Molecular engineering of nanocellulose-poly(lactic acid) bio-nanocomposite interface by reactive surface grafting from copolymerization.

Poly(lactic acid) (PLA) is a widely reusable polymer, but its practical applications are greatly constrained by low toughness and poor crystallinity. In this study, the modified cellulose nanocrystal (CNC) was designed as a reinforcement through surface copolymerization of caprolactone (CL) and allyl caprolactone (ACL) to enhance the properties of PLA. The surface molecular engineering of reactive core-shell nanofillers (allyl polycaprolactone-grafted CNC, or CNC-g-APCL) effectively improved the interfacial compatibility between PLA and CNC through a straightforward in situ reactive extrusion process.

Interfacial Engineering of Soft Matter Substrates by Solid-State Polymer Adsorption.

Polymer coating to substrates alters surface chemistry and imparts bulk material functionalities with a minute thickness, even in nanoscale. Specific surface modification of a substate usually requires an active substrate that, e.g.

Stimuli-responsive thin film composites of conducting polymers and cellulose nanocrystals for tissue engineering.

Thin composite films comprising two primary representatives of conducting polymers, poly(3, 4-ethylenedioxythiophene) (PEDOT) and polypyrrole (PPy), with eco-friendly cellulose nanocrystals (CNC) were prepared through electrochemical polymerization. The combination of CNC and PEDOT (or PPy) results in the formation of films with highly different surface topography and thickness. Intriguingly, different surface conductivity of PEDOT and PPy was revealed by atomic force microscopy albeit that the electrochemical properties were rather similar.

Aqueous Processable One-Dimensional Polypyrrole Nanostructured by Lignocellulose Nanofibril: A Conductive Interfacing Biomaterial.

One-dimensional (1D) nanomaterials of conductive polypyrrole (PPy) are competitive biomaterials for constructing bioelectronics to interface with biological systems. Synergistic synthesis using lignocellulose nanofibrils (LCNF) as a structural template in chemical oxidation of pyrrole with Fe(III) ions facilitates surface-confined polymerization of pyrrole on the nanofibril surface within a submicrometer- and micrometer-scale fibril length. It yields a core-shell nanocomposite of PPy@LCNF, wherein the surface of each individual fibril is coated with a thin nanoscale layer of PPy.

Heteroaggregation effects on Pickering stabilization using oppositely charged cellulose nanocrystal and nanochitin.

Pickering emulsions are stabilized using complexes of cellulose nanocrystals (CNC) and nanochitin (NCh). The colloidal behavior and heteroaggregation in aqueous media are studied in relation to complex formation and net charge. The complexes are remarkably effective in stabilizing oil-in-water Pickering emulsions under conditions of slightly net positive or negative charges, as determined by the CNC/NCh mass ratio.

Understanding Nanocellulose-Water Interactions: Turning a Detriment into an Asset.

Modern technology has enabled the isolation of nanocellulose from plant-based fibers, and the current trend focuses on utilizing nanocellulose in a broad range of sustainable materials applications. Water is generally seen as a detrimental component when in contact with nanocellulose-based materials, just like it is harmful for traditional cellulosic materials such as paper or cardboard. However, water is an integral component in plants, and many applications of nanocellulose already accept the presence of water or make use of it.

Water-soluble polysaccharides promoting production of redispersible nanocellulose.

To date, the energy-intensive production and high-water content severely limits nanocellulose applications on a large scale off-site. In this study, adding water-soluble polysaccharides (PS) to achieve an integrated process of water-redispersible nanocellulose production was well established. The addition of PS, in particular carboxymethylated-galactoglucomannan (cm-GGM), facilitates fibre fibrillation enabling homogenization at a higher solid content at 1.

Injectable thiol-ene hydrogel of galactoglucomannan and cellulose nanocrystals in delivery of therapeutic inorganic ions with embedded bioactive glass nanoparticles.

We propose an injectable nanocomposite hydrogel that is photo-curable via light-induced thiol-ene addition between methacrylate modified O-acetyl-galactoglucomannan (GGMMA) and thiolated cellulose nanocrystal (CNC-SH). Compared to free-radical chain polymerization, the orthogonal step-growth of thiol-ene addition allows a less heterogeneous hydrogel network and more rapid crosslinking kinetics. CNC-SH reinforced the GGMMA hydrogel as both a nanofiller and a crosslinker to GGMMA resulting in an interpenetrating network via thiol-ene addition.

Solid-state polymer adsorption for surface modification: The role of molecular weight.

Hypothesis: Solid-state polymer adsorption offers a distinct approach for surface modification. These ultrathin, so-called Guiselin layers can easily be obtained by placing a polymer melt in contact with an interface, followed by a removal of the non-adsorbed layer with a good solvent. While the mechanism of formation has been well established for Guiselin layers, their stability, crucial from the perspective of materials applications, is not.

Pickering Emulsions Interfacial Nanoparticle Complexation of Oppositely Charged Nanopolysaccharides.

We consider the variables relevant to adsorption of renewable nanoparticles and stabilization of multiphase systems, including the particle's hydrophilicity, electrostatic charge, axial aspect, and entanglement. Exploiting the complexation of two oppositely charged nanopolysaccharides, cellulose nanofibrils (CNFs) and nanochitin (NCh), we prepared CNF/NCh aqueous suspensions and identified the conditions for charge balance (turbidity and electrophoretic mobility titration). By adjusting the composition of CNF/NCh complexes, below and above net neutrality conditions, we produced sunflower oil-in-water Pickering emulsions with adjustable droplet diameters and stability against creaming and oiling-off.

Human Dermal Fibroblast Viability and Adhesion on Cellulose Nanomaterial Coatings: Influence of Surface Characteristics.

Biodegradable and renewable materials, such as cellulose nanomaterials, have been studied as a replacement material for traditional plastics in the biomedical field. Furthermore, in chronic wound care, modern wound dressings, hydrogels, and active synthetic extracellular matrices promoting tissue regeneration are developed to guide cell growth and differentiation. Cells are guided not only by chemical cues but also through their interaction with the surrounding substrate and its physicochemical properties.

A honeycomb-like paper-based thermoelectric generator based on a BiTe/bacterial cellulose nanofiber coating.

The intrinsic properties of paper, such as its light weight, flexibility, foldability, portability and degradability, have led to increasing interest in fabricating flexible energy storage devices and power supply devices on paper-based substrates. Hereby, a robust honeycomb-like thermoelectric generator (TEG) inspired by the origami and kirigami techniques was established in the present study. A thermoelectric ink with the properties of high electrical conductivity and low thermal conductivity was formulated by Bi2Te3 and bacterial cellulose (BC).

Surface Engineered Biomimetic Inks Based on UV Cross-Linkable Wood Biopolymers for 3D Printing.

Owing to their superior mechanical strength and structure similarity to the extracellular matrix, nanocelluloses as a class of emerging biomaterials have attracted great attention in three-dimensional (3D) bioprinting to fabricate various tissue mimics. Yet, when printing complex geometries, the desired ink performance in terms of shape fidelity and object resolution demands a wide catalogue of tunability on the material property. This paper describes surface engineered biomimetic inks based on cellulose nanofibrils (CNFs) and cross-linkable hemicellulose derivatives for UV-aided extrusion printing, being inspired by the biomimetic aspect of intrinsic affinity of heteropolysaccharides to cellulose in providing the ultrastrong but flexible plant cell wall structure.

On Low-Concentration Inks Formulated by Nanocellulose Assisted with Gelatin Methacrylate (GelMA) for 3D Printing toward Wound Healing Application.

Cellulose nanofibrils (CNFs) in the form of hydrogels stand out as a platform biomaterial in bioink formulation for 3D printing because of their low cytotoxicity and structural similarity to extracellular matrices. In the present study, 3D scaffolds were successfully printed with low-concentration inks formulated by 1 w/v % 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized CNF with less than 1 w/v % gelatin methacrylate (GelMA). Quartz crystal microbalance with dissipation monitoring (QCM-D) measurements showed strong interaction between the two biopolymers.

Current advances and future perspectives of 3D printing natural-derived biopolymers.

3D printing enables the complex or customized structures production in high speed and resolution. However, the lack of bio-based materials with user-defined biochemical and mechanical property is a significant barrier that limits the widespread adoption of 3D printing for products fabrication. Development of eco-friendly natural-derived biopolymers for 3D printing technologies and their promising application in different areas are of huge academic, and environmental interests.

3D printing of nanocellulose hydrogel scaffolds with tunable mechanical strength towards wound healing application.

We present for the first time approaches to 3D-printing of nanocellulose hydrogel scaffolds based on double crosslinking, first by in situ Ca crosslinking and post-printing by chemical crosslinking with 1,4-butanediol diglycidyl ether (BDDE). Scaffolds were successfully printed from 1% nanocellulose hydrogels, with their mechanical strength being tunable in the range of 3 to 8 kPa. Cell tests suggest that the 3D-printed and BDDE-crosslinked nanocellulose hydrogel scaffolds supported fibroblast cells' proliferation, which was improving with increasing rigidity.

Three-Dimensional Printing of Wood-Derived Biopolymers: A Review Focused on Biomedical Applications.

Wood-derived biopolymers have attracted great attention over the past few decades due to their abundant and versatile properties. The well-separated three main components, i.e.

Solubility of Softwood Hemicelluloses.

It is demonstrated that the molecular solubility of softwood hemicelluloses is significantly influenced by pretreatment of the fibers, extraction, and downstream processing. To quantify these effects, four hemicellulose samples were extracted from different thermomechanical pulps of Norway spruce. The molecular solubility of the samples was characterized by size and molar mass distributions, and the morphology of the molecules was studied using high resolution microscopy techniques.

Novel biorenewable composite of wood polysaccharide and polylactic acid for three dimensional printing.

Hemicelluloses, the second most abundant polysaccharide right after cellulose, are in practice still treated as a side-stream in biomass processing industries. In the present study, we report an approach to use a wood-derived and side-stream biopolymer, spruce wood hemicellulose (galactoglucomannan, GGM) to partially replace the synthetic PLA as feedstock material in 3D printing. A solvent blending approach was developed to ensure the even distribution of the formed binary biocomposites.

Synthesis of tunable hydrogels based on O-acetyl-galactoglucomannans from spruce.

Hydrogels with tunable mechanical properties based on O-acetyl-galactoglucomannans (GGMs) from spruce functionalized with tyramine, a molecule containing crosslinkable phenolic groups, were prepared. Gel formation was induced by enzymatic crosslinking at the addition of horse radish peroxidase and hydrogen peroxide to the modified GGMs. The degree of substitution determined the hydrogels final properties, and was varied by TEMPO oxidation of GGM to a degree of oxidation from 10 to 60%.

Cellulose nanocrystals prepared via formic acid hydrolysis followed by TEMPO-mediated oxidation.

Cellulose nanocrystals (CNCs) as a renewable and biodegradable nanomaterial have wide application value. In this work, CNCs were extracted from bleached chemical pulp using two stages of isolation (i.e.