Surface strain at the cervical area and fracture strength of flared root canals reinforced using a zirconia tube and glass-fiber post.

Background/purpose: Recently, an effective core build-up system for teeth with flared root canals is needed. This research aimed to evaluate the effect of foundation restorations using a composite resin core with a fiber post reinforced with a zirconia tube for the surface strain at the cervical area and the fracture load of teeth with flared root canals.

Materials And Methods: Bovine teeth were shaped to mimic human premolars with flared root canals and restored using three types of composite resin foundation restorations with each materials described below: a fiber post (FC), a zirconia tube (ZC), a fiber post and zirconia tube (ZFC).

Effects of immersion in 4-methacryloyloxyethyl trimellitate anhydride/methyl methacrylate-tri-n-butyl borane resin-activated liquid on microtensile bond strength of root canal dentin.

Background/purpose: 4-methacryloyloxyethyl trimellitate anhydride/methyl methacrylate-tri-n-butyl borane (4-META/MMA-TBB) resin is used for indirect restorations. We aimed to evaluate effects of immersion in 4-META/MMA-TBB-activated liquid on the bond strength of root canal dentin.

Materials And Methods: We used freshly extracted single-rooted human teeth.

Marginal fit and retention force of zirconia resin-bonded fixed dental prostheses in the posterior region with different designs.

Background/purpose: Retainer debonding of resin-bonded fixed dental prostheses (RBFDPs) is one of the major reasons for their lower survival rates than fixed dental prostheses (FDPs) with full-coverage crowns. Recent advances in milling technology have enabled the fabrication of RBFDPs with complex retainers (D-shaped designs). This study aimed to assess the marginal fit and retention force of zirconia RBFDPs with inlay-, L-, and D-shaped designs to clarify their clinical applications.

Fostering globally competent dental students through virtual team-working, problem-solving and person-centred multi-disciplinary care planning.

Background/purpose: : Development and acquisition of communication, logical thinking, team-building, critical appraisal, critical thinking and person-centred multi-disciplinary care planning must be considered as skill sets and global core competencies for a dental professional. Therefore, an international online study course to foster undergraduate dental students' skill sets in these areas was established and this study aimed to report the perceptions of participants.

Materials And Methods: An international online course consisting of three levels pertaining to the school year was delivered to dental undergraduates of Japan and Thailand from September to December in 2021.

Effect of Method of Removing Caries-Affected Dentin on the Bond Strength of Composite Resin to Root Canal Dentin.

The adhesion of composite resin to caries-affected dentin differs from the adhesion of resin to sound dentin. We evaluated the bond strengths of dual-cure resin composites applied to caries-affected root canal dentin under various clinical conditions and using several caries removal indicators. In the dye stain 1 group, caries were removed to a pale pink stain level using a caries detector.

Fracture strength of flared root canals reinforced using different post and core materials.

Purpose: To examine the fracture strength and fracture mode of flared root canals reinforced with different post and core materials.

Materials And Methods: Forty endodontically treated bovine teeth structured to mimic human mandibular premolars with flared root canals were reinforced with resin composite and glass fiber post (FRC), composite resin (RC), ceramic core (LD), and ceramic core with resin composite reinforcement (RLD), and restored with single zirconia crowns (n = 10 in each group). The fracture strength and mode of the root canals restored with zirconia crown were assessed.

Investigation of stress distribution within an endodontically treated tooth restored with different restorations.

Background/purpose: Recently, metal-free restoration has become the standard in prosthetic treatment. However, it is still unclear which combination is most effective in preventing root fracture and secondary caries. The purpose of this study was to evaluate the influence of different post systems, crown materials, crown thickness and luting agents on the stress distribution around the crown margins, cervical dentin and the tip of the post.

A composite resin core with a new zirconia tube reduces the surface strain at the cervical area of a mandibular molar: A model tooth study.

Purpose: This study aimed to evaluate the surface strain at the cervical area of endodontically treated molars with a large pulp chamber restored using a composite resin core with three different types of core build-up systems.

Methods: Reproduction models of human mandibular molars with prepared post spaces were used in this study. Roots duplicated with a composite resin were used as the experimental teeth.

Novel flapless esthetic procedure for the elimination of extended gingival metal tattoos adjacent to prosthetic teeth: Er:YAG laser micro-keyhole surgery.

Purpose: This article describes a novel, minimally invasive procedure called Er:YAG laser micro-keyhole surgery (EL-MIKS) that removes metal or amalgam tattoos in the gingiva adjacent to prosthetic teeth without gingival deformity and recession. We aimed to evaluate the clinical efficacy of EL-MIKS for removing metal tattoos and present its long-term treatment outcomes.

Methods: The EL-MIKS procedure consists of several steps that are all performed under a microscope.

The investigation of the stress distribution in abutment teeth for connected crowns.

Background/purpose: With the advancement of an over aging society, the average number of remaining teeth has increased. However, these remaining teeth do not always have sufficient alveolar bone support, and sometimes fabricated connected crowns are applied. This study evaluated the influence of crown material, crown thickness, and alveolar bone resorption on the stress distribution within the abutment teeth of connected crowns.

Evaluation of composite resin core with prefabricated polyetheretherketone post on fracture resistance in the case of flared root canals.

The aim of this study was to use polyetheretherketone (PEEK) for the post material and evaluate the fracture load of six restoration patterns in teeth with flared root canals; composite resin core alone (Group R); glass fiber sleeve (Group S); PEEK post (Group P); glass fiber post (Group F); PEEK post in glass fiber sleeve (Group PS); glass fiber post in glass fiber sleeve (Group FS). In this study, cylindroid specimens were prepared and underwent three-point-bending test in a steady condition and after water immersion. In the loading test, the materials in clinical conditions using bovine teeth were evaluated.

The effect of glass fiber posts and ribbons on the fracture strength of teeth with flared root canals restored using composite resin post and cores.

Purpose: This study evaluated the fracture strength and mode of failure of structurally compromised teeth with flared root canals restored using composite resin with four different systems.

Methods: Sixty endodontically treated bovine teeth were uniformly shaped to simulate human mandibular premolars with flared root canals. The roots were divided into four groups of 15 specimens each based on the type of restoration: composite resin core only (control), glass fiber post, cylindroid glass fiber ribbons, and glass fiber post and ribbons.

The effects of post and core material combination on the surface strain of the 4-unit zirconia fixed partial denture margins.

The suitability of various post and core materials for the 4-unit zirconia fixed partial denture abutment teeth was investigated to lower stress concentration. Artificial mandibular teeth (44 and 47) were used as the abutment teeth. There were two types of posts and cores: resin composite with glass fiber posts (RC), and cast platinum gold alloy (MC).

Dentin Bonding Durability of Two-step Self-etch Adhesives with Improved of Degree of Conversion of Adhesive Resins.

Purpose: To evaluate (1) the initial and long-term microtensile bond strengths of two-step self-etch adhesives with different degrees of conversion (DC); (2) the elastic modulus of the respective adhesive resins; (3) the water sorption of the respective adhesive resins.

Materials And Methods: Two two-step self-etch adhesives, Clearfil SE Bond (CSE) and Clearfil SE Bond 2 (CSE2) were used in this study. The DC was determined using ATR/FT-IR with a time-based spectrum analysis.

Influence of water immersion on the mechanical properties of fiber posts.

Purpose: The purpose of this study was to evaluate the influence of water immersion on the mechanical properties of three kinds of glass fiber posts and the fracture resistance of structures using resin composites with glass fiber posts.

Methods: Each post was divided into three groups; a control group and two water immersion groups (30 and 90 days). Flexural strength was determined by three-point bending test.

Influence of post and core materials on distortion around 4-unit zirconia bridge margins.

The purpose of this study was to evaluate the surface strain of zirconia fixed partial denture frameworks and their abutment roots when restored with two types of post and core materials. Artificial mandibular first premolars and second molars were used as the abutment teeth. Posts and cores were of two types: resin composite with glass fiber posts (RC) and cast platinum gold alloy (MC).

Measurement of the remaining dentin thickness using optical coherence tomography for crown preparation.

This study aimed to investigate the maximum depth imaging and optical properties of the dentin near the pulp by using optical coherence tomography (OCT) and to explore the possibility of measuring the remaining dentin thickness (RDT). Human third molars were used. In experiment 1, the cuspal dentin blocks (0.

Effect of thickness of zirconia-ceramic crown frameworks on strength and fracture pattern.

The aim of the present study was to evaluate the fracture load and fracture mode of thin Ceria-stabilized tetragonal zirconia polycrystals/Al(2)O(3 )nanocomposites (Ce-TZP/A) and Yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) crown frameworks. Artificial maxillary second premolars were prepared for metal-ceramic crown and all-ceramic crown restorations and Co-Cr tooth analogs were duplicated. 10 standard (0.

Influence of the flexural modulus of prefabricated and experimental posts on the fracture strength and failure mode of composite resin cores.

The purpose of this study was to evaluate the influence of flexural modulus of non-metal posts on the fracture strength and failure mode of composite resin cores. Thirty-two human premolars were divided into four groups: prefabricated glass fiber post with 1.0 mm diameter and composite resin core (Group PE1.

Effect of bonded area and/or fiber post placement on the fracture strengths of resin-core reconstructions for pulpless teeth.

Purpose: To compare the fracture strengths of pulpless teeth restored using resin cores with and without fiber posts, and with and without bonding adhesive in the post cavity.

Methods: Human extracted roots were prepared with post cavities and divided into four experimental groups: Groups 1 and 2--after application of adhesive to both the top surface of the root and the inner surface of the post cavity, DC core Automix was injected into the post space with or without fiber-post placement; Groups 3 and 4--adhesive was applied to the top surface of the root only, with or without post placement. Resin-cores were then built-up.

Effect of reinforcement with resin composite on fracture strength of structurally compromised roots.

This study was aimed at evaluating the fracture resistance of structurally compromised roots restored with four different post and core systems. Thirty-two bovine roots were uniformly shaped to simulate human mandibular premolar roots. The roots were divided into four groups based on the type of restoration: cemented cast post and core (Group MC), resin composite build-up (Group CR), resin composite and prefabricated glass fiber post build-up (Group FRC), and thick-layer dual-cured resin composite-reinforced small-diameter tapered cast post and core (Group CRM).

Photoelastic stress analysis of different post and core restoration methods.

The aim of this study was to compare three types of post and core systems by analyzing the stress magnitude within the root. To this end, two-dimensional photoelastic simulation models of endodontically treated maxillary central incisors were fabricated. Three different types of post and core systems were selected for this study: composite resin post and core, composite resin core in combination with a glass fiber post, and conventional cast metal post and core.

Investigation of distortions around the cervical area of teeth restored with two kinds of crown materials.

The purpose of this study was to identify crown materials to decrease the stress concentrated at the cervical area of endodontically treated teeth. To this end, 14 extracted human mandibular premolars were divided into two groups for this study: complete cast crowns versus polymer-based crown and bridge material crowns. Both complete cast crowns (MC) and polymer-based crown and bridge material crowns (HC) were cemented with a glycidyl methacrylate-based resin cement (RC) to composite resin cores with glass fiber posts.

Stress distribution in roots restored with different types of post systems with composite resin.

Although composite resin core is used with various types of prefabricated posts, it remains unclear which kind of material is most suitable for the post. The aim of this study was to evaluate the influence of prefabricated posts on the stress distribution within the root by finite element analysis. Posts and cores were built up with composite resin and four types of prefabricated posts: two types of glass fiber posts (GFP1, GFP2) with low and high Young's moduli, a titanium post (TIP), and a stainless steel post (SSP).

Investigation of stress distribution in roots restored with different crown materials and luting agents.

The purpose of this study was to identify crown materials and luting agents that would decrease the stress concentrated at the roots of endodontically treated teeth. To this end, natural tooth model (NT), full cast crown model (gold-silver-palladium alloy; MC), polymer-based restorative material crown model (HCC), and all-ceramic crown model (ACC) were constructed. In each model, methyl methacrylate-based resin cement (MMA) and composite cement (CC) were used as luting agents.