Publications by authors named "Weimann T"

Due to their ultra-high sensitivity, solution-gated graphene-based field-effect transistors (SG-GFET) have been proposed for applications in bio-sensing. However, challenges regarding the functionalization of GFETs have prevented their applications in clinical diagnostics so far. Here GFET sensors based on van der Waals (vdW) heterostructures of single-layer graphene layered with a molecular ≈1 nm thick carbon nanomembrane (CNM) are presented.

View Article and Find Full Text PDF

In the realm of modern healthcare, digital health solutions are poised to transform patient care, particularly in surgical interventions such as Total Hip Arthroplasty. Through a scoping review of 40 studies, this paper identifies six categories of digital interventions tailored for pre- and post-operative care in THA, spanning (Tele-)Rehabilitation, (Tele-)Monitoring and -Communication, Mobile Applications and Patient Portals, Digital Patient Assessment and Outcome Measurement, as well as Biomechanics and Robotics. These solutions, ranging from AI-driven communication tools to weight-shifting robot control systems, promise a more patient-centered, efficient, and accessible healthcare model.

View Article and Find Full Text PDF

Older individuals often face disabilities or diseases that lower their quality of life (QoL). While inpatient rehabilitation can initially enhance QoL, there is often a lack of continuation at home. Virtual coaches (VCs) as specific embodied conversational agents promise appropriate support for home rehabilitation.

View Article and Find Full Text PDF

We report the levitation of a superconducting lead-tin sphere with 100  μm diameter (corresponding to a mass of 5.6  μg) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 Hz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well as optically and exhibits quality factors of up to 2.

View Article and Find Full Text PDF

A critical point drying (CPD) technique is reported with supercritical CO as a cleaning step for graphene field-effect transistors (GFETs) microfabricated on oxidized Si wafers, which results in an increase of the field-effect mobility and a decrease of the impurity doping. It is shown that the polymeric residues remaining on graphene after the transfer process and device microfabrication are significantly reduced after the CPD treatment. Moreover, the CPD effectively removes ambient adsorbates such as water therewith reducing the undesirable p-type doping of the GFETs.

View Article and Find Full Text PDF

The nonlinear response of a beam splitter to the coincident arrival of interacting particles enables numerous applications in quantum engineering and metrology. Yet, it poses considerable challenges to control interactions on the individual particle level. Here, we probe the coincidence correlations at a mesoscopic constriction between individual ballistic electrons in a system with unscreened Coulomb interactions and introduce concepts to quantify the associated parametric nonlinearity.

View Article and Find Full Text PDF

A reliable and quantitative material analysis is crucial for assessing new technological processes, especially to facilitate a quantitative understanding of advanced material properties at the nanoscale. To this end, X-ray fluorescence microscopy techniques can offer an element-sensitive and non-destructive tool for the investigation of a wide range of nanotechnological materials. Since X-ray radiation provides information depths of up to the microscale, even stratified or buried arrangements are easily accessible without invasive sample preparation.

View Article and Find Full Text PDF

Introduction: Remote delivery of behavioral and lifestyle interventions has shown a great potential for achieving weight loss comparable to in-person treatment. However, little is known about its effects on adherence and efficacy in a real-world setting. During the COVID-19 pandemic, our usual care, a 12-month treatment program for morbid obesity, had to be transitioned to remote delivery.

View Article and Find Full Text PDF

Artificial photosynthesis for hydrogen production is an important element in the search for green energy sources. The incorporation of photoactive units into mechanically stable 2D materials paves the way toward the realization of ultrathin membranes as mimics for leaves. Here we present and compare two concepts to introduce a photoactive Ru polypyridine complex into ≈1 nm thick carbon nanomembranes (CNMs) generated by low-energy electron irradiation induced cross-linking of aromatic self-assembled monolayers.

View Article and Find Full Text PDF

The rapid development of display technologies has raised interest in arrays of self-emitting, individually controlled light sources atthe microscale. Gallium nitride (GaN) micro-light-emitting diode (LED) technology meets this demand. However, the current technology is not suitable for the fabrication of arrays of submicron light sources that can be controlled individually.

View Article and Find Full Text PDF

We present a fabrication technology for nanoscale superconducting quantum interference devices (SQUIDs) with overdamped superconductor-normal metal-superconductor (SNS) trilayer Nb/HfTi/Nb Josephson junctions. A combination of electron-beam lithography with chemical-mechanical polishing and magnetron sputtering on thermally oxidized Si wafers is used to produce direct current SQUIDs with 100-nm-lateral dimensions for Nb lines and junctions. We extended the process from originally two to three independent Nb layers.

View Article and Find Full Text PDF

The increasing importance of well-controlled ordered nanostructures on surfaces represents a challenge for existing metrology techniques. To develop such nanostructures and monitor complex processing constraints fabrication, both a dimensional reconstruction of nanostructures and a characterization (ideally a quantitative characterization) of their composition is required. In this work, we present a soft x-ray fluorescence-based methodology that allows both of these requirements to be addressed at the same time.

View Article and Find Full Text PDF

We demonstrate the trapping of electrons propagating ballistically at far-above-equilibrium energies in GaAs/AlGaAs heterostructures in high magnetic field. We find low-loss transport along a gate-modified mesa edge in contrast to an effective decay of excess energy for the loop around a neighboring, mesa-confined node, enabling high-fidelity trapping. Measuring the full counting statistics via single-charge detection yields the trapping (and escape) probabilities of electrons scattered (and excited) within the node.

View Article and Find Full Text PDF

Field effect transistors (FETs) based on 2D materials are of great interest for applications in ultrathin electronic and sensing devices. Here we demonstrate the possibility to add optical switchability to graphene FETs (GFET) by functionalizing the graphene channel with optically switchable azobenzene molecules. The azobenzene molecules were incorporated to the GFET channel by building a van der Waals heterostructure with a carbon nanomembrane (CNM), which is used as a molecular interposer to attach the azobenzene molecules.

View Article and Find Full Text PDF

We present a method for a bottom-up synthesis of atomically thin graphene sheets with tunable crystallinity and porosity using aromatic self-assembled monolayers (SAMs) as molecular precursors. To this end, we employ SAMs with pyridine and pyrrole constituents on polycrystalline copper foils and convert them initially into molecular nanosheets-carbon nanomembranes (CNMs)- via low-energy electron irradiation induced cross-linking and then into graphene monolayers via pyrolysis. As the nitrogen atoms are leaving the nanosheets during pyrolysis, nanopores are generated in the formed single-layer graphene.

View Article and Find Full Text PDF

We report on the fabrication of large-area all-carbon capacitors (ACCs) composed of multilayer stacks of carbon nanomembranes as dielectrics sandwiched between two carbon-based conducting electrodes. Carbon nanomembranes (CNMs) are prepared from aromatic self-assembled monolayers of phenylthiol homologues via electron irradiation. Two types of carbon-based electrode materials, (1) trilayer graphene made by chemical vapor deposition and mechanical stacking and (2) pyrolyzed graphitic carbon made by pyrolysis of cross-linked aromatic molecules, have been employed for this study.

View Article and Find Full Text PDF

Management of patients with metastatic squamous cell skin cancer, refractory to initial therapy with standard chemotherapy and radiation protocols, remains difficult with poor overall prognosis and limited therapeutic options. Recently, promising response rates with nivolumab, a programmed death receptor-1-blocking antibody, in squamous cancer of the head and neck have been demonstrated. Considering the similar histological patterns of squamous cell cancer of the skin and squamous cell cancer of the head and neck, we assumed that nivolumab could also be effective in our patients with refractory metastatic squamous cell cancer of the skin.

View Article and Find Full Text PDF

We present a method to fabricate nanometer scale gaps within InAs nanowires by selectively etching InAs/InP heterostructure nanowires. We used vapor-liquid-solid grown InAs nanowires with embedded InP segments of 10-60 nm length and developed an etching recipe to selectively remove the InP segment. A photo-assisted wet etching process in a mixture of acetic acid and hydrobromic acid gave high selectivity, with accurate removal of InP segments down to 20 nm, leaving the InAs wire largely unattacked, as verified using scanning electron and transmission electron microscopy.

View Article and Find Full Text PDF

The future redefinition of the international system of units in terms of natural constants requires a robust, high-precision quantum standard for the electrical base unit ampere. However, the reliability of any single-electron current source generating a nominally quantized output current I=ef by delivering single electrons with charge e at a frequency f is eventually limited by the stochastic nature of the underlying quantum mechanical tunneling process. We experimentally explore a path to overcome this fundamental limitation by serially connecting clocked single-electron emitters with multiple in situ single-electron detectors.

View Article and Find Full Text PDF

Non-destructive chemical functionalization of graphene for applications in electronic devices (e.g., sensors or transducers) is achieved via assembly of carbon nanomembrane (CNM)/single-layer graphene (SLG) van der Waals heterostructures.

View Article and Find Full Text PDF

Measurements performed on superconductive networks shaped in the form of planar graphs display anomalously large currents when specific branches are biased. The temperature dependences of these currents evidence that their origin is due to Cooper pair hopping through the Josephson junctions connecting the superconductive islands of the array. The experimental data are discussed in terms of theoretical models which predict, for the system under consideration, an inhomogeneous Cooper pair distribution on the superconductive islands of the network as a consequence of a Bose-Einstein condensation phenomenon.

View Article and Find Full Text PDF

Using an optimally coupled nanometer-scale SQUID, we measure the magnetic flux originating from an individual ferromagnetic Ni nanotube attached to a Si cantilever. At the same time, we detect the nanotube's volume magnetization using torque magnetometry. We observe both the predicted reversible and irreversible reversal processes.

View Article and Find Full Text PDF

Self-assembled monolayers of aromatic molecules on copper substrates can be converted into high-quality single-layer graphene using low-energy electron irradiation and subsequent annealing. This two-dimensional solid state transformation is characterized on the atomic scale and the physical and chemical properties of the formed graphene sheets are studied by complementary microscopic and spectroscopic techniques and by electrical transport measurements. As substrates, Cu(111) single crystals and the technologically relevant polycrystalline copper foils are successfully used.

View Article and Find Full Text PDF

We have investigated the electronic transport through 3 μm long, 45 nm diameter InAs nanowires comprising a 5 nm long InP segment as electronic barrier. After assembly of 12 nm long oligo(phenylene vinylene) derivative molecules onto these InAs/InP nanowires, we observed a pronounced, nonlinear I-V characteristic with significantly increased currents of up to 1 μA at 1 V bias, for a back-gate voltage of 3 V. As supported by our model calculations based on a nonequilibrium Green Function approach, we attribute this effect to charge transport through those surface-bound molecules, which electrically bridge both InAs regions across the embedded InP barrier.

View Article and Find Full Text PDF

We report noninvasive single-charge detection of the full probability distribution P(n) of the initialization of a quantum dot with n electrons for rapid decoupling from an electron reservoir. We analyze the data in the context of a model for sequential tunneling pinch-off, which has generic solutions corresponding to two opposing mechanisms. One limit considers sequential "freeze-out" of an adiabatically evolving grand canonical distribution, the other one is an athermal limit equivalent to the solution of a generalized decay cascade model.

View Article and Find Full Text PDF