Crestal Sinus Floor Augmentation Using Hydraulic Pressure and Vibrations: A Retrospective Single Cohort Study.

Purpose: To evaluate the sinus membrane perforation and implant survival rate after crestal minimally invasive sinus floor augmentation using hydraulic pressure and vibrations.

Materials And Methods: In this retrospective single cohort study, all patients who underwent minimally invasive sinus floor augmentation between 2007 and 2015 using hydraulic pressure and vibrations were included. The sinus membrane is elevated by physiologic saline at 1.

Patient-specific polyetheretherketone facial implants in a computer-aided planning workflow.

Purpose: In the present study, we report an innovative workflow using polyetheretherketone (PEEK) patient-specific implants for esthetic corrections in the facial region through onlay grafting. The planning includes implant design according to virtual osteotomy and generation of a subtraction volume. The implant design was refined by stepwise changing the implant geometry according to soft tissue simulations.

A pilot-study of a minimally invasive technique to elevate the sinus floor membrane and place graft for augmentation using high hydraulic pressure: 18-month follow-up of 20 cases.

Objective: To evaluate medical efficacy and safety of crestal, minimally invasive sinus floor augmentation (MISFA) using an innovative method based on high hydraulic pressure.

Study Design: Twenty MISFA using the novel Jeder-System were performed in 18 patients at 2 study sites in Vienna, Austria. The Jeder-System consists of the Jeder-drill, the Jeder-pump, and a connecting tube-set.

Sinus elevation with a cortical bone graft block: a patient-specific three-dimensional finite element study.

Purpose: The aim of the present study was to perform a finite element (FE) analysis of a modified sinus elevation procedure involving additional implantation of a cortical bone graft block for stabilization of an implant. A secondary aim was to compare the modified sinus augmentation with the standard technique and to determine whether the FE model to replace a dental implant can be simplified into a cylinder without compromising the accuracy of the outcome.

Materials And Methods: Based on computed tomography data, three-dimensional FE models of half of a maxilla were created.

The EuroChimerism concept for a standardized approach to chimerism analysis after allogeneic stem cell transplantation.

Hematopoietic stem cell transplantation is becoming an increasingly important approach to treatment of different malignant and non-malignant disorders. There is thus growing demand for diagnostic assays permitting the surveillance of donor/recipient chimerism posttransplant. Current techniques are heterogeneous, rendering uniform evaluation and comparison of diagnostic results between centers difficult.

Standardization of DNA isolation from low cell numbers for chimerism analysis by PCR of short tandem repeats.

Analysis of short tandem repeats (STR) by PCR analysis is routinely used in chimerism diagnostics to monitor donor engraftment and to diagnose relapse. Some applications require chimerism analysis of low cell numbers, but no standardized protocol is available for DNA isolation from 1000 to 30,000 cells. The EU-supported EuroChimerism Consortium (project QLRT-2001-01485) selected four different protocols for 'small-scale' DNA isolation, which were tested by six laboratories for their ability to recover reproducible amounts of good quality DNA, suited for PCR-based STR analysis.

What does magnetic resonance imaging add to the prenatal ultrasound diagnosis of facial clefts?

Objective: Ultrasound is the modality of choice for prenatal detection of cleft lip and palate. Because its accuracy in detecting facial clefts, especially isolated clefts of the secondary palate, can be limited, magnetic resonance imaging (MRI) is used as an additional method for assessing the fetus. The aim of this study was to investigate the role of fetal MRI in the prenatal diagnosis of facial clefts.

Examination of dental casts in newborns with bilateral complete cleft lip and palate.

This study reports measurements of dental casts in patients up to 6 months of age with bilateral complete cleft lip and palate (BCLP). 25 mouth casts of newborns with BCLP were selected from the hospital archive. They were measured independently by two examiners who assigned numbers to each measurement, referring to the expected reproducibility.

Phenothiazine chloride and soft laser light have a biostimulatory effect on human osteoblastic cells.

Objective: Low-level laser therapy (LLLT) is a well accepted tool to accelerate wound healing and to reduce inflammation after oral implant insertion. Since there are no in vitro data on a combination of LLLT with prior photosensitization, it was the aim of this study to investigate if photosensitization with phenothiazine chloride results in an alteration of the biostimulatory effect of low-level laser irradiation.

Background Data: LLLT and antimicrobial photodynamic therapy are well established for the treatment of peri-implantitis.

Potential involvement of MYC- and p53-related pathways in tumorigenesis in human oral squamous cell carcinoma revealed by proteomic analysis.

Oral squamous cellular carcinoma is a malignant tumor with poor prognosis. Discovery of early markers to discriminate between malignant and normal cells is of high importance in clinical diagnosis. Subcellular fractions from 10 oral squamous cell carcinoma and corresponding control samples, enriched in mitochondrial and cytosolic proteins, as well as blood from the tumor were analyzed by proteomics, two-dimensional gel electrophoresis, followed by matrix-assisted laser desorption ionization time-of-flight mass spectrometry.

Treatment results of bisphosphonate-related osteonecrosis of the jaws.

Background: Osteonecrosis of the jaws occurs after the administration of bisphosphonates. An unequivocal treatment strategy is yet to be devised. We assess the treatment of patients with bisphosphonate-related osteonecrosis of the jaws (BRONJ).

Biodegradable polymer membrane used as septal splint.

The treatment of a crooked nose is one of the most challenging rhinoplastic procedures. Correction of the abnormally curved or fractured septum has been reported using mostly scoring techniques, septoplasty and submucous resection techniques; cartilaginous spreader grafts can also be sutured to the distorted septum. Extracorporal septal straightening and repositioning/refixation is another useful but difficult technique.

Accuracy of craniofacial measurements: computed tomography and three-dimensional computed tomography compared with stereolithographic models.

In a retrospective study, distance measurements of nine children with craniofacial malformation were analyzed. The accuracy of measurements was compared when measured on a workstation using a 16-slice multidetector spiral computed tomography and on a stereolithographic model. Three different methods of defining distances were investigated: 1) on the stereolithographic plastic models, 14 distances connecting landmarks were identified with a digitizer (Polaris Tracker); 2) the same distances were defined at axial, coronal, and sagittal reformats of the computed tomography data set and measured using a Philips MX View workstation; and 3) the same 14 distances were defined at three-dimensional virtual reality models of the skulls at the same workstation.

Genes proximal and distal to MYCN are highly expressed in human neuroblastoma as visualized by comparative expressed sequence hybridization.

MYCN amplification is associated with poor prognosis in neuroblastoma disease. To improve our understanding of the influence of the MYCN amplicon and its corresponding expression, we investigated the 2p expression pattern of MYCN amplified (n = 13) and nonamplified (n = 4) cell lines and corresponding primary tumors (n = 3) using the comparative expressed sequence hybridization technique. All but one MYCN amplified cell line displayed overexpression at 2p.

Expression patterns of Ets2 protein correlate with bone-specific proteins in cell-seeded three-dimensional bone constructs.

The transcription factor Ets2 and its transcriptional targets osteopontin (OPN) and osteocalcin (OC) are expressed in tissue-engineered bone constructs in vitro. Up to now little is known about the role of Ets2 in tissue-engineering applications. This study was intended to investigate the hypothesis that protein expression of Ets2 is correlated with the expression of bone-specific proteinsin tissue-engineeredbone constructs.

Accuracy of treatment planning based on stereolithography in computer assisted surgery.

Three-dimensional stereolithographic models (SL models), made of solid acrylic resin derived from computed-tomography (CT) data, are an established tool for preoperative treatment planning in numerous fields of medicine. An innovative approach, combining stereolithography with computer-assisted point-to-point navigation, can support the precise surgical realization of a plan that has been defined on an SL model preoperatively. The essential prerequisites for the application of such an approach are: (1) The accuracy of the SL models (including accuracy of the CT scan and correspondence of the model with the patient's anatomy) and (2) the registration method used for the transfer of the plan from the SL model to the patient (i.

Implant survival in mandibles of irradiated oral cancer patients.

Objective: The aim of this study was to analyze long-term implant survival in the mandible after radiotherapy and radical surgery in oral cancer patients.

Study Design: Between 1990 and 2003, 71 patients (15 females, 56 males; average age 57.8 years, range 16-84.

Complications after zygoma fracture fixation: is there a difference between biodegradable materials and how do they compare with titanium osteosynthesis?

Objective: Biodegradable materials are particularly useful for the fixation of zygomatic fractures. Different systems are commercially available. The aim of this study was to compare the clinical outcome of zygomatic fracture fixation using 3 biodegradable systems and a titanium osteosynthesis system.

Chimerism analysis following nonmyeloablative stem cell transplantation.

Molecular monitoring of hematopoietic chimerism has become a routine diagnostic approach in patients after allogeneic stem cell transplantation. Chimerism testing permits the documentation and surveillance of engraftment and facilitates early detection of impending graft rejection. In patients transplanted for treatment of malignant hematological disorders, monitoring of chimerism can provide an early indication of incipient disease relapse.

Point-to-point computer-assisted navigation for precise transfer of planned zygoma osteotomies from the stereolithographic model into reality.

Purpose: To evaluate the feasibility and accuracy of a new method for planning and realizing zygomatic osteotomies in cases of established post-traumatic deformities using stereolithographic (SL) models and computer assisted navigation.

Patients And Methods: In 5 patients, osteotomy and repositioning of the zygomatic complex was planned using SL models. The desired position of the zygoma in the patient was determined by fixing individualized osteosynthesis plates to predefined screw positions.

Detection and monitoring of virus infections by real-time PCR.

The employment of polymerase chain reaction (PCR) techniques for virus detection and quantification offers the advantages of high sensitivity and reproducibility, combined with an extremely broad dynamic range. A number of qualitative and quantitative PCR virus assays have been described, but commercial PCR kits are available for quantitative analysis of a limited number of clinically important viruses only. In addition to permitting the assessment of viral load at a given time point, quantitative PCR tests offer the possibility of determining the dynamics of virus proliferation, monitoring of the response to treatment and, in viruses displaying persistence in defined cell types, distinction between latent and active infection.

Dysgnathia, orthognathic surgery and spinal posture.

The aim of this study was to evaluate the spine by video rasterstereography before and after orthognathic surgery. Twenty-nine patients (17 patients with a skeletal class III, 7 patients with a skeletal class II, and 5 patients with mandibular asymmetry) were evaluated preoperatively and 1 year postoperatively. Video rasterstereography is a method of back surface measurement and shape analysis using the moire topography.

Bone morphogenetic proteins 5 and 6 stimulate osteoclast generation.

Bone regeneration is required for fracture-healing, and different procedures have been used to promote osteogenesis. Recently, BMP-2 has been shown to induce bone formation in vivo and has been tested in clinical trials. A recent in vitro study evaluated the osteogenic activity of 14 BMPs on osteoblastic progenitor cells with an osteogenic hierarchical model in which BMP-2 and BMP-6 may play an important role in inducing osteoblast differentiation.