Multiscale fiber remodeling in the infarcted left ventricle using a stress-based reorientation law.

The organization of myofibers and extra cellular matrix within the myocardium plays a significant role in defining cardiac function. When pathological events occur, such as myocardial infarction (MI), this organization can become disrupted, leading to degraded pumping performance. The current study proposes a multiscale finite element (FE) framework to determine realistic fiber distributions in the left ventricle (LV).

UV-induced reactive species dynamics and product formation by chlorite.

Chlorite (ClO) is a regulated byproduct of chlorine dioxide water treatment processes. The transformation of chlorite under UV irradiation into chloride (Cl) and chlorate (ClO) involves reactive species chain reactions that could enhance chlorine dioxide water treatment efficiency while reducing residual chlorite levels. This study conducted a mechanistic investigation of chlorite phototransformation by analyzing reaction intermediates and stable end products, including chlorine dioxide (ClO), free chlorine (HOCl/OCl), hydroxyl‑radical (OH), Cl, and ClO through combined experimental and modeling approaches.

Advanced oxidation processes for water and wastewater treatment - Guidance for systematic future research.

Advanced oxidation processes (AOPs) are a growing research field with a large variety of different process variants and materials being tested at laboratory scale. However, despite extensive research in recent years and decades, many variants have not been transitioned to pilot- and full-scale operation. One major concern are the inconsistent experimental approaches applied across different studies that impede identification, comparison, and upscaling of the most promising AOPs.

Direct Determination of Absolute Radical Quantum Yields in Hydroxyl and Sulfate Radical-Based Treatment Processes.

The absolute radical quantum yield () is a critical parameter to evaluate the efficiency of radical-based processes in engineered water treatment. However, measuring is fraught with challenges, as current quantification methods lack selectivity, specificity, and anti-interference capabilities, resulting in significant error propagation. Herein, we report a direct and reliable time-resolved technique to determine at pH 7.

Multiscale Finite Element Modeling of Left Ventricular Growth in Simulations of Valve Disease.

Multiscale models of the cardiovascular system are emerging as effective tools for investigating the mechanisms that drive ventricular growth and remodeling. These models can predict how molecular-level mechanisms impact organ-level structure and function and could provide new insights that help improve patient care. MyoFE is a multiscale computer framework that bridges molecular and organ-level mechanisms in a finite element model of the left ventricle that is coupled with the systemic circulation.

Microbial community and antimicrobial resistance niche differentiation in a multistage, surface flow constructed wetland.

Free-living (FL) and particulate-associated (PA) communities are distinct bacterioplankton lifestyles with different mobility and dissemination routes. Understanding spatio-temporal dynamics of PA and FL fractions will allow improvement to wastewater treatment processes including pathogen and AMR bacteria removal. In this study, PA, FL and sediment community composition and antimicrobial resistance gene (ARG; tetW, ermB, sul1, intI1) dynamics were investigated in a full-scale municipal wastewater free-water surface polishing constructed wetland.

Building digital patient pathways for the management and treatment of multiple sclerosis.

Recent advances in the field of artificial intelligence (AI) could yield new insights into the potential causes of multiple sclerosis (MS) and factors influencing its course as the use of AI opens new possibilities regarding the interpretation and use of big data from not only a cross-sectional, but also a longitudinal perspective. For each patient with MS, there is a vast amount of multimodal data being accumulated over time. But for the application of AI and related technologies, these data need to be available in a machine-readable format and need to be collected in a standardized and structured manner.

Ophthalmic surgeries on porcine eyes with picosecond ultrashort laser pulses.

Purpose: This work demonstrates significant advantages in ophthalmic surgeries through the use of picosecond ultrashort laser pulses instead of state-of-the-art nanosecond laser pulses. These ultrashort lasers shall serve as universal tools more effectively combining advantages of high precision, low impact and economic advantages compared to existing instruments.

Methods: As samples, we used post-mortem porcine eyes on which we performed the experiments with both picosecond and nanosecond lasers.

A multiscale finite element model of left ventricular mechanics incorporating baroreflex regulation.

Cardiovascular function is regulated by a short-term hemodynamic baroreflex loop, which tries to maintain arterial pressure at a normal level. In this study, we present a new multiscale model of the cardiovascular system named MyoFE. This framework integrates a mechanistic model of contraction at the myosin level into a finite-element-based model of the left ventricle pumping blood through the systemic circulation.

Utilization of Engineering Advances for Detailed Biomechanical Characterization of the Mitral-Ventricular Relationship to Optimize Repair Strategies: A Comprehensive Review.

The geometrical details and biomechanical relationships of the mitral valve-left ventricular apparatus are very complex and have posed as an area of research interest for decades. These characteristics play a major role in identifying and perfecting the optimal approaches to treat diseases of this system when the restoration of biomechanical and mechano-biological conditions becomes the main target. Over the years, engineering approaches have helped to revolutionize the field in this regard.

Building a monitoring matrix for the management of multiple sclerosis.

Multiple sclerosis (MS) has a longitudinal and heterogeneous course, with an increasing number of therapy options and associated risk profiles, leading to a constant increase in the number of parameters to be monitored. Even though important clinical and subclinical data are being generated, treating neurologists may not always be able to use them adequately for MS management. In contrast to the monitoring of other diseases in different medical fields, no target-based approach for a standardized monitoring in MS has been established yet.

Microplastic biofilm, associated pathogen and antimicrobial resistance dynamics through a wastewater treatment process incorporating a constructed wetland.

Microplastics in wastewater are colonized by biofilms containing pathogens and antimicrobial resistance (AMR) genes that can be exported into receiving water bodies. This study investigated establishment and changes in microplastic-associated biofilm and AMR during a conventional full-scale 2100 population equivalent wastewater treatment process combined with a free water surface polishing constructed wetland. Sequential microplastic colonization experiments were conducted at different stages of the wastewater treatment process, including in raw sewage, treated effluent and the constructed wetland.

Correction: Increased photocorrosion resistance of ZnO foams transition metal doping.

[This corrects the article DOI: 10.1039/D2RA06730G.].

Increased photocorrosion resistance of ZnO foams via transition metal doping.

ZnO is a widely studied photocatalyst, but practical use is hindered by its low resistance to photocorrosion in water, which leads to metal leaching and loss of performance over time. In this work, highly porous and mechanically stable ZnO foams, called MolFoams, were doped by adding 1% or 2% Co, Ni or Cu salts to the starting Zn salt, followed by air insufflation during a sol-gel rection and sintering. The resulting doped foams showed a major increase in stability, with a 60-85% reduction in Zn leaching after irradiation, albeit with a reduction in photocatalytic activity.

Computational analysis of ventricular mechanics in hypertrophic cardiomyopathy patients.

Hypertrophic cardiomyopathy (HCM) is a genetic heart disease that is associated with many pathological features, such as a reduction in global longitudinal strain (GLS), myofiber disarray and hypertrophy. The effects of these features on left ventricle (LV) function are, however, not clear in two phenotypes of HCM, namely, obstructive and non-obstructive. To address this issue, we developed patient-specific computational models of the LV using clinical measurements from 2 female HCM patients and a control subject.

Microplastic dynamics in a free water surface constructed wetland.

This study investigates microplastic (MPs) dynamics of a recently established surface flow 2100 population equivalent polishing constructed wetland (CW) receiving 1.4 ML per day of secondary treated wastewater. MPs type, size ranges and concentrations were measured along the CW at a 2-months sampling campaign.

A multiscale model of the cardiovascular system that regulates arterial pressure via closed loop baroreflex control of chronotropism, cell-level contractility, and vascular tone.

Multiscale models of the cardiovascular system can provide new insights into physiological and pathological processes. PyMyoVent is a computer model that bridges from molecular- to organ-level function and which simulates a left ventricle pumping blood through the systemic circulation. Initial work with PyMyoVent focused on the end-systolic pressure volume relationship and ranked potential therapeutic strategies by their impact on contractility.

Alumina as a Computed Tomography Soft Material and Tissue Fiducial Marker.

Background: The use of 3D imaging is becoming increasingly common, so too is the use of fiducial markers to identify/track regions of interest and assess material deformation. While many different materials have been used as fiducials, they are often used in isolation, with little comparison to one another.

Objective: In the current study, we aim to directly compare different Computed Tomography (CT and μCT) fiducial materials, both metallic and nonmetallic.

Rapid transition from in-person to videoconferencing psychotherapy in a counselor training clinic: A safety and feasibility study during the COVID-19 pandemic.

Due to the COVID-19 pandemic, many counselor training clinics rapidly transitioned in-person (IP) services to videoconferencing psychotherapy (VCP). Because VCP is a relatively new technology, more research is needed to establish whether this delivery format is a safe and acceptable substitute for IP services in counselor training clinics. The purpose of this study is to explore questions related to how clients perceive VCP versus IP in terms of credibility and expectancy.

Decolorization and control of bromate formation in membrane ozonation of humic-rich groundwater.

Membrane ozonation of bromide-containing, high-color natural organic matter (NOM) containing groundwater was performed using single-tube polydimethylsiloxane (PDMS) and multi-tube polytetrafluoroethylene (PTFE) membrane contactors, and compared to batch ozonation. For membrane ozonation, dissolved ozone concentration, water color (VIS), ultraviolet light absorption (UV) and bromate formation were correlated with ozone dose, ozone gas concentration, hydraulic retention time and Hatta number (Ha). NOM color removal of up to 45 % for the single-tube contactor and 17 % for the multi-tube contactor were achieved while containing bromate formation below 10 µg L.

Effects of g-CN Heterogenization into Intrinsically Microporous Polymers on the Photocatalytic Generation of Hydrogen Peroxide.

Graphitic carbon nitride (g-CN) is known to photogenerate hydrogen peroxide in the presence of hole quenchers in aqueous environments. Here, the g-CN photocatalyst is embedded into a host polymer of intrinsic microporosity (PIM-1) to provide recoverable heterogenized photocatalysts without loss of activity. Different types of g-CN (including Pt@g-CN, Pd@g-CN, and Au@g-CN) and different quenchers are investigated.

Reproducibility of Systolic Strain in Mice Using Cardiac Magnetic Resonance Feature Tracking of Black-Blood Cine Images.

Purpose: Mouse models are widely utilized to enhance our understanding of cardiac disease. The goal of this study is to investigate the reproducibility of strain parameters that were measured in mice using cardiac magnetic resonance (CMR) feature-tracking (CMR42, Canada).

Methods: We retrospectively analyzed black-blood CMR datasets from thirteen C57BL/6 B6.