Optimizing carbon sources on performance for enhanced efficacy in single-stage aerobic simultaneous nitrogen and phosphorus removal via biofloc technology.

Bioflocs can efficiently achieve simultaneous nitrate and phosphate removal through a single-stage aerobic process, provided they are continuously supplemented with an organic carbon source. This study investigated the effects of different carbon sources on this process. Results revealed that phosphate removal rate in the glucose group was 0.

In Vitro Evaluation of Chito-Oligosaccharides on Disappearance Rate of Nutrients, Rumen Fermentation Parameters, and Micro-Flora of Beef Cattle.

The study aimed to investigate the effect of dietary chitosan oligosaccharides (COS) meal levels on the nutrient disappearance rate, rumen fermentation, and microflora of beef cattle in vitro. A total of 24 fermentation tanks were randomly divided into four treatments containing 0% COS (CON), 0.02% COS, 0.

Performance of feeding black soldier fly (Hermetia illucens) larvae on shrimp carcasses: A green technology for aquaculture waste management and circular economy.

Over 944 thousand tonnes of shrimp carcasses are produced worldwide during the shrimp production cycle, and black soldier fly larvae (BSFL) are a potential solution for this shrimp carcass accumulation. In this study, we evaluated the performance of BSFL feeding on shrimp carcasses. Six combinations of wheat bran and shrimp carcass powder (with replacement increments of 20 %) and one whole shrimp carcasses treatment were tested.

Model-free fast integral terminal sliding-mode control method based on improved fast terminal sliding-mode observer for PMSM with unknown disturbances.

This paper presents a novel model-free fast integral terminal sliding-mode control (MFFITSMC) method based on an improved fast terminal sliding-mode observer (IFTSMO) for permanent magnet synchronous motor (PMSM) drive system, which can effectively eliminate the impact caused by unknown disturbances, such as parameter perturbations and external disturbances. The PMSM mathematical model with unknown disturbances is first established, and the ultra-local model (ULM) of the PMSM speed loop is constructed. Next, the model-free fast integral terminal sliding-mode controller is designed in the speed loop based on the ULM.

Impacts of Nile Tilapia (Oreochromis niloticus) exposed to microplastics in bioflocs system.

Microplastics (MPs) are abundant in aquaculture water, including in bioflocs aquaculture systems. Compared with other aquaculture systems, biofloc technology systems have the richest microbes and are beneficial to cultivated organisms. Therefore, this study provides a comprehensive assessment of the potential effects of MPs on aquaculture organisms in bioflocs systems.

A modification of nested PCR method for detection of (EHP) in giant freshwater prawn .

The microsporidian (EHP) has become a critical threat to the global shrimp aquaculture industry, thus necessitating early detection by screening. Development of a rapid and accurate assay is crucial both for the active surveillance and for the assessment of shrimp with EHP infection. In the present study, a distinct strain of .

Effect of Activation Modes on the Property Characterization of Crumb Rubber Powder from Waste Tires and Performance Analysis of Activated Rubber-Modified Asphalt Binder.

The rubber molecular chain in waste vulcanized tire rubber will be crosslinked to form a network structure that would be difficult to degrade in asphalt. Crumb rubber treated by desulfurization activation could form active groups on the surface by interrupting the crosslinking bond to improve the compatibility between crumb rubber powder and asphalt. To explore the influence of activation modes on crumb rubber powder and the corresponding rubber-modified asphalt binder, crumb rubber powder was firstly activated through three commonly used activation methods and asphalt binder samples modified by activated crumb rubber powder were also prepared.

Effect of Desulfurization Process Variables on the Properties of Crumb Rubber Modified Asphalt.

A large number of waste tires are in urgent need of effective treatment, and breaking waste tires into crumb rubber powder for modifying asphalt has been proved as a good idea to solve waste tires. Crumb rubber modified asphalt not only has good high and low temperature performance, durability, and aging resistance but can also reduce pavement noise and diseases, which has wide application prospects. In this study, crumb rubber powder was desulfurized by mechanochemical method to prepare desulfurized crumb rubber modified asphalt.

Cationic Amphiphilic Dendrons with Anticancer Activity.

Cancer has become the leading cause of human death worldwide, and there is an urgent need to design and develop new oncology drugs. In this study, we report series of cationic amphiphilic dendrons with different hydrophobic alkyl chains (C) and different generations (G) and demonstrate their use for anticancer applications. The results revealed that lower-generation dendrons (G) with a longer hydrophobic alkyl chain (C and C) have stronger antitumor activity.

Performance of a recirculating aquaculture system using biofloc biofilters with convertible water-treatment efficiencies.

To achieve high water-treatment efficiencies and simplify the setup of recirculating aquaculture systems (RAS), this study examined the use of suspended growth reactors (R1 and R2) based on biofloc technology (BFT) as water-treatment biofilters. Moreover, the conversion of the heterotrophic R1 biofilter to a nitrifying role was investigated. During RAS operation using heterotrophic BFT biofilters, R1 and R2 simultaneously controlled total ammonium nitrogen, nitrite (NO-N), nitrate (NO-N), soluble reactive phosphate (SRP), and alkalinity, with relevant functional microbes including denitrifying bacteria (DNB), phosphorus accumulating organisms (PAOs), denitrifying PAOs (DNPAOs), glycogen accumulating organisms, ammonia oxidizing bacteria, and nitrite oxidizing bacteria.

Enhancement of Anaerobic Digestion to Treat Saline Sludge from Recirculating Aquaculture Systems.

The effectiveness of carbohydrate addition and the use of ultrasonication as a pretreatment for the mesophilic anaerobic digestion of saline aquacultural sludge was assessed. Analyses were conducted using an anaerobic sequencing batch reactor (ASBR), which included stopped gas production attributed to the saline inhibition. After increasing the C : N ratio, gas production was observed, and the total chemical oxygen demand (TCOD) removal efficiency increased from 75% to 80%.

[Comporison Sduty of Microstructure by Metallographicalk on the Polarized Light and Texture by XRD of CC 5083 and CC 5182 Aluminium Alloy after Cold Rolling and Recrystallization].

At present the study of relation between microstructure, texture and performance of CC 5083 aluminium alloy after cold tolling and recrystallization processes is still finitude. So that the use of the CC 5083 aluminium alloy be influenced. Be cased into electrical furnace, hot up with unlimited speed followed the furnace hot up to different temperature and annealed 2h respectively, and be cased into salt-beth furnace, hot up quickly to different temperature and annealed 30 min respectively for CC 5083 and CC 5182 aluminum alloy after cold roling with 91.

[Comparison of texture distribution of cold rolled DC and CC AA 5052 aluminum alloy at different positions through thickness direction by XRD].

To provide gist of DC AA 5052 and CC AA 5052 aluminum alloy to industry production and application, the texture variation of cold rolled sheets through thickness direction was studied by X-ray diffraction method, and the difference in texture at surface, quarter and center layer was analyzed. The hot plates of direct chill cast (DC) AA 5052 and continuous cast (CC) AA 5052 aluminum alloy were annealed at 454 degrees C for 4 hours and then cold rolled to different reductions. The strength and volume fraction of the fiber in CC AA 5052 aluminum alloy is larger than in DC AA 5052 aluminum alloy after same rolling reduction The volume fraction of the recrystallization texture cube in the CC AA 5052 aluminum alloy is less than in the DC AA 5052 aluminum alloy, which result in that CC AA 5052 aluminum alloy needs less cold rolling reduction than DC AA 5052 aluminum alloy for generating the texture with same intensity and volume fraction at surface layer, quarter layer and center layer.

[Texture variation of CC 5052 aluminum alloy slab from surface to center layer by XRD].

For improvement of the processing and gaining uniformity texture structure and performance of direct chill cast CCAA 5052 aluminum alloy band after first hot rolling with different reduction, the material was annealed at 454 degrees C and then cold rolling with different reduction was conducted, the texture at surface, quarter and center layer of the sample was tested and examined by X-ray diffraction method, the data calculated using special software and the difference of texture at surface, quarter and center layer was analyzed. There existed an elevated gradient of intensity from surface layer to center layer after cold rolled with less than or equal to 40% reduction, The main texture of beta is stronger mainly due to transformation from remainder exposure, while the goss and remainder is infirm, the state of texture at each layer is close to each other after cold rolling with reduction high than 56.1%.

[Texture variation of DCAA 5052 aluminum alloy slab at difference position through thickness by XRD].

For improvement the processing and gaining uniformity texture structure and performance the thickness direction of direct chill cast DCAA 5052 aluminum alloy band after first hot rolling with different reduction, the material was annealed at 454 degrees C and then cold rolling with different reduction, we test and examined the texture at surface, quarter and center layer of the sample by use X-ray diffraction method, we calculated the data by use special software and analyses the difference texture at surface, quarter and center layer. The intension gradient of beta texture was along the direction from surface to center layer gradually enhance at different reduction sample. For beta texture, the intension gradient was along the direction from surface to center layer gradually reduce, the volume fraction gradually augment and the intensity gradually were almost equal with the cold rolling reduction increased from 0% to 90%.

[Study on biological characteristics and relative yield of Ophiopogon japonicus].

Objective: To study the biological characteristics and the relative yield of Ophiopgon japonicus.

Method: The observation of the selected plants nad determination of the selected samples.

Result: The yield of O.