Highly Dispersed Ag Nanocrystals Anchored on N-Doped Holey Carbon Aerogel as High-Mass-Loading Electrode for Cl Capture in Hybrid Capacitive Deionization.

Nanostructured Faradaic materials show extraordinary promise for capacitive deionization (CDI) toward the relief of global freshwater scarcity. But at present, there exist at least two shortages for the development of CDI electrode materials. In laboratory studies, evaluating their desalination performance is usually based on low mass loadings (<1 mg cm), which is far behind the practical demand for fabricating high-mass-loading CDI electrodes or devices.

Targeting Bacteria-Induced Ferroptosis of Bone Marrow Mesenchymal Stem Cells to Promote the Repair of Infected Bone Defects.

The specific mechanisms underlying bacteria-triggered cell death and osteogenic dysfunction in host bone marrow mesenchymal stem cells (BMSCs) remain unclear, posing a significant challenge to the repair of infected bone defects. This study identifies ferroptosis as the predominant cause of BMSCs death in the infected bone microenvironment. Mechanistically, the bacteria-induced activation of the innate immune response in BMSCs leads to upregulation and phosphorylation of interferon regulatory factor 7 (IRF7), thus facilitating IRF7-dependent ferroptosis of BMSCs through the transcriptional upregulation of acyl-coenzyme A synthetase long-chain family member 4 (ACSL4).

The Simpler the Better: Ultrafast Air-Plasma Synthesis of 3D Crosslinked Graphene Nanoscroll-Nanosheet Aerogels at Room Temperature for Capacitive Deionization.

Graphene nanoscroll (GNS) is an important 1D tubular form of graphene-derivative materials, which has garnered widely attention. However, conventional fabrication methods commonly suffer from complex processing and time-consuming. Herein, with graphene oxide (GO) as a precursor, the study puts forward a facile air-plasma synthesis strategy to fabricate 3D graphene nanoscroll-nanosheet aerogels (GSSA).

Effects of moxibustion on intestinal barrier function and TLR4/NF-κB p65 signaling pathway in obese rats.

Objectives: To observe the effects of moxibustion on intestinal barrier function and Toll-like receptor 4 (TLR4)/nuclear factor-κB p65 (NF-κB p65) signaling pathway in obese rats and explore the mechanism of moxibustion in the intervention of obesity.

Methods: Fifty-five Wistar rats of SPF grade were randomly divided into a normal group (10 rats) and a modeling group (45 rats). In the modeling group, the obesity model was established by feeding high-fat diet.

Constructing CoNi-LDH/Fe MOF/NF Heterostructure Catalyst for Energy-Efficient OER and UOR at High Current Density.

The sluggish kinetics of the oxygen evolution reaction (OER) always results in a high overpotential at the anode of water electrolysis and an excessive electric energy consumption, which has been a major obstacle for hydrogen production through water electrolysis. In this study, we present a CoNi-LDH/Fe MOF/NF heterostructure catalyst with nanoneedle array morphology for the OER. In 1.

Nomogram for predicting venous thromboembolism after spinal surgery.

Purpose: This study aimed to establish a nomogram to predict the risk of venous thromboembolism (VTE), identifying potential risk factors, and providing theoretical basis for prevention of VTE after spinal surgery.

Methods: A retrospective analysis was conducted on 2754 patients who underwent spinal surgery. The general characteristics of the training group were initially screened using univariate logistic analysis, and the LASSO method was used for optimal prediction.

Biomechanical evaluation of different posterior fixation techniques for treating thoracolumbar burst fractures of osteoporosis old patients: a finite element analysis.

To investigate the biomechanical characteristics of different posterior fixation techniques in treatment of osteoporotic thoracolumbar burst fractures by finite element analysis. The Dicom format images of T10-L5 segments were obtained from CT scanning of a volunteer, and transferred to the Geomagic Studio software, which was used to build digital models. L1 osteoporotic burst fracture and different posterior fixation techniques were simulated by SolidWorks software.

Photocurable 3D-printed PMBG/TCP biphasic scaffold mimicking vasculature for bone regeneration.

Mesoporous bioglass (MBG) with excellent osteointegration, osteoinduction, and biodegradability is a promising material for bone regeneration. However, its clinical application is hindered by complex processing and a lack of personalization, low mechanical strength, and uncontrollable degradation rate. In this study, we developed a double-bond-functionalized photocurable mesoporous bioglass (PMBG) sol that enabled ultrafast photopolymerization within 5 s.

Photocurable 3D-Printed PMBG/TCP Scaffold Coordinated with PTH (1-34) Bidirectionally Regulates Bone Homeostasis to Accelerate Bone Regeneration.

Bone defect repair remains a major clinical challenge that requires the construction of scaffolds that can regulate bone homeostasis. In this study, a photo-cured mesoporous bioactive glass (PMBG) precursor is developed as a tricalcium phosphate (TCP) agglomerant to obtain a double-phase PMBG/TCP scaffold via 3D printing. The scaffold exhibits multi-scale porous structures and large surface areas, making it a suitable carrier for the loading of parathyroid hormone (PTH) (1-34), which is used for the treatment of osteoporosis.

3D bioprinting tumor models mimic the tumor microenvironment for drug screening.

Cancer is a severe threat to human life and health and represents the main cause of death globally. Drug therapy is one of the primary means of treating cancer; however, most anticancer medications do not proceed beyond preclinical testing because the conditions of actual human tumors are not effectively mimicked by traditional tumor models. Hence, bionic tumor models must be developed to screen for anticancer drugs.

Complete uni-port video-assisted thoracoscopic surgery for surgical stabilization of rib fractures: a case report.

Background: Rib fractures are a common injury in trauma. Potential complications include pain, pneumonia, respiratory failure, disability, and death. Surgical stabilization of rib fractures (SSRF) has become an available treatment option, and complete video-assisted thoracoscopic surgery (VATS) for SSRF is gradually accepted because of minimally invasive and pain relief.

Dual-Nozzle 3D Printed Nano-Hydroxyapatite Scaffold Loaded with Vancomycin Sustained-Release Microspheres for Enhancing Bone Regeneration.

Background: Successful treatment of infectious bone defect remains a major challenge in the orthopaedic field. At present, the conventional treatment for infectious bone defects is surgical debridement and long-term systemic antibiotic use. It is necessary to develop a new strategy to achieve effective bone regeneration and local anti-infection for infectious bone defects.

Ultrahigh Content Boron and Nitrogen Codoped Hierarchically Porous Carbon Obtained from Biomass Byproduct Okara for Capacitive Deionization.

Capacitive deionization (CDI) is an environmentally friendly, energy efficient, and low cost water purification technique in comparison with other conventional techniques, and it has attracted considerable attention in recent years. Here, we use biomass byproduct okara as the starting material to fabricate a boron and nitrogen codoped hierarchically porous carbon (BNC) with ultrahigh heteroatom contents and abundant in-plane nanoholes for CDI application. With the interconnected hierarchical porous structure, the BNC not only exhibits a large surface area (647.

Thermosensitive hydrogel loaded with concentrated growth factors promote bone repair in segmental bone defects.

Treating critical-size bone defects beyond the body's self-healing capacity is a challenging clinical task. In this study, we investigate the effect of concentrate growth factors (CGFs) loaded Poloxamer 407 hydrogel on the viability and osteogenic differentiation potential of bone marrow mesenchymal stem cells (BMSCs) and reconstruction of critical-size bone defects. , this CGFs-loaded thermosensitive hydrogel can significantly promote proliferation, maintain cell viability, and induce osteogenic differentiation of BMSCs by up-regulating the mineralization and alkaline phosphatase (ALP) activity, as well as gene markers, including runt-related transcription factor-2 (), type I collagen (), osteocalcin (), as well as osteopontin ().

The complete chloroplast genome sequences of three Broussonetia species and comparative analysis within the Moraceae.

Background: Species of (family Moraceae) are commonly used to make textiles and high-grade paper. The distribution of L. is considered to be related to the spread and location of humans.

Retropharyngeal Reduction Plate for Atlantoaxial Dislocation: A Cadaveric Test and Morphometric Trajectory Analysis.

Objective: To evaluate the placement feasibility and safety of the newly designed retropharyngeal reduction plate by cadaveric test and to perform morphometric trajectory analysis.

Methods: The five cadaveric specimens with intact atlantoaxial joint were enrolled in this study. They were used for simulating the placement process and evaluating the placement feasibility of the retropharyngeal reduction plate.

Identification and complete genome sequence of mulberry cryptic virus 1.

A cryptic virus, named mulberry cryptic virus 1 (MuCV1), was identified in a mulberry (Morus alba) transcriptome dataset and confirmed using RACE methods. The genome of MuCV1 is composed of two double-stranded RNAs, 1605 bp and 1627 bp in size, encoding an RNA-dependent RNA polymerase (RdRp) and a coat protein (CP), respectively. The 5'-AGAAUU-3' sequence in the 5' untranslated region was conserved in the two dsRNAs.

Wood Ionic Cable.

The combination of good stability, biocompatibility, and high mechanical strength is attractive for bio-related material applications, but it remains challenging to simultaneously achieve these properties in a single, ionically conductive material. Here a "wood" ionic cable, made of aligned wood nanofibrils, demonstrating a combination of biocompatibility, high mechanical strength, high ionic conductivity, and excellent stability is reported. The wood ionic cable possesses excellent flexibility and exhibits high tensile strength up to 260 MPa (in the dry state) and ≈80 MPa (in the wet state).

Scalable Wood Hydrogel Membrane with Nanoscale Channels.

Many efforts have been dedicated to exploring nanofluidic systems for various applications including water purification and energy generation. However, creating robust nanofluidic materials with tunable channel orientations and numerous nanochannels or nanopores on a large scale remains challenging. Here, we demonstrate a scalable and cost-effective method to fabricate a robust and highly conductive nanofluidic wood hydrogel membrane in which ions can transport across the membrane.

Preparation of Xylan--/P(AA--AM)/GO Nanocomposite Hydrogel and its Adsorption for Heavy Metal Ions.

Xylan--/P(AA--AM)/Graphene oxide (GO) hydrogels were prepared and used in the removal of heavy mental ions. Acrylamide (AM), acrylic acid (AA), and xylan were used as the raw materials to prepare the hydrogels with ammonium persulfate (APS) as the initiator. The prepared hydrogels were characterized by Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and energy dispersive X-ray (EDX).

Fly-through synthesis of nanoparticles on textile and paper substrates.

The fast and efficient synthesis of nanoparticles on flexible and lightweight substrates is increasingly critical for various medical and wearable applications. However, conventional high temperature (high-T) processes for nanoparticle synthesis are intrinsically incompatible with temperature-sensitive substrates, including textiles and paper (i.e.