Freeze-Cast Composites of Alginate/Pyrophosphate-Stabilized Amorphous Calcium Carbonate: From the Nanoscale Structuration to the Macroscopic Properties.

Pyrophosphate-stabilized amorphous calcium carbonates (PyACC) are promising compounds for bone repair due to their ability to release calcium, carbonate, and phosphate ions following pyrophosphate hydrolysis. However, shaping these metastable and brittle materials using conventional methods remains a challenge, especially in the form of macroporous scaffolds, yet essential to promote cell colonization. To overcome these limitations, this article describes for the first time the design and multiscale characterization of freeze-cast alginate (Alg)-PyACC nanocomposite scaffolds.

Janus radial nanofiber patch with leak-proof, antimicrobial, and osteogenic integration for skull base reconstruction.

During transsphenoidal surgery to remove pituitary adenomas, the structures of the skull base consisting of the dura mater and skull base bones are destroyed, making it crucial to restore the natural structure of the skull base. We crafted a dual-layer Janus fiber membrane utilizing the layer-by-layer electrospinning technique, comprising an osteoblast layer and a leak-proof antimicrobial layer. Specifically, RPG-1%PCPP radially aligned nanofibrous membranes (osteoblasts) can promote directional cell migration and facilitate cellular osteogenic differentiation.

Energy level as a theranostic factor for successful therapy of tissue injuries with polyphosphate: the triad metabolic energy - mechanical energy - heat.

Tissue regeneration of skin and bone is an energy-intensive, ATP-consuming process that, if impaired, can lead to the development of chronic clinical pictures. ATP levels in the extracellular space including the exudate of wounds, especially chronic wounds, are low. This deficiency can be compensated by inorganic polyphosphate (polyP) supplied the blood platelets to the regenerating site.

Liquid-liquid phase transition as a basis for novel materials for skin repair and regeneration.

Inorganic materials are of increasing interest not only for bone repair but also for other applications in regenerative medicine. In this study, the combined effects of energy-providing, regeneratively active inorganic polyphosphate (polyP) and also morphogenetically active pearl powder on wound healing were investigated. Aragonite, the mineralic constituent of pearl nacre and thermodynamically unstable form of crystalline calcium carbonate, was found to be converted into a soluble state in the presence of a Ca-containing wound exudate, particularly upon addition of sodium polyP (Na-polyP), driven by the transfer of Ca ions from aragonite to polyP, leading to liquid-liquid phase separation to form an aqueous Ca-polyP coacervate.

Polyphosphate Nanoparticles: Balancing Energy Requirements in Tissue Regeneration Processes.

Nanoparticles of a particular, evolutionarily old inorganic polymer found across the biological kingdoms have attracted increasing interest in recent years not only because of their crucial role in metabolism but also their potential medical applicability: it is inorganic polyphosphate (polyP). This ubiquitous linear polymer is composed of 10-1000 phosphate residues linked by high-energy anhydride bonds. PolyP causes induction of gene activity, provides phosphate for bone mineralization, and serves as an energy supplier through enzymatic cleavage of its acid anhydride bonds and subsequent ATP formation.

The Physiological Inorganic Polymers Biosilica and Polyphosphate as Key Drivers for Biomedical Materials in Regenerative Nanomedicine.

There is a need for novel nanomaterials with properties not yet exploited in regenerative nanomedicine. Based on lessons learned from the oldest metazoan phylum, sponges, it has been recognized that two previously ignored or insufficiently recognized principles play an essential role in tissue regeneration, including biomineral formation/repair and wound healing. Firstly, the dependence on enzymes as a driving force and secondly, the availability of metabolic energy.

Caryophyllene-type sesquiterpenes from the endophytic fungus through an OSMAC approach.

Two new caryophyllene-type sesquiterpenes pestalotiopsins U and V ( and ) and three known compounds pestalotiopsin B (), pestaloporinate B (), and pestalotiopsin C () were isolated by the cultivation of the endophytic fungus on solid rice medium, while four additional new caryophyllene pestalotiopsins W-Z (-) were obtained when 3.5% NaI was added to the fungal culture medium. The structures of the new compounds were determined by HRESIMS and 1D/2D nuclear magnetic resonance data.

Microfragmented Fat and Biphasic Calcium Phosphates for Alveolar Cleft Repair: Protocol for a Prospective, Nonblinded, First-in-Human Clinical Study.

Background: Biphasic calcium phosphates (BCP) may serve as off-the-shelf alternatives for iliac crest-derived autologous bone in alveolar cleft reconstructions. To add osteoinductivity to the osteoconductive BCPs to achieve similar regenerative capacity as autologous bone, a locally harvested buccal fat pad will be mechanically fractionated to generate microfragmented fat (MFAT), which has been shown to have high regenerative capacity due to high pericyte and mesenchymal stem cell content and a preserved perivascular niche.

Objective: Our primary objectives will be to assess the feasibility and safety of the BCP-MFAT combination.

Cell migration, DNA fragmentation and antibacterial properties of novel silver doped calcium polyphosphate nanoparticles.

To combat infections, silver was used extensively in biomedical field but there was a need for a capping agent to eliminate its cytotoxic effects. In this study, polymeric calcium polyphosphate was doped by silver with three concentrations 1, 3 or 5 mol.% and were characterized by TEM, XRD, FTIR, TGA.

Acceleration of Wound Healing through Amorphous Calcium Carbonate, Stabilized with High-Energy Polyphosphate.

Amorphous calcium carbonate (ACC), precipitated in the presence of inorganic polyphosphate (polyP), has shown promise as a material for bone regeneration due to its morphogenetic and metabolic energy (ATP)-delivering properties. The latter activity of the polyP-stabilized ACC ("ACC∙PP") particles is associated with the enzymatic degradation of polyP, resulting in the transformation of ACC into crystalline polymorphs. In a novel approach, stimulated by these results, it was examined whether "ACC∙PP" also promotes the healing of skin injuries, especially chronic wounds.

Marine-Based Candidates as Potential RSK1 Inhibitors: A Computational Study.

Manzamines are chemically related compounds extracted from the methanolic extract of species. Seven compounds were identified by our research group and are being characterized. As their biological target is unknown, this work is based on previous screening work performed by Mayer et al.

Inorganic Polyphosphate: Coacervate Formation and Functional Significance in Nanomedical Applications.

Inorganic polyphosphates (polyP) are long-chain polymers of orthophosphate residues, which, depending on the external conditions, can be present both physiologically and synthetically in either soluble, nanoparticulate or coacervate form. In recent years, these polymers have received increasing attention due to their unprecedented ability to exhibit both morphogenetic and metabolic energy delivering properties. There are no other physiological molecules that contain as many metabolically utilizable, high-energy bonds as polyP, making these polymers of particular medical interest as components of advanced hydrogel scaffold materials for potential applications in ATP-dependent tissue regeneration and repair.

Molecular and biochemical approach for understanding the transition of amorphous to crystalline calcium phosphate deposits in human teeth.

Calcium phosphate (CaP) deposition during bone mineralization starts with the aggregation of Posner's clusters Ca(PO) into amorphous Ca-phosphate (ACP), which then transforms into crystalline CaP and finally maturates to hydroxyapatite (HA). Using dentin/enamel of human teeth as a model system, we show that the physiological inorganic polymer polyphosphate (polyP), a phosphate donor in mineralization, prevents the transition from amorphous to crystalline CaP at concentrations> 15 wt%. Stabilization of the amorphous phase of CaP by polyP is reversed by hydrolysis of the polymer by alkaline phosphatase (ALP), an enzyme that releases phosphate for mineralization.

Functional importance of coacervation to convert calcium polyphosphate nanoparticles into the physiologically active state.

Inorganic polyphosphates (polyP) are of increasing medical interest due to their unprecedented ability to exhibit both morphogenetic and ATP-delivering properties. However, these polymers are only physiologically active in the coacervate state, but not as amorphous nanoparticles (NP), the storage form of the polymer. Little is known about the mechanism of formation and interconversion of these two distinct polyP phases in the presence of metal ions.

Standard in vitro evaluations of engineered bone substitutes are not sufficient to predict in vivo preclinical model outcomes.

Understanding the optimal conditions required for bone healing can have a substantial impact to target the problem of non-unions and large bone defects. The combination of bioactive factors, regenerative progenitor cells and biomaterials to form a tissue engineered (TE) complex is a promising solution but translation to the clinic has been slow. We hypothesized the typical material testing algorithm used is insufficient and leads to materials being mischaracterized as promising.

Polyphosphate in Antiviral Protection: A Polyanionic Inorganic Polymer in the Fight Against Coronavirus SARS-CoV-2 Infection.

Polyanions as polymers carrying multiple negative charges have been extensively studied with regard to their potential antiviral activity. Most studies to date focused on organic polyanionic polymers, both natural and synthetic. The inorganic polymer, polyphosphate (polyP), despite the ubiquitous presence of this molecule from bacteria to man, has attracted much less attention.

Polyphosphate in Chronic Wound Healing: Restoration of Impaired Metabolic Energy State.

Many pathological conditions are characterized by a deficiency of metabolic energy. A prominent example is nonhealing or difficult-to-heal chronic wounds. Because of their unique ability to serve as a source of metabolic energy, inorganic polyphosphates (polyP) offer the opportunity to develop novel strategies to treat such wounds.

Inorganic Polymeric Materials for Injured Tissue Repair: Biocatalytic Formation and Exploitation.

Two biocatalytically produced inorganic biomaterials show great potential for use in regenerative medicine but also other medical applications: bio-silica and bio-polyphosphate (bio-polyP or polyP). Biosilica is synthesized by a group of enzymes called silicateins, which mediate the formation of amorphous hydrated silica from monomeric precursors. The polymeric silicic acid formed by these enzymes, which have been cloned from various siliceous sponge species, then undergoes a maturation process to form a solid biosilica material.

Prenylated cyclohexene-type meroterpenoids and sulfur-containing xanthones produced by Pseudopestalotiopsis theae.

Chemical investigation of the fungal endophyte Pseudopestalotiopsis theae isolated from leaves of Caloncoba welwitschii, collected in Cameroon, resulted in two previously undescribed sulfur-containing xanthone derivatives sydoxanthones D and E, in addition to three previously undescribed monomeric diisoprenyl-cyclohexene-type meroterpenoids biscognienynes D-F and five known natural products. The structures of the undescribed compounds were unambiguously identified by their mass spectra and by extensive 1D and 2D NMR spectroscopic analysis. Mosher's reaction was performed to determine the absolute configuration of sydoxanthones D and E while TDDFT-ECD calculations were used to assign the configuration of biscognienyne D.

Acceleration of chronic wound healing by bio-inorganic polyphosphate: studies and first clinical applications.

The healing of chronic wounds is impaired by a lack of metabolic energy. In previous studies, we showed that physiological inorganic polyphosphate (polyP) is a generator of metabolic energy by forming ATP as a result of the enzymatic cleavage of the high-energy phosphoanhydride bonds of this polymer. Therefore, in the present study, we investigated whether the administration of polyP can substitute for the energy deficiency in chronic wound healing.

3D bioprinting of tissue units with mesenchymal stem cells, retaining their proliferative and differentiating potential, in polyphosphate-containing bio-ink.

The three-dimensional (3D)-printing processes reach increasing recognition as important fabrication techniques to meet the growing demands in tissue engineering. However, it is imperative to fabricate 3D tissue units, which contain cells that have the property to be regeneratively active. In most bio-inks, a metabolic energy-providing component is missing.

An unexpected biomaterial against SARS-CoV-2: Bio-polyphosphate blocks binding of the viral spike to the cell receptor.

No other virus after the outbreak of the influenza pandemic of 1918 affected the world's population as hard as the coronavirus SARS-CoV-2. The identification of effective agents/materials to prevent or treat COVID-19 caused by SARS-CoV-2 is an urgent global need. This review aims to survey novel strategies based on inorganic polyphosphate (polyP), a biologically formed but also synthetically available polyanionic polymeric material, which has the potential of being a potent inhibitor of the SARS-CoV-2 virus-cell-docking machinery.