Inclusion of Glenoid Anteversion Provides a More Accurate Assessment of Glenoid Stability Using a Measuring Protocol for the Modified Bony Shoulder Stability Ratio.

Purpose: To clarify whether there is a disparity between the conventional bony shoulder stability ratio (cBSSR) calculated using the method of Moroder et al. and the stability ratio (SR) obtained biomechanically and whether the modified bony shoulder stability ratio (mBSSR) calculated using the modified method, adjusted for glenoid anteversion, shows good consistency with the biomechanically determined SR.

Methods: Forty-two glenoid models were successively constructed from seven cadaveric scapular bones, each with varying degrees of bone defect (intact condition and 2-, 4-, 6-, 8-, and 10-mm defects).

Recurrent neural network for trajectory tracking control of manipulator with unknown mass matrix.

Real-world robotic operations often face uncertainties that can impede accurate control of manipulators. This study proposes a recurrent neural network (RNN) combining kinematic and dynamic models to address this issue. Assuming an unknown mass matrix, the proposed method enables effective trajectory tracking for manipulators.

Arthroscopic suture anchor fixation results in similar clinical outcomes, less range of motion limitation, but poorer quality of reduction compared to open screw fixation for acute large anterior glenoid rim fractures.

Background: The purpose of the present study was to retrospectively compare the clinical and radiologic outcomes of arthroscopic suture anchor fixation and open screw fixation for acute large anterior glenoid rim fractures.

Methods: This study enrolled patients with acute large anterior glenoid rim fractures treated with arthroscopic suture anchor fixation (group A) or open screw fixation (group O) from January 2013 to June 2020 with a minimum follow-up of＞2 years. The Subjective Shoulder Value, American Shoulder and Elbow Surgeons score, Rowe score, Constant score, range of motion, recurrent instability rate, and complications were recorded as clinical results.

Arthroscopic Autologous Iliac Crest Grafting With an Adjustable-Loop Suspensory Device Yields Favorable Outcomes for Anterior Shoulder Instability With Glenoid Defects.

Purpose: To evaluate the clinical and radiologic outcomes of the arthroscopic autologous iliac crest grafting (AICG) procedure with an adjustable-loop suspensory fixation device in the treatment of anterior shoulder instability with glenoid bone defects.

Methods: A retrospective review was conducted on the patients who underwent arthroscopic AICG with an adjustable-loop suspensory fixation device from January 2017 to December 2020. Patients with traumatic anterior shoulder instability, significant glenoid bone defects, and a minimum follow-up of 24 months were included.

Persistent Mesodermal Differentiation Capability of Bone Marrow MSCs Isolated from Aging Patients with Low-Energy Traumatic Hip Fracture and Osteoporosis: A Clinical Evidence.

A low-energy hit, such as a slight fall from a bed, results in a bone fracture, especially in the hip, which is a life-threatening risk for the older adult and a heavy burden for the social economy. Patients with low-energy traumatic bone fractures usually suffer a higher level of bony catabolism accompanied by osteoporosis. Bone marrow-derived stem cells (BMSCs) are critical in osteogenesis, leading to metabolic homeostasis in the healthy bony microenvironment.

Adipose-derived stem cell-based optimization strategies for musculoskeletal regeneration: recent advances and perspectives.

Musculoskeletal disorders are the leading causes of physical disabilities worldwide. The poor self-repair capacity of musculoskeletal tissues and the absence of effective therapies have driven the development of novel bioengineering-based therapeutic approaches. Adipose-derived stem cell (ADSC)-based therapies are being explored as new regenerative strategies for the repair and regeneration of bone, cartilage, and tendon owing to the accessibility, multipotency, and active paracrine activity of ADSCs.

Metformin-loaded PLGA microspheres combined with an in situ-formed injectable SA/BG hydrogel alleviate rotator cuff muscle degeneration.

Rotator cuff tears are a prevalent musculoskeletal problem that affect many individuals and may result in substantial social and health-related expenses. Moreover, the muscular fat infiltration and dystrophy associated with rotator cuff tears have been persistent challenges in rotator cuff surgical repair and postoperative rehabilitation. In this study, an in situ-formed injectable sodium alginate (SA) and bioglass (BG) hydrogel consisting of poly (lactic-co-glycolic acid) (PLGA) microspheres containing metformin (SA/BG-PLGA-Met) was developed for the prevention of muscular fat infiltration and dystrophy.

Potential of thermoresponsive hydrogel as an alternative therapy for rat knee osteoarthritis.

Osteoarthritis is a degenerative condition that is highly prevalent and primarily affects the joints. The knee is the most commonly affected site, impacting the lives of over 300 million individuals worldwide. This study presents a potential solution to address the unmet need for a minimally invasive technique in the treatment of osteoarthritis: a biocompatible, injectable, and thermoresponsive hydrogel.

Macroporous Granular Hydrogels Functionalized with Aligned Architecture and Small Extracellular Vesicles Stimulate Osteoporotic Tendon-To-Bone Healing.

Osteoporotic tendon-to-bone healing (TBH) after rotator cuff repair (RCR) is a significant orthopedic challenge. Considering the aligned architecture of the tendon, inflammatory microenvironment at the injury site, and the need for endogenous cell/tissue infiltration, there is an imminent need for an ideal scaffold to promote TBH that has aligned architecture, ability to modulate inflammation, and macroporous structure. Herein, a novel macroporous hydrogel comprising sodium alginate/hyaluronic acid/small extracellular vesicles from adipose-derived stem cells (sEVs) (MHA-sEVs) with aligned architecture and immunomodulatory ability is fabricated.

Cryopreserved Adipose-Derived Stem Cell Sheets: An Off-the-Shelf Scaffold for Augmenting Tendon-to-Bone Healing in a Rabbit Model of Chronic Rotator Cuff Tear.

Background: Adipose-derived stem cell (ADSC) sheets have been shown to promote tendon-to-bone healing. However, conventional laboratory preparation methods for ADSC sheets are time-consuming and risky, which precludes their diverse clinical applications.

Purpose: To explore the utility of off-the-shelf cryopreserved ADSC sheets (c-ADSC sheets) for rotator cuff tendon-to-bone healing.

Arthroscopic Autologous Iliac Crest Grafting Results in Similar Outcomes and Low Recurrence Compared to Remplissage Plus Bankart Repair for Anterior Shoulder Instability With Bipolar Bone Defects.

Purpose: To compare the functional outcomes, range of motion (ROM), recurrence rates, and complication rates of arthroscopic autologous iliac crest grafting (AICG) and Remplissage plus Bankart repair (RB) for anterior shoulder instability with bipolar bone defects.

Methods: This study enrolled patients undergoing arthroscopic AICG or RB with 13.5-25% glenoid bone defect combined with Hill-Sachs lesion between January 2013 and April 2020, who had a minimum 2-year follow-up.

The recombinant human fibroblast growth factor-18 (sprifermin) improves tendon-to-bone healing by promoting chondrogenesis in a rat rotator cuff repair model.

Background: Rotator cuff healing is improved by reconstructing the fibrocartilaginous structure of the tendon-to-bone enthesis. Fibroblast growth factor (FGF)-18 (sprifermin) is a well-known growth factor that improves articular cartilage repair via its anabolic effect. This study aimed to investigate the effect of recombinant human FGF-18 (rhFGF-18) on the chondrogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs) in vitro and tendon-to-bone healing in a rat model of rotator cuff repair.

Construction of a Novel Female Sterility System for Hybrid Rice.

The main constraints of current hybrid rice technology using male sterility (MS) are the low yield and high labor costs of hybrid rice seed (HRS) production. Therefore, there is an urgent need for innovative new hybrid rice technology. Fortunately, we discovered a unique spontaneous sporophytic rice mutant controlled by a single recessive locus in the nucleus.

Amorphous calcium phosphate nanoparticles using adenosine triphosphate as an organic phosphorus source for promoting tendon-bone healing.

Background: Rotator cuff tear (RCT) is a common problem of the musculoskeletal system. With the advantage of promoting bone formation, calcium phosphate materials have been widely used to augment tendon-bone healing. However, only enhancing bone regeneration may be not enough for improving tendon-bone healing.

Adipose Stem Cell-Derived Exosomes Ameliorate Chronic Rotator Cuff Tendinopathy by Regulating Macrophage Polarization: From a Mouse Model to a Study in Human Tissue.

Background: Chronic rotator cuff (RC) tendinopathy is one of the most prevalent causes of shoulder pain. Growing evidence suggests that macrophages play a significant role in the proinflammatory response, resolution of inflammation, and tissue healing of tendinopathy. In particular, enhancement of M2 macrophage (M2φ) activity contributes to the accelerated healing of tendinopathy.

Adipose Stem Cell-Derived Exosomes Decrease Fatty Infiltration and Enhance Rotator Cuff Healing in a Rabbit Model of Chronic Tears.

Background: Fatty infiltration and poor tendon-bone healing in chronic rotator cuff tears (RCTs) are associated with unsatisfactory prognosis. Adipose stem cell-derived exosomes (ASC-Exos), having multiple biological effects, can prevent muscle degeneration in acute RCTs. However, the effects of ASC-Exos on fatty infiltration and tendon-bone healing in chronic RCTs remain unknown.

Updated Hourly Emissions Factors for Chinese Power Plants Showing the Impact of Widespread Ultralow Emissions Technology Deployment.

Nationwide severe air pollution has prompted China to mandate the adoption of ultralow emissions (ULE) control technologies at all of its coal-fired power plants by 2020. This process has accelerated greatly since 2014 and, combined with operational adjustments related to overcapacity, has reduced the emissions of nitrogen oxides (NO ), sulfur dioxide (SO), and particulate matter (PM). Yet the quantitative understanding of ULE benefits is poor.

Hydroxyapatite Nanowire@Magnesium Silicate Core-Shell Hierarchical Nanocomposite: Synthesis and Application in Bone Regeneration.

Multifunctional biomaterials that simultaneously combine high biocompatibility, biodegradability, and bioactivity are promising for applications in various biomedical fields such as bone defect repair and drug delivery. Herein, the synthesis of hydroxyapatite nanowire@magnesium silicate nanosheets (HANW@MS) core-shell porous hierarchical nanocomposites (nanobrushes) is reported. The morphology of the magnesium silicate (MS) shell can be controlled by simply varying the solvothermal temperature and the amount of Mg ions.

Evaluation of zinc-doped mesoporous hydroxyapatite microspheres for the construction of a novel biomimetic scaffold optimized for bone augmentation.

Biomaterials with high osteogenic activity are desirable for sufficient healing of bone defects resulting from trauma, tumor, infection, and congenital abnormalities. Synthetic materials mimicking the structure and composition of human trabecular bone are of considerable potential in bone augmentation. In the present study, a zinc (Zn)-doped mesoporous hydroxyapatite microspheres (Zn-MHMs)/collagen scaffold (Zn-MHMs/Coll) was developed through a lyophilization fabrication process and designed to mimic the trabecular bone.

Enhanced osteogenesis and angiogenesis by mesoporous hydroxyapatite microspheres-derived simvastatin sustained release system for superior bone regeneration.

Biomaterials with both excellent osteogenic and angiogenic activities are desirable to repair massive bone defects. In this study, simvastatin with both osteogenic and angiogenic activities was incorporated into the mesoporous hydroxyapatite microspheres (MHMs) synthesized through a microwave-assisted hydrothermal method using fructose 1,6-bisphosphate trisodium salt (FBP) as an organic phosphorous source. The effects of the simvastatin-loaded MHMs (S-MHMs) on the osteogenic differentiation of rat bone marrow mesenchymal stem cells (rBMSCs) and angiogenesis in EA.

Copper-doped mesoporous hydroxyapatite microspheres synthesized by a microwave-hydrothermal method using creatine phosphate as an organic phosphorus source: application in drug delivery and enhanced bone regeneration.

The development of multifunctional biomaterials with drug delivery ability, and pro-osteogenic and pro-angiogenic activities has garnered increasing interest in the field of regenerative medicine. In the present study, hypoxia-mimicking copper (Cu)-doped mesoporous hydroxyapatite (HAP) microspheres (Cu-MHMs) were successfully synthesized through a microwave-hydrothermal method by using creatine phosphate as an organic phosphorus source. The Cu-MHMs doped with 0.