Colloidal assembly route for responsive colloidosomes with tunable permeability.

We present a robust and straightforward approach for fabricating a novel colloidosome system where colloidal particles are assembled to form colloidal shells on the surface of stimuli-responsive microgel scaffolds. We demonstrate that the structural properties of the colloidal shells can be controlled through the colloidal particle size and modulus, and the state of supporting microgel particles. This technique offers a new way to engineer colloidosomes, enabling fine control over their permeability over a wide range of length scales.

Target-locking acquisition with real-time confocal (TARC) microscopy.

We present a real-time target-locking confocal microscope that follows an object moving along an arbitrary path, even as it simultaneously changes its shape, size and orientation. This Target-locking Acquisition with Realtime Confocal (TARC) microscopy system integrates fast image processing and rapid image acquisition using a Nipkow spinning-disk confocal microscope. The system acquires a 3D stack of images, performs a full structural analysis to locate a feature of interest, moves the sample in response, and then collects the next 3D image stack.

Bending dynamics of fluctuating biopolymers probed by automated high-resolution filament tracking.

Microscope images of fluctuating biopolymers contain a wealth of information about their underlying mechanics and dynamics. However, successful extraction of this information requires precise localization of filament position and shape from thousands of noisy images. Here, we present careful measurements of the bending dynamics of filamentous (F-)actin and microtubules at thermal equilibrium with high spatial and temporal resolution using a new, simple but robust, automated image analysis algorithm with subpixel accuracy.

Topological changes in bipolar nematic droplets under flow.

Bipolar liquid crystal drops moving inside microchannels exhibit periodic director field transformations due to induced circulating flows inside them. These modifications are characterized by changes in the type of point surface disclinations; they periodically change from splay to bend disclinations, implying the drop changes between bipolar and escaped concentric configurations. Upon stopping the flow, this structure does not relax to the lower energy bipolar configuration; we argue this is due to drop flattening inside the channels.

A new microrheometric approach reveals individual and cooperative roles for TGF-beta1 and IL-1beta in fibroblast-mediated stiffening of collagen gels.

The stiffness of the extracellular matrix can profoundly influence cell and tissue behaviors. Thus there is an emerging emphasis on understanding how matrix mechanical environments are established, regulated, and modified. Here we develop a microrheometric assay to measure the mechanical properties of a model extracellular matrix (type I collagen gel) and use it to explore cytokine-induced, cell-mediated changes in matrix mechanical properties.

Contribution of slow clusters to the bulk elasticity near the colloidal glass transition.

We use confocal microscopy to visualize individual particles near the colloidal glass transition. We identify the most slowly-relaxing particles and show that they form spatially correlated clusters that percolate across the sample. In supercooled fluids, the largest cluster spans the system on short time scales but breaks up on longer time scales.

Mechanism for clogging of microchannels.

We investigate clogging of microchannels at the single-pore level using microfluidic devices as model porous media. The process of clogging is studied at low volume fractions and high flow rates, a technologically important regime. We show that clogging is independent of particle flow rate and volume fraction, indicating that collective effects do not play an important role.

The cell as a material.

To elucidate the dynamic and functional role of a cell within the tissue it belongs to, it is essential to understand its material properties. The cell is a viscoelastic material with highly unusual properties. Measurements of the mechanical behavior of cells are beginning to probe the contribution of constituent components to cell mechanics.

Functional and structural characterization of a prokaryotic peptide transporter with features similar to mammalian PEPT1.

The ydgR gene of Escherichia coli encodes a protein of the proton-dependent oligopeptide transporter (POT) family. We cloned YdgR and overexpressed the His-tagged fusion protein in E. coli BL21 cells.

Slip, yield, and bands in colloidal crystals under oscillatory shear.

We study dense colloidal crystals under oscillatory shear using a confocal microscope. At large strains the crystals yield and the suspensions form shear bands. The pure harmonic response exhibited by the suspension rules out the applicability of nonlinear rheology models typically used to describe shear banding in other types of complex fluids.

Synthesis of nonspherical colloidal particles with anisotropic properties.

We describe a promising and flexible technique for fabricating uniform nonspherical particles with anisotropic phase and surface properties. Our approach is based on the seeded polymerization technique in which monomer-swollen particles are polymerized. The polymerization causes a phase separation to occur, giving rise to two-phase nonspherical particles.

Microfluidic assembly of homogeneous and Janus colloid-filled hydrogel granules.

The microfluidic assembly of colloid-filled hydrogel granules of varying shape and composition is described. First, drops are formed by shearing a concentrated colloidal microsphere-acrylamide suspension in a continuous oil phase using a sheath-flow device. Both homogeneous and Janus (hemispherically distinct) spheres and disks are produced by confining the assembled drops in microchannels of varying geometry.

Direct imaging of repulsive and attractive colloidal glasses.

Coherent anti-Stokes Raman scattering microscopy is performed on glassy systems of poly(methylmethacrylate) colloidal particles in density- and refractive-index-matched solvents. Samples are prepared with varying amounts of linear polystyrene, which induces a depletion driven attraction between the nearly hard-sphere particles. Images collected over several hours confirm the existence of a reentrant glass transition.

Dynamics of fracture in drying suspensions.

We investigate the dynamics of fracture in drying films of colloidal silica. Water loss quenches the nanoparticle dispersions to form a liquid-saturated elastic network of particles that relieves drying-induced strain by cracking. These cracks display intriguing intermittent motion originating from the deformation of arrested crack tips and aging of the elastic network.

Weak correlations between local density and dynamics near the glass transition.

We perform experiments on two different dense colloidal suspensions with confocal microscopy to probe the relationship between local structure and dynamics near the glass transition. We calculate the Voronoi volume for our particles and show that this quantity is not a universal probe of glassy structure for all colloidal suspensions. We correlate the Voronoi volume to displacement and find that these quantities are only weakly correlated.

Fast and slow dynamics of the cytoskeleton.

Material moduli of the cytoskeleton (CSK) influence a wide range of cell functions. There is substantial evidence from reconstituted F-actin gels that a regime exists in which the moduli scale with frequency with a universal exponent of 3/4. Such behaviour is entropic in origin and is attributable to fluctuations in semiflexible polymers driven by thermal forces, but it is not obvious a priori that such entropic effects are responsible for the elasticity of the CSK.

Irreversible shear-activated aggregation in non-Brownian suspensions.

We have studied the effect of shear on the stability of suspensions made of non-Brownian solid particles. We demonstrate the existence of an irreversible transition where the solid particles aggregate at remarkably low volume fractions (phi approximately 0.1).

Buckling and crumpling of drying droplets of colloid-polymer suspensions.

Spray drying of complex liquids to form solid powders is important in many industrial applications. One of the challenges associated with spray drying is controlling the morphologies of the powders produced; this requires an understanding of how drying mechanics depend on the ingredients and conditions. We demonstrate that the morphology of powders produced by spray drying colloidal polystyrene (PS) suspensions can be significantly altered by changing the molecular weight of dissolved poly(ethylene oxide) (PEO).

Microtubules can bear enhanced compressive loads in living cells because of lateral reinforcement.

Cytoskeletal microtubules have been proposed to influence cell shape and mechanics based on their ability to resist large-scale compressive forces exerted by the surrounding contractile cytoskeleton. Consistent with this, cytoplasmic microtubules are often highly curved and appear buckled because of compressive loads. However, the results of in vitro studies suggest that microtubules should buckle at much larger length scales, withstanding only exceedingly small compressive forces.

Microscopic structure and elasticity of weakly aggregated colloidal gels.

We directly probe the microscopic structure, connectivity, and elasticity of colloidal gels using confocal microscopy. We show that the gel is a random network of one-dimensional chains of particles. By measuring thermal fluctuations, we determine the effective spring constant between pairs of particles as a function of separation; this is in agreement with the theory for fractal chains.

Dewetting instability during the formation of polymersomes from block-copolymer-stabilized double emulsions.

We investigate the formation of polymer vesicles, or polymersomes, of polystyrene-block-poly(ethylene oxide) diblock copolymers using double emulsion droplets of controlled architecture as templates. To engineer the structure of the polymersomes, it is important to consider the concentration of diblock copolymer in the middle phase of the double emulsion. We describe how the presence of excess polymer can induce a transition from complete wetting to partial wetting of the middle phase, resulting in polymer shells with inhomogeneous thicknesses.

Stress-dependent elasticity of composite actin networks as a model for cell behavior.

Networks of filamentous actin cross-linked with the actin-binding protein filamin A exhibit remarkable strain stiffening leading to an increase in differential elastic modulus by several orders of magnitude over the linear value. The variation of the frequency dependence of the differential elastic and loss moduli as a function of prestress is consistent with that observed in living cells, suggesting that cell elasticity is always measured in the nonlinear regime, and that prestress is an essential control parameter.

Microrheology probes length scale dependent rheology.

We exploit the power of microrheology to measure the viscoelasticity of entangled F-actin solutions at different length scales from 1 to 100 microm over a wide frequency range. We compare the behavior of single probe-particle motion to that of the correlated motion of two particles. By varying the average length of the filaments, we identify fluctuations that dissipate diffusively over the filament length.