Characterization of 3D printed micro-blades for cutting tissue-embedding material.

Cutting soft materials on the microscale has emerging applications in single-cell studies, tissue microdissection for organoid culture, drug screens, and other analyses. However, the cutting process is complex and remains incompletely understood. Furthermore, precise control over blade geometries, such as the blade tip radius, has been difficult to achieve.

Triply periodic minimal surfaces for thermo-mechanical protection.

Triply periodic minimal surface (TPMS) metamaterials show promise for thermal management systems but are challenging to integrate into existing packaging with strict mechanical requirements. Composite TPMS lattices may offer more control over thermal and mechanical properties through material and geometric tuning. Here, we fabricate copper-plated, 3D-printed triply periodic minimal surface primitive lattices and evaluate their suitability for battery thermal management systems.

Upconverting microgauges reveal intraluminal force dynamics in vivo.

The forces generated by action potentials in muscle cells shuttle blood, food and waste products throughout the luminal structures of the body. Although non-invasive electrophysiological techniques exist, most mechanosensors cannot access luminal structures non-invasively. Here we introduce non-toxic ingestible mechanosensors to enable the quantitative study of luminal forces and apply them to study feeding in living Caenorhabditis elegans roundworms.

High absorptivity nanotextured powders for additive manufacturing.

The widespread application of metal additive manufacturing (AM) is limited by the ability to control the complex interactions between the energy source and the feedstock material. Here, we develop a generalizable process to introduce nanoscale grooves to the surface of metal powders which increases the powder absorptivity by up to 70% during laser powder bed fusion. Absorptivity enhancements in copper, copper-silver, and tungsten enable energy-efficient manufacturing, with printing of pure copper at relative densities up to 92% using laser energy densities as low as 83 joules per cubic millimeter.

Direct observation of phase transitions in truncated tetrahedral microparticles under quasi-2D confinement.

Colloidal crystals are used to understand fundamentals of atomic rearrangements in condensed matter and build complex metamaterials with unique functionalities. Simulations predict a multitude of self-assembled crystal structures from anisotropic colloids, but these shapes have been challenging to fabricate. Here, we use two-photon lithography to fabricate Archimedean truncated tetrahedrons and self-assemble them under quasi-2D confinement.

Application of improved GalNAc conjugation in development of cost-effective siRNA therapies targeting cardiovascular diseases.

N-Acetylgalactosamine (GalNAc)-conjugated small interfering RNA (siRNA) therapies have received approval for treating both orphan and prevalent diseases. To improve in vivo efficacy and streamline the chemical synthesis process for efficient and cost-effective manufacturing, we conducted this study to identify better designs of GalNAc-siRNA conjugates for therapeutic development. Here, we present data on redesigned GalNAc-based ligands conjugated with siRNAs against angiopoietin-like 3 (ANGPTL3) and lipoprotein (a) (Lp(a)), two target molecules with the potential to address large unmet medical needs in atherosclerotic cardiovascular diseases.

Size-Induced Ferroelectricity in Antiferroelectric Oxide Membranes.

Despite extensive studies on size effects in ferroelectrics, how structures and properties evolve in antiferroelectrics with reduced dimensions still remains elusive. Given the enormous potential of utilizing antiferroelectrics for high-energy-density storage applications, understanding their size effects will provide key information for optimizing device performances at small scales. Here, the fundamental intrinsic size dependence of antiferroelectricity in lead-free NaNbO membranes is investigated.

Direct Observation of the Pressure-Induced Structural Variation in Gold Nanoclusters and the Correlated Optical Response.

The ability to gradually modify the atomic structures of nanomaterials and directly identify such structural variation is important in nanoscience research. Here, we present the first example of a high-pressure single-crystal X-ray diffraction analysis of atomically precise metal nanoclusters. The pressure-dependent, subangstrom structural evolution of an ultrasmall gold nanoparticle, AuS, has been directly identified.

Mechanical nanolattices printed using nanocluster-based photoresists.

Natural materials exhibit emergent mechanical properties as a result of their nanoarchitected, nanocomposite structures with optimized hierarchy, anisotropy, and nanoporosity. Fabrication of such complex systems is currently challenging because high-quality three-dimensional (3D) nanoprinting is mostly limited to simple, homogeneous materials. We report a strategy for the rapid nanoprinting of complex structural nanocomposites using metal nanoclusters.

Extraordinary Strain Hardening from Dislocation Loops in Defect-Free Al Nanocubes.

The complex interaction of crystalline defects leads to strain hardening in bulk metals. Metals with high stacking fault energy (SFE), such as aluminum, tend to have low strain hardening rates due to an inability to form stacking faults and deformation twins. Here, we use scanning electron microscopy (SEM) mechanical compressions to find that colloidally synthesized defect-free 114 nm Al nanocubes combine a high linear strain hardening rate of 4.

Engineering Bright and Mechanosensitive Alkaline-Earth Rare-Earth Upconverting Nanoparticles.

Upconverting nanoparticles (UCNPs) are an emerging platform for mechanical force sensing at the nanometer scale. An outstanding challenge in realizing nanometer-scale mechano-sensitive UCNPs is maintaining a high mechanical force responsivity in conjunction with bright optical emission. This Letter reports mechano-sensing UCNPs based on the lanthanide dopants Yb and Er, which exhibit a strong ratiometric change in emission spectra and bright emission under applied pressure.

Machine learning analysis of self-assembled colloidal cones.

Optical and confocal microscopy is used to image the self-assembly of microscale colloidal particles. The density and size of self-assembled structures is typically quantified by hand, but this is extremely tedious. Here, we investigate whether machine learning can be used to improve the speed and accuracy of identification.

Source of Bright Near-Infrared Luminescence in Gold Nanoclusters.

Gold nanoclusters with near-infrared (NIR) photoluminescence (PL) have great potential as sensing and imaging materials in biomedical and bioimaging applications. In this work, Au(SAdm) and AuS(SAdm) are used to unravel the underlying mechanisms for the improved quantum yields (QY), large Stokes shifts, and long PL lifetimes in gold nanoclusters. Both nanoclusters show decent PL QY.

Bright NIR-II Photoluminescence in Rod-Shaped Icosahedral Gold Nanoclusters.

Fluorophores with high quantum yields, extended maximum emission wavelengths, and long photoluminescence (PL) lifetimes are still lacking for sensing and imaging applications in the second near-infrared window (NIR-II). In this work, a series of rod-shaped icosahedral nanoclusters with bright NIR-II PL, quantum yields up to ≈8%, and a peak emission wavelength of 1520 nm are reported. It is found that the bright NIR-II emission arises from a previously ignored state with near-zero oscillator strength in the ground-state geometry and the central Au atom in the nanoclusters suppresses the non-radiative transitions and enhances the overall PL efficiency.

Stress-Induced Structural Transformations in Au Nanocrystals.

Nanocrystals can exist in multiply twinned structures like icosahedron or single crystalline structures like cuboctahedron. Transformations between these structures can proceed through diffusion or displacive motion. Experimental studies on nanocrystal structural transformations have focused on high-temperature diffusion-mediated processes.

Pain phenotypes classified by machine learning using electroencephalography features.

Pain is a multidimensional experience mediated by distributed neural networks in the brain. To study this phenomenon, EEGs were collected from 20 subjects with chronic lumbar radiculopathy, 20 age and gender matched healthy subjects, and 17 subjects with chronic lumbar pain scheduled to receive an implanted spinal cord stimulator. Analysis of power spectral density, coherence, and phase-amplitude coupling using conventional statistics showed that there were no significant differences between the radiculopathy and control groups after correcting for multiple comparisons.

TEM Study of Radiation Resistance of Metallic Glass-Metal Core-Shell Nanocubes.

Radiation damage can cause significantly more surface damage in metallic nanostructures than bulk materials. Structural changes from displacement damage compromise the performance of nanostructures in radiation environments such as nuclear reactors and outer space, or used in radiation therapy for biomedical treatments. As such, it is important to develop strategies to prevent this from occurring if nanostructures are to be incorporated into these applications.

Pressure-Induced Optical Transitions in Metal Nanoclusters.

Currently, a comprehensive understanding of the relationship between atomic structures and optical properties of ultrasmall metal nanoclusters with diameters between 1 and 3 nm is lacking. To address this challenge, it is necessary to develop tools for perturbing the atomic structure and modulating the optical properties of metal nanoclusters beyond what can be achieved using synthetic chemistry. Here, we present a systematic high-pressure study on a series of atomically precise ligand-protected metal nanoclusters.

Hardening in Au-Ag nanoboxes from stacking fault-dislocation interactions.

Porous, nano-architected metals with dimensions down to ~10 nm are predicted to have extraordinarily high strength and stiffness per weight, but have been challenging to fabricate and test experimentally. Here, we use colloidal synthesis to make ~140 nm length and ~15 nm wall thickness hollow Au-Ag nanoboxes with smooth and rough surfaces. In situ scanning electron microscope and transmission electron microscope testing of the smooth and rough nanoboxes show them to yield at 130 ± 45 MPa and 96 ± 31 MPa respectively, with significant strain hardening.

Structural distortion and electron redistribution in dual-emitting gold nanoclusters.

Deciphering the complicated excited-state process is critical for the development of luminescent materials with controllable emissions in different applications. Here we report the emergence of a photo-induced structural distortion accompanied by an electron redistribution in a series of gold nanoclusters. Such unexpected slow process of excited-state transformation results in near-infrared dual emission with extended photoluminescent lifetime.

Nucleation of Dislocations in 3.9 nm Nanocrystals at High Pressure.

As circuitry approaches single nanometer length scales, it has become important to predict the stability of single nanometer-sized metals. The behavior of metals at larger scales can be predicted based on the behavior of dislocations, but it is unclear if dislocations can form and be sustained at single nanometer dimensions. Here, we report the formation of dislocations within individual 3.

Design and synthesis of multigrain nanocrystals via geometric misfit strain.

The impact of topological defects associated with grain boundaries (GB defects) on the electrical, optical, magnetic, mechanical and chemical properties of nanocrystalline materials is well known. However, elucidating this influence experimentally is difficult because grains typically exhibit a large range of sizes, shapes and random relative orientations. Here we demonstrate that precise control of the heteroepitaxy of colloidal polyhedral nanocrystals enables ordered grain growth and can thereby produce material samples with uniform GB defects.

Assessment of axonal recruitment using model-guided preclinical spinal cord stimulation in the ex vivo adult mouse spinal cord.

Spinal cord stimulation (SCS) is used clinically to limit chronic pain, but fundamental questions remain on the identity of axonal populations recruited. We developed an ex vivo adult mouse spinal cord preparation to assess recruitment following delivery of clinically analogous stimuli determined by downscaling a finite element model of clinical SCS. Analogous electric field distributions were generated with 300-µm × 300-µm electrodes positioned 200 µm above the dorsal column (DC) with stimulation between 50 and 200 µA.

Strengthening Mechanism of a Single Precipitate in a Metallic Nanocube.

Nanoprecipitates play a significant role in the strength, ductility, and damage tolerance of metallic alloys through their interaction with crystalline defects, especially dislocations. However, the difficulty of observing the action of individual precipitates during plastic deformation has made it challenging to conclusively determine the mechanisms of the precipitate-defect interaction for a given alloy system and presents a major bottleneck in the rational design of nanostructured alloys. Here, we demonstrate the in situ compression of core-shell nanocubes as a promising platform to determine the precise role of individual precipitates.