An analytical heat transfer model for transient Raman thermometry analysis.

Transient Raman thermometry improves on its steady-state counterpart by eliminating the error-prone steps of temperature calibration and laser absorption measurement. However, the accompanying complex heat transfer process often requires numerical analysis, such as the finite element method, to decipher the measured data. This step can be time-consuming, inconvenient, and difficult to derive a physical understanding of the heat transfer process involved.

Plasma Chemical Looping: Unlocking High-Efficiency CO Conversion to Clean CO at Mild Temperatures.

We propose a plasma chemical looping CO splitting (PCLCS) approach that enables highly efficient CO conversion into O-free CO at mild temperatures. PCLCS achieves an impressive 84% CO conversion and a 1.3 mmol g CO yield, with no O detected.

Enabling Polymer Single Crystals to Be High-Performance Dielectric.

Semicrystalline polymer dielectrics (SPDs) are highly sought-after state-of-the-art dielectric materials. As the disorder in SPDs degrades their electrical properties, homogeneously ordered SPDs are desired. However, complex crystallization behaviors of polymers make such homogeneity elusive.

Differentiating Thermal Conductances at Semiconductor Nanocrystal/Ligand and Ligand/Solvent Interfaces in Colloidal Suspensions.

Infrared-pump, electronic-probe (IPEP) spectroscopy is used to measure heat flow into and out of CdSe nanocrystals suspended in an organic solvent, where the surface ligands are initially excited with an infrared pump pulse. Subsequently, the heat is transferred from the excited ligands to the nanocrystals and in parallel to the solvent. Parallel heat transfer in opposite directions uniquely enables us to differentiate the thermal conductances at the nanocrystal/ligand and ligand/solvent interfaces.

Nanoconfinement between Graphene Walls Suppresses the Near-Wall Diffusion of the Ionic Liquid [BMIM][PF].

We identify two distinct regimes for the diffusion of the ionic liquid [BMIM][PF] confined between parallel graphene walls using molecular dynamics simulations. Within 2 nm of the wall, the cations and anions form a well-defined layered structure. In this region, the in-plane diffusion coefficients are suppressed when compared to their bulk values and increase monotonically with the distance away from the wall.

Halide Perovskites: Thermal Transport and Prospects for Thermoelectricity.

The recent re-emergence of halide perovskites has received escalating interest for optoelectronic applications. In addition to photovoltaics, the multifunctional nature of halide perovskites has led to diverse applications. The ultralow thermal conductivity coupled with decent mobility and charge carrier tunability led to the prediction of halide perovskites as a possible contender for future thermoelectrics.

Spontaneous Electronic Band Formation and Switchable Behaviors in a Phase-Rich Superatomic Crystal.

Structural phase transitions run in families of crystalline solids. Perovskites, for example, feature a remarkable number of structural transformations that produce a wealth of exotic behaviors, including ferroelectricity, magnetoresistance, metal-insulator transitions and superconductivity. In superatomic crystals and other such materials assembled from programmable building blocks, phase transitions offer pathways to new properties that are both tunable and switchable.

Phonon Speed, Not Scattering, Differentiates Thermal Transport in Lead Halide Perovskites.

Thermal management plays a critical role in the design of solid state materials for energy conversion. Lead halide perovskites have emerged as promising candidates for photovoltaic, thermoelectric, and optoelectronic applications, but their thermal properties are still poorly understood. Here, we report on the thermal conductivity, elastic modulus, and sound speed of a series of lead halide perovskites MAPbX (X = Cl, Br, I), CsPbBr, and FAPbBr (MA = methylammonium, FA = formamidinium).

Orientational order controls crystalline and amorphous thermal transport in superatomic crystals.

In the search for rationally assembled functional materials, superatomic crystals (SACs) have recently emerged as a unique class of compounds that combine programmable nanoscale building blocks and atomic precision. As such, they bridge traditional semiconductors, molecular solids, and nanocrystal arrays by combining their most attractive features. Here, we report the first study of thermal transport in SACs, a critical step towards their deployment as electronic, thermoelectric, and phononic materials.

Temperature Dependent Thermal Conductivity and Thermal Interface Resistance of Pentacene Thin Films with Varying Morphology.

Temperature dependent thermal conductivities and thermal interface resistances of pentacene (Pn) thin films deposited on silicon substrates and self-assembled monolayer-modified [octadecyltrichlorosilane (OTS) and (3-aminopropyl)triethoxysilane (APTES)] silicon substrates were measured using frequency domain thermoreflectance. Atomic force microscopy images were used to derive an effective film thickness for thermal transport that accounts for surface roughness. Data taken over a temperature range of 77-300 K for various morphologies and film thicknesses show that the thermal conductivity increases with increasing Pn grain size.

Vibrational mismatch of metal leads controls thermal conductance of self-assembled monolayer junctions.

We present measurements of the thermal conductance of self-assembled monolayer (SAM) junctions formed between metal leads (Au, Ag, Pt, and Pd) with mismatched phonon spectra. The thermal conductance obtained from frequency domain thermoreflectance experiments is 65 ± 7 MW/m(2) K for matched Au-alkanedithiol-Au junctions, while the mismatched Au-alkanedithiol-Pd junctions yield a thermal conductance of 36 ± 3 MW/m(2) K. The experimental observation that junction thermal conductance (per molecule) decreases as the mismatch between the lead vibrational spectra increases, paired with results from molecular dynamics (MD) simulations, suggest that phonons scatter elastically at the metal-SAM interfaces.

Bi(1)-(x)Sb(x) alloy nanocrystals: colloidal synthesis, charge transport, and thermoelectric properties.

Nanostructured Bi1-xSbx alloys constitute a convenient system to study charge transport in a nanostructured narrow-gap semiconductor with promising thermoelectric properties. In this work, we developed the colloidal synthesis of monodisperse sub-10 nm Bi1-xSbx alloy nanocrystals (NCs) with controllable size and compositions. The surface chemistry of Bi1-xSbx NCs was tailored with inorganic ligands to improve the interparticle charge transport as well as to control the carrier concentration.

Surface chemistry mediates thermal transport in three-dimensional nanocrystal arrays.

Arrays of ligand-stabilized colloidal nanocrystals with size-tunable electronic structure are promising alternatives to single-crystal semiconductors in electronic, optoelectronic and energy-related applications. Hard/soft interfaces in these nanocrystal arrays (NCAs) create a complex and uncharted vibrational landscape for thermal energy transport that will influence their technological feasibility. Here, we present thermal conductivity measurements of NCAs (CdSe, PbS, PbSe, PbTe, Fe3O4 and Au) and reveal that energy transport is mediated by the density and chemistry of the organic/inorganic interfaces, and the volume fractions of nanocrystal cores and surface ligands.

Microfluidic integration of substantially round glass capillaries for lateral patch clamping on chip.

High-throughput screening of drug candidates for channelopathies can greatly benefit from an automated patch-clamping assay. Automation of the patch clamping through microfluidics ideally requires on-chip integration of glass capillaries with substantially round cross section. Such round capillaries, if they can only be integrated to connect isolated reservoirs on a substrate surface, will lead to a "lateral" configuration which is simple yet powerful for the patch clamping.

High-performance flow-focusing geometry for spontaneous generation of monodispersed droplets.

A high-performance flow-focusing geometry for spontaneous generation of monodispersed droplets is demonstrated. In this geometry, a two-phase flow is forced through a circular orifice integrated inside a silicon-based microchannel. The orifice with its cusp-like edge exerts a ring of maximized stress around the flow and ensures controlled breakup of droplets for a wide range of flow rates, forming highly periodic and reproducible dispersions.

Differential effects of polyunsaturated fatty acids on membrane capacitance and exocytosis in rat pheochromocytoma-12 cells.

The fusion of synaptic vesicles with the plasma membrane during exocytosis can be recorded by membrane capacitance measurements under voltage-clamp conditions. These measurements enable high time-resolution quantitation of exocytosis. The present study was carried out using the above technique to elucidate the effects of various polyunsaturated fatty acids on exocytosis in a neuroendocrine cell, the rat pheochromocytoma-12 (PC12) cell.