Adherence of SARS-CoV-2 Seroepidemiologic Studies to the ROSES-S Reporting Guideline During the COVID-19 Pandemic.

Background: Complete reporting of seroepidemiologic studies is critical to their utility in evidence synthesis and public health decision making. The Reporting of Seroepidemiologic studies-SARS-CoV-2 (ROSES-S) guideline is a checklist that aims to improve reporting in SARS-CoV-2 seroepidemiologic studies. Adherence to the ROSES-S guideline has not yet been evaluated.

3D-printed, citrate-based bioresorbable vascular scaffolds for coronary artery angioplasty.

Fully bioresorbable vascular scaffolds (BVSs) aim to overcome the limitations of metallic drug-eluting stents (DESs). However, polymer-based BVSs, such as Abbott's Absorb, the only US FDA-approved BVS, have had limited use due to increased strut thickness (157 μm for Absorb), exacerbated tissue inflammation, and increased risk of major cardiac events leading to inferior clinical performance when compared to metallic DESs. Herein we report the development of a drug-eluting BVS (DE-BVS) through the innovative use of a photopolymerizable, citrate-based biomaterial and a high-precision additive manufacturing process.

An integrated geotechnical and geophysical investigation of landslide in Chira town, Ethiopia.

Landslides pose a significant threat to infrastructure, property, and human lives in many regions worldwide, including Chira town in Ethiopia. This study presents an integrated geotechnical and geophysical investigation aimed at identifying the contributing factors to landslides in Chira town, Ethiopia, with a focus on a recent landslide event. The methodology employed a combination of geotechnical and geophysical techniques to comprehensively analyze the landslide problem.

Protective effectiveness of previous SARS-CoV-2 infection and hybrid immunity against the omicron variant and severe disease: a systematic review and meta-regression.

Background: The global surge in the omicron (B.1.1.

3D Printing a Low-Cost Miniature Accommodating Optical Microscope.

This decade has witnessed the tremendous progress in miniaturizing optical imaging systems. Despite the advancements in 3D printing optical lenses at increasingly smaller dimensions, challenges remain in precisely manufacturing the dimensionally compatible optomechanical components and assembling them into a functional imaging system. To tackle this issue, the use of 3D printing to enable digitalized optomechanical component manufacturing, part-count-reduction design, and the inclusion of passive alignment features is reported here, all for the ease of system assembly.

In situ formation of micro/nano phase composite for 3D printing clinically relevant bioresorbable stents.

With recent developments in materials engineering and additive manufacturing, the feasibility of patient-specific biomedical devices has increased substantially. Bioresorbable vascular stents/scaffolds (BVS), implants which reopen narrowed blood vessels, have seen considerable research in freeform fabrication as one such potentially customizable medical device. However, clinical requirements for stents place significant limits on manufacturing; the device must maintain the vessel's natural diameter once it has been reopened and must have sub-100 μm radial thickness to allow proper blood flow in small diameter vessels.

Global SARS-CoV-2 seroprevalence from January 2020 to April 2022: A systematic review and meta-analysis of standardized population-based studies.

Background: Our understanding of the global scale of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) infection remains incomplete: Routine surveillance data underestimate infection and cannot infer on population immunity; there is a predominance of asymptomatic infections, and uneven access to diagnostics. We meta-analyzed SARS-CoV-2 seroprevalence studies, standardized to those described in the World Health Organization's Unity protocol (WHO Unity) for general population seroepidemiological studies, to estimate the extent of population infection and seropositivity to the virus 2 years into the pandemic.

Methods And Findings: We conducted a systematic review and meta-analysis, searching MEDLINE, Embase, Web of Science, preprints, and grey literature for SARS-CoV-2 seroprevalence published between January 1, 2020 and May 20, 2022.

SARS-CoV-2 infection in Africa: a systematic review and meta-analysis of standardised seroprevalence studies, from January 2020 to December 2021.

Introduction: Estimating COVID-19 cumulative incidence in Africa remains problematic due to challenges in contact tracing, routine surveillance systems and laboratory testing capacities and strategies. We undertook a meta-analysis of population-based seroprevalence studies to estimate SARS-CoV-2 seroprevalence in Africa to inform evidence-based decision making on public health and social measures (PHSM) and vaccine strategy.

Methods: We searched for seroprevalence studies conducted in Africa published 1 January 2020-30 December 2021 in Medline, Embase, Web of Science and Europe PMC (preprints), grey literature, media releases and early results from WHO Unity studies.

Metastatic bone disease: Early referral for multidisciplinary care.

It is estimated that more than half of all cancers develop bony metastases, exacting a substantial cost in terms of patient quality of life and healthcare expenses. Prompt diagnosis and management have been shown to reduce morbidity and costs. When a patient with a history of cancer presents with musculoskeletal pain, heightened awareness of the risk of bone metastasis should prompt immediate referral to an orthopedic specialist.

3D-Printed Electroactive Hydrogel Architectures with Sub-100 µm Resolution Promote Myoblast Viability.

3D-printed hydrogel scaffolds functionalized with conductive polymers have demonstrated significant potential in regenerative applications for their structural tunability, physiochemical compatibility, and electroactivity. Controllably generating conductive hydrogels with fine features, however, has proven challenging. Here, micro-continuous liquid interface production (μCLIP) method is utilized to 3D print poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogels.

Soft tissue sarcoma: Recognizing a rare disease.

The recognition of a malignant soft tissue mass can be challenging, given the rarity of soft tissue sarcoma and the extensive overlap between benign and malignant presentations. Awareness of the signs and symptoms of soft tissue sarcoma in primary care practice ensures prompt referral to a sarcoma center for appropriate assessment and treatment to optimize outcomes.

Conformal Geometry and Multimaterial Additive Manufacturing through Freeform Transformation of Building Layers.

3D printing, formally known as additive manufacturing, creates complex geometries via layer-by-layer addition of materials. While 3D printing has been historically perceived as the static addition of build layers, 3D printing is now considered as a dynamic assembly process. In this context, here a new 3D printing process is reported that executes full degree-of-freedom (DOF) transformation (translating, rotating, and scaling) of each individual building layer while utilizing continuous fabrication techniques.

Method for Attaining Dimensionally Accurate Conditions for High-Resolution Three-Dimensional Printing Ceramic Composite Structures Using MicroCLIP Process.

Continuous liquid interface production (CLIP) utilizes projection ultraviolet (UV) light and oxygen inhibition to transform the sequential layered three-dimensional (3D) manufacturing into a continuous fabrication flow with tremendous improved fabrication speed and structure integrity. Incorporating ceramic particles to the photo-curable polymers allows for additive manufacturing of ceramic parts featuring sophisticated geometries, mitigating the difficulties associated with traditional manufacturing processes. The presence of ceramic particles within the ink, however, strongly scatters the incident UV light.

Inducible lung epithelial resistance requires multisource reactive oxygen species generation to protect against bacterial infections.

Pneumonia remains a global health threat, in part due to expanding categories of susceptible individuals and increasing prevalence of antibiotic resistant pathogens. However, therapeutic stimulation of the lungs' mucosal defenses by inhaled exposure to a synergistic combination of Toll-like receptor (TLR) agonists known as Pam2-ODN promotes mouse survival of pneumonia caused by a wide array of pathogens. This inducible resistance to pneumonia relies on intact lung epithelial TLR signaling, and inducible protection against viral pathogens has recently been shown to require increased production of epithelial reactive oxygen species (ROS) from multiple epithelial ROS generators.

Patient reported outcomes in evaluation of chemotherapy toxicity in women with gynecologic malignancies: A pilot study.

Objective: Patient reported outcomes (PRO) relating to treatment toxicities have been demonstrated to reliably evaluate adverse events in clinical trials. We assessed the user satisfaction of implementing a focused PRO questionnaire for patients with gynecologic cancers undergoing chemotherapy.

Methods: Patients with gynecologic cancers undergoing chemotherapy were prospectively identified after IRB approval from April 2017 to August 2017.

Inducible Lung Epithelial Resistance Requires Multisource Reactive Oxygen Species Generation To Protect against Viral Infections.

Viral pneumonias cause profound worldwide morbidity, necessitating novel strategies to prevent and treat these potentially lethal infections. Stimulation of intrinsic lung defenses via inhalation of synergistically acting Toll-like receptor (TLR) agonists protects mice broadly against pneumonia, including otherwise-lethal viral infections, providing a potential opportunity to mitigate infectious threats. As intact lung epithelial TLR signaling is required for the inducible resistance and as these cells are the principal targets of many respiratory viruses, the capacity of lung epithelial cells to be therapeutically manipulated to function as autonomous antiviral effectors was investigated.

High-Speed 3D Printing of Millimeter-Size Customized Aspheric Imaging Lenses with Sub 7 nm Surface Roughness.

Advancements in three-dimensional (3D) printing technology have the potential to transform the manufacture of customized optical elements, which today relies heavily on time-consuming and costly polishing and grinding processes. However the inherent speed-accuracy trade-off seriously constrains the practical applications of 3D-printing technology in the optical realm. In addressing this issue, here, a new method featuring a significantly faster fabrication speed, at 24.

Does Neurofunction Monitoring Enhance Nursing Confidence and Comfort?

Despite advances in the science of sedation and pain assessment, few studies have examined the impact of various assessment tools on nursing confidence. This study examines how bispectral index monitoring impacts nursing confidence in the assessment and comfort in medication administration based on that assessment. In this prospective observational Quality Improvement project, nurses using bispectral index (BIS) and the Richmond Agitation Sedation Scale (RASS) were randomly selected to complete a self-assessment survey intended to measure their personal confidence and comfort regarding care they were providing for a specific patient on the day the survey was completed.

Inducible epithelial resistance protects mice against leukemia-associated pneumonia.

Despite widespread infection prevention efforts, pneumonia remains the leading cause of death among patients with acute leukemia, due to complex disease- and treatment-dependent immune defects. We have reported that a single inhaled treatment with a synergistic combination of Toll-like receptor 2/6 (TLR 2/6) and TLR9 agonists (Pam2-ODN) induces protective mucosal defenses in mice against a broad range of pathogens. As Pam2-ODN-induced protection persists despite depletion of several leukocyte populations, we tested whether it could prevent pneumonia in a mouse model of acute myeloid leukemia (AML) remission induction therapy.

A phantom road experiment reveals traffic noise is an invisible source of habitat degradation.

Decades of research demonstrate that roads impact wildlife and suggest traffic noise as a primary cause of population declines near roads. We created a "phantom road" using an array of speakers to apply traffic noise to a roadless landscape, directly testing the effect of noise alone on an entire songbird community during autumn migration. Thirty-one percent of the bird community avoided the phantom road.

Treatment of meniscal tears: An evidence based approach.

Treatment options for meniscal tears fall into three broad categories; non-operative, meniscectomy or meniscal repair. Selecting the most appropriate treatment for a given patient involves both patient factors (e.g.