentacene is investigated to determine the role of excimer and aggregate formation in singlet fission in high-concentration solutions. Photoluminescence spectra were measured by excitation with the evanescent wave in total internal reflection, in order to avoid reabsorption effects. The spectra over nearly two magnitudes of concentration were nearly identical, with no evidence for excimer emission.

Crystal nucleation in colloidal rod suspensions: The effect of depletant size.

In order to better control the assembly of nanorods, knowledge of the pathways by which they form ordered structures is desirable. In this paper, we characterize crystal nucleation in suspensions of spherocylindrical rods with aspect ratio L/D = 2.3 in the presence of both small and large polymer depletants.

A dissipative particle dynamics model for studying dynamic phenomena in colloidal rod suspensions.

A dissipative particle dynamics (DPD) model is developed and demonstrated for studying dynamics in colloidal rod suspensions. The solvent is modeled as conventional DPD particles, while individual rods are represented by a rigid linear chain consisting of overlapping solid spheres, which interact with solvent particles through a hard repulsive potential. The boundary condition on the rod surface is controlled using a surface friction between the solid spheres and the solvent particles.

Light-induced reversal of ion segregation in mixed-halide perovskites.

Bandgap instability due to light-induced phase segregation in mixed-halide perovskites presents a major challenge for their future commercial use. Here we demonstrate that photoinduced halide-ion segregation can be completely reversed at sufficiently high illumination intensities, enabling control of the optical bandgap of a mixed-halide perovskite single crystal by optimizing the input photogenerated carrier density. We develop a polaron-based two-dimensional lattice model that rationalizes the experimentally observed phenomena by assuming that the driving force for photoinduced halide segregation is dependent on carrier-induced strain gradients that vanish at high carrier densities.

Stability of pinned surface nanobubbles against expansion: Insights from theory and simulation.

While growth and dissolution of surface nanobubbles have been widely studied in recent years, their stability under pressure changes or a temperature increase has not received the same level of scrutiny. Here, we present theoretical predictions based on classical theory for pressure and temperature thresholds (p and T) at which unstable growth occurs for the case of air nanobubbles on a solid surface in water. We show that bubbles subjected to pinning have much lower p and higher T compared to both unpinned and bulk bubbles of similar size, indicating that pinned bubbles can withstand a larger tensile stress (negative pressure) and higher temperatures.

When Like Destabilizes Like: Inverted Solvent Effects in Apolar Nanoparticle Dispersions.

We report on the colloidal stability of nanoparticles with alkanethiol shells in apolar solvents. Small-angle X-ray scattering and molecular dynamics simulations were used to characterize the interaction between nanoparticles in linear alkane solvents ranging from hexane to hexadecane, including 4 nm gold cores with hexadecanethiol shells and 6 nm cadmium selenide cores with octadecanethiol shells. We find that the agglomeration is enthalpically driven and that, contrary to what one would expect from classical colloid theory, the temperature at which the particles agglomerate increases with increasing solvent chain length.

Solution-Processed Faraday Rotators Using Single Crystal Lead Halide Perovskites.

Lead halide perovskites (LHPs) have become a promising alternative for a wide range of optoelectronic devices, thanks to their solution-processability and impressive optical and electrical properties. More recently, LHPs have been investigated in magneto-optic studies and have exhibited spin-polarized emission, photoinduced magnetization, and long spin lifetimes. Here, the viability of methylammonium lead bromide (MAPbBr) single crystals as solution-processed Faraday rotators is demonstrated.

Evaluation of the AMOEBA force field for simulating metal halide perovskites in the solid state and in solution.

In this work, we compare the existing nonpolarizable force fields developed to study the solid or solution phases of hybrid organic-inorganic halide perovskites with the AMOEBA polarizable force field. The aim is to test whether more computationally expensive polarizable force fields like AMOEBA offer better transferability between solution and solid phases, with the ultimate goal being the study of crystal nucleation, growth, and other interfacial phenomena involving these ionic compounds. In the context of hybrid perovskites, AMOEBA force field parameters already exist for several elements in solution, and we decided to leave them unchanged and to only parameterize the missing ones (Pb and CHNH ions) in order to maximize transferability and avoid overfitting to the specific examples studied here.

Self-assembly of spherical and rod-shaped nanoparticles with full positional control.

The controlled positioning of spherical gold nanoparticles and gold nanorods upon self-assembly on a substrate is of great interest for the fabrication of tailored plasmonic devices. Here, an electrostatic approach with a sequential two-step assembly protocol is presented as a cost-effective and high-yield alternative to previously presented, more complex proof of concepts. Three different geometries can be separately produced in large quantities relying on electrostatic attraction and repulsion of the charge-carrying building blocks: a single gold nanoparticle at the tip, the side or on top of a gold nanorod.

A versatile simulation method for studying phase behavior and dynamics in colloidal rod and rod-polymer suspensions.

Here, we present an implicit-solvent model for dynamic simulations of hard-rod and rod-polymer suspensions. Individual rods are represented by a rigid linear chain consisting of overlapping spheres which interact through a pseudohard-core potential based on the cut-and-shifted Mie (generalized Lennard-Jones) potential with exponents (50, 49). In the rod-polymer suspensions, the polymers are modeled as freely interpenetrable spheres with respect to each other, while there is the pseudohard-core repulsion between the polymer and rod spheres.