Recent Developments in Catalytic Carbonyl Sulfur Hydrolysis.

Carbonyl sulfide (COS) is the most abundant and longest-lasting organic reduced sulfur compound in the atmosphere. Removing it is a critical and challenging aspect in desulfurization technology in order to comply with global restrictions on harmful emissions. Catalytic hydrolysis refers to the process whereby COS reacts with water under the influence of a catalyst to generate carbon dioxide and hydrogen sulfide.

Degradation Mechanism of TOPCon Solar Cells in an Ambient Acid Environment.

n-Type tunnel oxide passivated contact (TOPCon) solar cells are expected to dominate the global photovoltaic market in the next decade, primarily owing to their rapidly increasing power conversion efficiency (PCE). However, acids generated from encapsulant hydrolysis under damp-heat (DH) conditions significantly impair the reliability of TOPCon solar cells. This study evaluated the degradation behavior of TOPCon solar cells under an accelerated test in an ambient acid environment.

Enhancing Conductivity in Silicon Heterojunction Solar Cells with Silver Nanowire-Assisted TiCT MXene Electrodes for Cost-Effective and Scalable Photovoltaics.

Silicon heterojunction (SHJ) solar cells have set world-record efficiencies among single-junction silicon solar cells, accelerating their commercial deployment. Despite these clear efficiency advantages, the high costs associated with low-temperature silver pastes (LTSP) for metallization have driven the search for more economical alternatives in mass production. 2D transition metal carbides (MXenes) have attracted significant attention due to their tunable optoelectronic properties and metal-like conductivity, the highest among all solution-processed 2D materials.

Skeletal muscle involvement in systemic amyloidosis is often overlooked.

Aim: Systemic amyloidosis is a condition in which misfolded amyloid fibrils are deposited within tissues. Amyloid myopathy is a rare manifestation of systemic amyloidosis. However, whether skeletal muscle involvement is underestimated and whether such deposition guarantees clinical and pathological myopathic features remain to be investigated.

In-situ sonochemical formation of N-graphyne modulated porous g-CN for boosted photocatalysis degradation of pollutants and nitrogen fixation.

Herein, Nitrogen-doped graphyne/porous g-CN composites are firstly in-situ synthesized via the ultrasound vibration of CaC, triazine, and porous g-CN in absolute ethanol. A variety of characterizations are performed to investigate the morphology, microstructure, composition, and electrical/optical features of the obtained composites, such as transmission electron microscopy, scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectra, X-ray photoelectron spectroscopy, and so forth. It is found that N-doped graphyne with flexible folds lamellar structure is intimately attached to flake g-CN in the as-prepared composites.

Establishment of an induced pluripotent stem cell (iPSC) line (INNDSUi004-A) from a patient with Congenital Nemaline Myopathy.

We used a non-integrated reprogramming approach to establish a human induced pluripotent stem cell (hiPSC) line (INNDSUi004-A) from the skin fibroblasts of a 13-year-old female individual with Congenital Nemaline Myopath. The cells obtained have typical characteristics of embryonic stem cells, show expression of specific pluripotency markers, and can differentiate into three germ layers in vitro. This iPSC cell line has the genetic information of the patient and is a good model for studying disease mechanisms and developing novel therapies.

Establishment of an induced pluripotent stem cell (iPSC) line (INNDSUi005-A) from a healthy female Chinese Han.

We obtained skin fibroblasts from a 34-year-old healthy woman and established a human induced pluripotent stem cell (hiPSC) line (INDSUi005-A) using a non-integrated reprogramming approach. The obtained cells have typical characteristics of embryonic stem cells, can express specific pluripotency markers and have the ability to differentiate into three germ layers in vitro. This iPSC cell line can be used as an in vitro model for studying disease mechanisms and developing novel therapies.

Flexible solar cells based on foldable silicon wafers with blunted edges.

Flexible solar cells have a lot of market potential for application in photovoltaics integrated into buildings and wearable electronics because they are lightweight, shockproof and self-powered. Silicon solar cells have been successfully used in large power plants. However, despite the efforts made for more than 50 years, there has been no notable progress in the development of flexible silicon solar cells because of their rigidity.

Supplementation of exogenous phytohormones for enhancing the removal of sulfamethoxazole and the simultaneous accumulation of lipid by Chlorella vulgaris.

In this study, the phytohormone gibberellins (GAs) were used to enhance sulfamethoxazole (SMX) removal and lipid accumulation in the microalgae Chlorella vulgaris. At the concentration of 50 mg/L GAs, the SMX removal achieved by C. vulgaris was 91.

Fully Textured, Production-Line Compatible Monolithic Perovskite/Silicon Tandem Solar Cells Approaching 29% Efficiency.

Perovskite/silicon tandem solar cells are promising avenues for achieving high-performance photovoltaics with low costs. However, the highest certified efficiency of perovskite/silicon tandem devices based on economically matured silicon heterojunction technology (SHJ) with fully textured wafer is only 25.2% due to incompatibility between the limitation of fabrication technology which is not compatible with the production-line silicon wafer.

Preparation of Activated Carbon-Based Solid Sulfonic Acid and Its Catalytic Performance in Biodiesel Preparation.

With activated carbon as raw material, AC-Ph-SOH was prepared after oxidation with nitric acid, modification with halogenated benzene and sulfonation with concentrated sulfuric acid. After modified by 10% bromobenzene with toluene as a solvent for 5 h, followed sulfonation with concentrated sulfuric acid at 150°C, the -SOH content of prepared AC-Ph-SOH was 0.64 mmol/g.

One-Step Formation of Low Work-Function, Transparent and Conductive MgF O Electron Extraction for Silicon Solar Cells.

The development of high-performance dopant-free silicon solar cells is severely bottlenecked by opaque electron selective contact. In this paper, high transmittance (80.5% on glass) and low work function (2.

Progress and Future Prospects of Wide-Bandgap Metal-Compound-Based Passivating Contacts for Silicon Solar Cells.

Advanced doped-silicon-layer-based passivating contacts have boosted the power conversion efficiency (PCE) of single-junction crystalline silicon (c-Si) solar cells to over 26%. However, the inevitable parasitic light absorption of the doped silicon layers impedes further PCE improvement. To this end, alternative passivating contacts based on wide-bandgap metal compounds (so-called dopant-free passivating contacts (DFPCs)) have attracted great attention, thanks to their potential merits in terms of parasitic absorption loss, ease-of-deposition, and cost.

Engineering transition metal catalysts for large-current-density water splitting.

Electrochemical water splitting plays a crucial role in transferring electricity to hydrogen fuel and appropriate electrocatalysts are crucial to satisfy the strict industrial demand. However, the successfully developed non-noble metal catalysts have a small tested range and the current density is usually less than 100 mA cm, which is still far away from the practical application standards. Aiming to provide guidance for the fabrication of more advanced electrocatalysts with a large current density, we herein systematically summarize the recent progress achieved in the field of cost-efficient and large-current-density electrocatalyst design.

Centimetre-scale perovskite solar cells with fill factors of more than 86 per cent.

Owing to rapid development in their efficiency and stability, perovskite solar cells are at the forefront of emerging photovoltaic technologies. State-of-the-art cells exhibit voltage losses approaching the theoretical minimum and near-unity internal quantum efficiency, but conversion efficiencies are limited by the fill factor (<83%, below the Shockley-Queisser limit of approximately 90%). This limitation results from non-ideal charge transport between the perovskite absorber and the cell's electrodes.

The B56α subunit of PP2A is necessary for mesenchymal stem cell commitment to adipocyte.

Adipose tissue plays a major role in maintaining organismal metabolic equilibrium. Control over the fate decision from mesenchymal stem cells (MSCs) to adipocyte differentiation involves coordinated command of phosphorylation. Protein phosphatase 2A plays an important role in Wnt pathway and adipocyte development, yet how PP2A complexes actively respond to adipocyte differentiation signals and acquire specificity in the face of the promiscuous activity of its catalytic subunit remains unknown.

Linking Chromosomal Silencing With Expression From Autosomal Integrated Transgenes.

is the master regulator of X-Chromosome Inactivation (XCI), the mammalian dosage compensation mechanism that silences one of the two X chromosomes in a female cell. XCI is established during early embryonic development. transgene (Tg) integrated into an autosome can induce transcriptional silencing of flanking genes; however, the effect and mechanism of RNA on autosomal sequence silencing remain elusive.

Solution-Doped Polysilicon Passivating Contacts for Silicon Solar Cells.

In this work, we present a simple and efficient solution-doping process for preparing high-quality polycrystalline silicon (poly-Si)-based passivating contacts. Commercial phosphorus or boron-doping solutions are spin-coated on crystalline silicon (c-Si) wafers that feature SiO/poly-Si layers; the doping process is then activated by thermal annealing at high temperatures in a nitrogen atmosphere. With optimized n- and p-type solution doping and thermal annealing, n- and p-type poly-Si passivating contacts featuring simultaneously a low contact recombination parameter () of 2.

Nanoscale localized contacts for high fill factors in polymer-passivated perovskite solar cells.

Polymer passivation layers can improve the open-circuit voltage of perovskite solar cells when inserted at the perovskite-charge transport layer interfaces. Unfortunately, many such layers are poor conductors, leading to a trade-off between passivation quality (voltage) and series resistance (fill factor, FF). Here, we introduce a nanopatterned electron transport layer that overcomes this trade-off by modifying the spatial distribution of the passivation layer to form nanoscale localized charge transport pathways through an otherwise passivated interface, thereby providing both effective passivation and excellent charge extraction.

A ball-milling synthesis of N-graphyne with controllable nitrogen doping sites for efficient electrocatalytic oxygen evolution and supercapacitors.

Low-cost and efficient multifunctional electrodes play an important part in promoting the practical application of energy conversion and storage. Herein, we report the facile synthesis of N-graphyne, with a novel structure, by one-step ball milling of CaC2 and pyrazine. The accurate doping of nitrogen atoms at the controllable sites of the molecular skeleton of γ-graphyne was achieved using the nitrogenous precursor (pyrazine) as a reactant.