Effects of network structures on the tensile toughness of copper-catalyzed azide-alkyne cycloaddition (CuAAC)-based photopolymers.

In the present study, the photo-initiated copper-catalyzed azide-alkyne cycloaddition (CuAAC) polymerization was utilized to form structurally diverse glassy polymer networks. Systematic alterations in the monomer backbone rigidity (e.g.

Photopolymerized Triazole-Based Glassy Polymer Networks with Superior Tensile Toughness.

Photopolymerization is a ubiquitous, indispensable technique widely applied in applications from coatings, inks, and adhesives to thermosetting restorative materials for medical implants, and the fabrication of complex macro-scale, microscale, and nanoscale 3D architectures via additive manufacturing. However, due to the brittleness inherent in the dominant acrylate-based photopolymerized networks, a significant need exists for higher performance resin/oligomer formulations to create tough, defect-free, mechanically ductile, thermally and chemically resistant, high modulus network polymers with rapid photocuring kinetics. This study presents densely cross-linked triazole-based glassy photopolymers capable of achieving preeminent toughness of ≈70 MJ m and 200% strain at ambient temperature, comparable to conventional tough thermoplastics.

Increased Cardiomyocyte Alignment and Intracellular Calcium Transients Using Micropatterned and Drug-Releasing Poly(Glycerol Sebacate) Elastomers.

Myocardial tissue engineering is a promising therapy for myocardial infarction recovery. The success of myocardial tissue engineering is likely to rely on the combination of cardiomyocytes, prosurvival regulatory signals, and a flexible biomaterial structure that can deliver them. In this study, poly(glycerol sebacate) (PGS), which exhibits stable elasticity under repeated tensile loading, was engineered to provide physical features that aligned cardiomyocytes in a similar manner to that seen in native cardiac tissue.

Photopolymerization study and adhesive properties of self-etch adhesives containing bis(acyl)phosphine oxide initiator.

Objective: This paper investigates the photo-co-polymerization behavior of a blend of a diacrylamide (DEBAAP) with a phosphonylated acidic monomer using either bis(acyl)phosphine oxide or camphorquinone/amine as photo-initiator and studies the effect of variation of the structure of the phosphonylated acidic monomer on the shear bond strength to human dentin.

Methods: Photopolymerization kinetics has been assessed through the use of photo-DSC with either initiating system and with and without a phosphonic acid monomer, while the shear bond strengths (SBS) of dentin bonding agents formulated with several phosphonylated acidic monomers have been evaluated by macro SBS testing on human dentin.

Results: Photo-DSC results show that bis(acyl)phosphine oxide initiates a faster polymerization than camphorquinone/amine and that both photopolymerizations are accelerated by the phosphonic acid monomer.

Mechanically tissue-like elastomeric polymers and their potential as a vehicle to deliver functional cardiomyocytes.

One of the major challenges in the field of biomaterials engineering is the replication of the non-linear elasticity observed in soft tissues. In the present study, non-linearly elastic biomaterials were successfully fabricated from a chemically cross-linked elastomeric poly(glycerol sebacate) (PGS) and thermoplastic poly(L-lactic acid) (PLLA) using the core/shell electrospinning technique. The spun fibrous materials, containing a PGS core and PLLA shell, demonstrated J-shaped stress-strain curves, and having ultimate tensile strength, rupture elongation, and stiffness constants respectively comparable to muscle tissue properties.

A comparative study on poly(xylitol sebacate) and poly(glycerol sebacate): mechanical properties, biodegradation and cytocompatibility.

In order to develop degradable elastomers with a satisfactory combination of flexibility and enzyme-mediated degradation rate, the mechanical properties, enzymatic degradation kinetics and biocompatibility of poly(xylitol sebcate) (PXS) has been systematically investigated in comparison with poly(glycerol sebacate) (PGS). Under the same level of crosslinked density, the PXS elastomer networks have approximately twice the stretchability (elongation at break) of their PGS counterparts. This observation is attributable to the relatively longer and more orientable xylitol monomers, compared with glycerol molecules.

In vitro enzymatic degradation of poly (glycerol sebacate)-based materials.

Enzymatic degradation is a major feature of polyester implants in vivo. An in vitro experimental protocol that can simulate and predict the in vivo enzymatic degradation kinetics of implants is of importance not only to our understanding of the scientific issue, but also to the well-being of animals. In this study, we explored the enzymatic degradation of PGS-based materials in vitro, in tissue culture medium or a buffer solution at the pH optima and under static or cyclic mechanical-loading conditions, in the presence of defined concentrations of an esterase.

The mechanical characteristics and in vitro biocompatibility of poly(glycerol sebacate)-bioglass elastomeric composites.

Biodegradable elastomeric materials have gained much recent attention in the field of soft tissue engineering. Poly(glycerol sebacate) (PGS) is one of a new family of elastomers which are promising candidates used for soft tissue engineering. However, PGS has a limited range of mechanical properties and has drawbacks, such as cytotoxicity caused by the acidic degradation products of very soft PGS and degradation kinetics that are too fast in vivo to provide sufficient mechanical support to the tissue.

Photobleaching of camphorquinone during polymerization of dimethacrylate-based resins.

Objective: The aim of this study was to compare the photobleaching rate of CQ in different dental resins.

Methods: The photodecomposition rate of CQ/amine system in bis-GMA/TEGDMA, bis-EMA and UDMA polymerizing monomers was evaluated at different light intensities. The photobleaching of the CQ was studied by monitoring the decrease in light absorption as a function of continuous irradiation time.

Influence of thermal expansion on shrinkage during photopolymerization of dental resins based on bis-GMA/TEGDMA.

Objective: The aim of this study was to assess volume changes that occur during photopolymerization of unfilled dental resins based on bis-GMA-TEGDMA.

Methods: The resins were activated for visible light polymerization by the addition of camphorquinone (CQ) in combination with dimethylamino ethylmethacrylate (DMAEMA) or ethyl-4-dimethyl aminobenzoate (EDMAB). A fibre-optic sensing method based on a Fizeau-type interferometric scheme was employed for monitoring contraction during photopolymerization.

Photopolymerization of N,N-dimethylaminobenzyl alcohol as amine co-initiator for light-cured dental resins.

Objective: The present study was carried out in order to assess the suitability of N,N-dimethylaminobenzyl alcohol (DMOH) as co-initiator of camphorquinone (CQ) and 1-phenyl-1,2-propanedione (PPD) in light-cured dental resins.

Methods: DMOH was synthesized and used as co-initiator for the photopolymerization of a model resin based on {2,2-bis[4-(2-hydroxy-3-methacryloxyprop-1-oxy)phenyl]propane} (Bis-GMA)/triethylene glycol dimethacrylate (TEGDMA). Experimental formulations containing CQ or PPD in combination with DMOH at different concentrations were studied.

Photoinduced plasticity in cross-linked polymers.

Chemically cross-linked polymers are inherently limited by stresses that are introduced by post-gelation volume changes during polymerization. It is also difficult to change a cross-linked polymer's shape without a corresponding loss of material properties or substantial stress development. We demonstrate a cross-linked polymer that, upon exposure to light, exhibits stress and/or strain relaxation without any concomitant change in material properties.