DMSO-Assisted Control Enables Highly Efficient 2D/3D Hybrid Perovskite Solar Cells.

Building 2D/3D heterojunction is a promising approach to passivate surface defects and improve the stability of perovskite solar cells (PSCs). Developing effective methods to build high-quality 2D/3D heterojunction is in demand. The formation of 2D/3D heterojunction involves both the diffusion of 2D spacer molecules and phase transition from 3D to 2D structure.

High-Performance Intrinsically Stretchable Organic Photovoltaics Enabled by Robust Silver Nanowires/S-PH1000 Hybrid Transparent Electrodes.

Intrinsically stretchable organic photovoltaics (is-OPVs) hold significant promise for integration into self-powered wearable electronics. However, their potential is hindered by the lack of sufficient consistency between optoelectronic and mechanical properties. This is primarily due to the limited availability of stretchable transparent electrodes (STEs) that possess both high conductivity and stretchability.

The Multi-Functional Third Acceptor Realizes the Synergistic Improvement in Photovoltaic Parameters and the High-Ratio Tolerance of Ternary Organic Photovoltaics.

The ternary strategy proves effective for breakthroughs in organic photovoltaics (OPVs). Elevating three photovoltaic parameters synergistically, especially the proportion-insensitive third component, is crucial for efficient ternary devices. This work introduces a molecular design strategy by comprehensively analyzing asymmetric end groups, side-chain engineering, and halogenation to explore the outstanding optoelectronic properties of the proportion-insensitive third component in efficient ternary systems.

Thorough Optimization for Intrinsically Stretchable Organic Photovoltaics.

The development of intrinsically stretchable organic photovoltaics (is-OPVs) with a high efficiency is of significance for practical application. However, their efficiencies lag far behind those of rigid or even flexible counterparts. To address this issue, an advanced top-illuminated OPV is designed and fabricated, which is intrinsically stretchable and has a high performance, through systematic optimizations from material to device.

Balancing the Selective Absorption and Photon-to-Electron Conversion for Semitransparent Organic Photovoltaics with 5.0% Light-Utilization Efficiency.

Efficiently converting invisible light while allowing full visible light transmission is key to achieving high-performance semitransparent organic photovoltaics (ST-OPVs). Here, a detailed balance strategy is explored to optimize the ST-OPV via taking both absorption and carrier dynamics into consideration. Based on this principle, comprehensive optimizations are carried out, including a ternary strategy, donor:acceptor blend ratio, thickness, antireflection, etc.

Non-Halogenated Solvents Processed Efficient ITO-Free Flexible Organic Solar Cells with Upscaled Area.

Organic solar cells (OSCs) show the potential to harness solar energy at a lower cost and in a greener way with the merits of mechanical flexibility and potential low-cost upscaling production with solution processing. Meanwhile, the common use of toxic halogenated solvents causes pollution to the natural environment, and thus, needs to be avoided. Following the authors' previous work on the design of top-illuminated ultrathin Ag-based device structure highlighting most merits of OSC, herein non-halogen solvent and additive processing OSCs are presented, which exhibit high power conversion efficiency (PCE) of 17.

Synergistic Effects of Chlorination and Branched Alkyl Side Chain on the Photovoltaic Properties of Simple Non-Fullerene Acceptors with Quinoxaline as the Core.

To date, the fused-ring electron acceptors show the best photovoltaic performances, and the development of simple non-fullerene acceptors via intramolecular noncovalent interactions can reduce synthetic costs. In this work, four simple non-fullerene acceptors with an A-D-A'-D-A configuration (QCIC1, QCIC2, QCIC3, and QCIC4) were synthesized. They contained the same conjugated backbone (A': quinoxaline; D: cyclopentadithiophene; A: dicyano-indanone) but different halogen atoms and alkyl side chains.

Oriented Perovskite Growth Regulation Enables Sensitive Broadband Detection and Imaging of Polarized Photons Covering 300-1050 nm.

Photodetectors selective to the polarization empower breakthroughs in sensing technology for target identification. However, the realization of polarization-sensitive photodetectors based on intrinsically anisotropic crystal structure or extrinsically anisotropic device pattern requires complicated epitaxy and etching processes, which limit scalable production and application. Here, solution-processed PEA MA (Sn Pb ) I (PEA= phenylethylammonium, MA= methylammonium) polycrystalline film is probed as photoactive layer toward sensing polarized photon from 300 to 1050 nm.

Correction: Optical and electrical effects of plasmonic nanoparticles in high-efficiency hybrid solar cells.

Correction for 'Optical and electrical effects of plasmonic nanoparticles in high-efficiency hybrid solar cells' by Wei-Fei Fu et al., Phys. Chem.

Highly Efficient Semitransparent Solar Cells with Selective Absorption and Tandem Architecture.

Semitransparent (ST) photovoltaics (PVs) with selective absorption in the UV or/and near-infrared (NIR) range(s) and reduced energy losses, are critical for high-efficiency solar-window applications. Here, a high-performance tandem ST-PV with selected absorption in the desirable regions of the solar spectrum is demonstrated. An ultralarge-bandgap perovskite film (FAPbBr Cl , E ≈ 2.

Improved performance and stability of perovskite solar cells with bilayer electron-transporting layers.

Zinc oxide nanoparticles (NPs) are very promising in replacing the phenyl-C-butyric acid methyl ester (PCBM) as electron-transporting materials due to the high carrier mobilities, superior stability, low cost and solution processability at low temperatures. The perovskite/ZnO NPs heterojunction has also demonstrated much better stability than perovskite/PCBM, however it shows lower power conversion efficiency (PCE) compared to the state-of-art devices based on perovskite/PCBM heterojunction. Here, we demonstrated that the insufficient charge transfer from methylammonium lead iodide (MAPbI) to ZnO NPs and significant interface trap-states lead to the poor performance and severe hysteresis of PSC with MAPbI/ZnO NPs heterojunction.

Donor-Acceptor Conjugated Macrocycles: Synthesis and Host-Guest Coassembly with Fullerene toward Photovoltaic Application.

Electron-rich (donor) and electron-deficient (acceptor) units to construct donor-acceptor (D-A) conjugated macrocycles were investigated to elucidate their interactions with electron-deficient fullerene. Triphenylamine and 4,7-bisthienyl-2,1,3-benzothiadiazole were alternately linked through acetylene, as the donor and acceptor units, respectively, for pentagonal 3B2A and hexagonal 4B2A macrocycles. As detected by scanning tunneling microscopy, both D-A macrocycles were found to form an interesting concentration-controlled nanoporous monolayer on highly oriented pyrolytic graphite, which could effectively capture fullerene.

Vertically Oriented 2D Layered Perovskite Solar Cells with Enhanced Efficiency and Good Stability.

Vertically oriented highly crystalline 2D layered (BA) (MA) Pb I (BA = CH (CH ) NH , MA = CH NH , n = 3, 4) perovskite thin-films are fabricated with the aid of ammonium thiocyanate (NH SCN) additive through one-step spin-coating process. The humidity-stability of the film is certified by the almost unchanged X-ray diffraction patterns after exposed to humid atmosphere (H = 55 ± 5%) for 40 d. The photovoltaic devices with the structure of indium tin oxide(ITO)/poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate)/(BA) (MA) Pb I (n = 3,4)/[6,6]-phenyl-C -butyric acid methyl ester/Bathocuproine/Ag are fabricated.

Synthesis and fast transfer of monolayer MoS on reusable fused silica.

Atomically thin, two-dimensional materials ranging from superconductors, metals, semiconductors to insulators are emerging as potential candidates for the next-generation digital electronics and optoelectronic applications. Their synthesis on a commonly used substrate and fast transfer to a plenty of desired substrates need to be addressed to meet the industrialization criteria for practical applications. In this study, fused silica, which is amorphous, transparent, and inexpensive, was examined as a substrate for MoS synthesis.

Effects of heteroatom substitution in spiro-bifluorene hole transport materials.

Three new spirofluorene-based hole transport materials, Spiro-S, Spiro-N, and Spiro-E, are synthesized by replacing the -methoxy substituent in 2,2',7,7'-tetrakis(,-di--methoxyphenylamine)-9,9'-spirobifluorene (Spiro-MeOTAD) with methylsulfanyl, ,-dimethylamino and ethyl groups. Their properties as hole transport materials in perovskite solar cells are investigated. The impact of replacing the -methoxy substituent on bulk properties, such as the photophysical properties, HOMO/LUMO energy level, hole extraction properties and morphologies of perovskite thin films are investigated.

Solution-Processed 8-Hydroquinolatolithium as Effective Cathode Interlayer for High-Performance Polymer Solar Cells.

Solution-processed 8-hydroxyquinolinatolithium (s-Liq) was successfully applied as an efficient cathode interlayer in bulk heterojunction polymer solar cells (PSCs), giving rise to enhancement in device performance. The ultraviolet photoelectron spectra results revealed that the presence of s-Liq could lower work function of Al cathode, allowing for the ohmic contacts with the fullerene acceptor for better electron extraction and also a larger work function difference between the two electrodes, which leads to an increase in open-circuit voltage (V(oc)). Scanning Kelvin probe microscopy study on the surface potential of active layers suggested that an interfacial dipole was formed in the s-Liq interlayer between the active layer and the Al cathode, which enhanced the intrinsic built-in potential in the device for better charge transportation and extraction.

Dopant-Free Hole-Transporting Material with a C3h Symmetrical Truxene Core for Highly Efficient Perovskite Solar Cells.

Herein we present a new structural design of hole-transporting material, Trux-OMeTAD, which consists of a C3h Truxene-core with arylamine terminals and hexyl side-chains. This planar, rigid, and fully conjugated molecule exhibits excellent hole mobility and desired surface energy to the perovskite uplayer. Perovskite solar cells fabricated using the p-i-n architecture with Trux-OMeTAD as the p-layer, show a high PCE of 18.

Graphene Nucleation Preferentially at Oxygen-Rich Cu Sites Rather Than on Pure Cu Surface.

Graphene nucleation at oxygen-rich Cu sites instead of on the commonly assumed pure Cu surface is discovered using high-spatial-resolution scanning Auger electron microscopy, which reveals a strong O signal existing underneath the graphene seeds, along with density functional theory calculations.

Enhanced photovoltaic performance of CH3NH3PbI3 perovskite solar cells through interfacial engineering using self-assembling monolayer.

Morphology control is critical to achieve high efficiency CH3NH3PbI3 perovskite solar cells (PSC). The surface properties of the substrates on which crystalline perovskite thin films form are expected to affect greatly the crystallization and, thus, the resulting morphology. However, this topic is seldom examined in PSC.

Solution-grown organic single-crystalline donor-acceptor heterojunctions for photovoltaics.

Organic single crystals are ideal candidates for high-performance photovoltaics due to their high charge mobility and long exciton diffusion length; however, they have not been largely considered for photovoltaics due to the practical difficulty in making a heterojunction between donor and acceptor single crystals. Here, we demonstrate that extended single-crystalline heterojunctions with a consistent donor-top and acceptor-bottom structure throughout the substrate can be simply obtained from a mixed solution of C60 (acceptor) and 3,6-bis(5-(4-n-butylphenyl)thiophene-2-yl)-2,5-bis(2-ethylhexyl)pyrrolo[3,4-c]pyrrole-1,4-dione (donor). 46 photovoltaic devices were studied with the power conversion efficiency of (0.

Improving polymer/nanocrystal hybrid solar cell performance via tuning ligand orientation at CdSe quantum dot surface.

Achieving superior solar cell performance based on the colloidal nanocrystals remains challenging due to their complex surface composition. Much attention has been devoted to the development of effective surface modification strategies to enhance electronic coupling between the nanocrystals to promote charge carrier transport. Herein, we aim to attach benzenedithiol ligands onto the surface of CdSe nanocrystals in the "face-on" geometry to minimize the nanocrystal-nanocrystal or polymer-nanocrystal distance.

Highly efficient hybrid solar cells with tunable dipole at the donor-acceptor interface.

Effects of molecular dipole at the conjugated polymer-nanocrystal interface on the energy level alignment, the exciton dissociation process, and consequently the photovoltaic performance of poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b']-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT):CdSe quantum dot bulk heterojunction hybrid solar cells are systemically studied. Power conversion efficiency up to 4.0% is achieved when 4-fluorobenzenethiol is used for ligand exchange.

Pyrene and diketopyrrolopyrrole-based oligomers synthesized via direct arylation for OSC applications.

In this report, an atom efficient and facile synthetic strategy for accessing multi-diketopyrrolopyrrole (DPP)-based oligomers used in solution-processed organic field effect transistors (OFETs) and organic solar cells (OSCs) has been developed. The DPP units were successfully installed onto benzene and pyrene cores via palladium-catalyzed dehydrohalogenative coupling of mono-capped DPPs with multi-bromo-benzene or -pyrene (direct arylation), affording four oligomer small molecules (SMs 1-4) containing bis-, tri-, tri-, and tetra-DPP, respectively, in high yields of 78-96%. All the designed linear or branched DPP-based oligomers exhibit broad light absorptions, narrow band-gaps (1.

Evaluation of heterocycle-modified pentathiophene-based molecular donor materials for solar cells.

Two novel solution-processable acceptor-donor-acceptor (A-D-A)-structured organic small molecules with diketopyrrolopyrrole (DPP) as terminal acceptor units and pentathiophene (PTA) or pyrrole-modified pentathiophene (NPTA) as the central donor unit, namely, DPP2(PTA) and DPP2(NPTA), were designed and synthesized. We examined the effects of changing the central bridging heteroatoms of the five-ring-fused thienoacene core identity from sulfur [DPP2(PTA)] to nitrogen [DPP2(NPTA)] in the small-molecule donor material. Replacement of the bridging atom with a different electronic structure has a visible effect on both the optical and electrical properties: DPP2(NPTA), which contains much more electron-rich pyrrole in the central thienoacene unit, possesses red-shifted absorption and a higher HOMO level relative to DPP2(PTA) with the less electron-rich thiophene in the same position.