The surface symmetry of the substrate plays an important role in the epitaxial high-quality growth of 2D materials; however, in-depth and in situ studies on these materials during growth are still limited due to the lack of effective in situ monitoring approaches. In this work, taking the growth of MoSe as an example, the distinct growth processes on AlO (112¯0) and AlO (0001) are revealed by parallel monitoring using in situ reflectance anisotropy spectroscopy (RAS) and differential reflectance spectroscopy (DRS), respectively, highlighting the dominant role of the surface symmetry. In our previous study, we found that the RAS signal of MoSe grown on AlO (112¯0) initially increased and decreased ultimately to the magnitude of bare AlO (112¯0) when the first layer of MoSe was fully merged, which is herein verified by the complementary DRS measurement that is directly related to the film coverage.
View Article and Find Full Text PDFAnisotropic optoelectronics based on low-symmetry two-dimensional (2D) materials hold immense potential for enabling multidimensional visual perception with improved miniaturization and integration capabilities, which has attracted extensive interest in optical communication, high-gain photoswitching circuits, and polarization imaging fields. However, the reported in-plane anisotropic photocurrent and polarized dichroic ratios are limited, hindering the achievement of high-performance anisotropic optoelectronics. In this study, we introduce novel low-symmetry violet phosphorus (VP) with a unique tubular cross-linked structure into this realm, and the corresponding anisotropic optical and optoelectronic properties are investigated both experimentally and theoretically for the first time.
View Article and Find Full Text PDFThe Gram-negative bacteria secrete an ice-binding protein (IBP), which is a vital bacterial adhesin facilitating the adaptation and survival of the bacteria in the harsh Antarctic environment. The C-terminal region of IBP, known as region V (RV), is the first domain to be exported into the Ca-rich extracellular environment and acts as a folding nucleus for the entire adhesin. However, the mechanisms underlying the secretion and folding of RV remain poorly understood.
View Article and Find Full Text PDFThe nontrivial and rigorous Heaviside phase jump behavior of phase singularities (PSs) empowers exotic topological modes and widely divergent nature compared to neighboring points, which has attracted great attention in condensed matter physics as well as applications in photonics and ultrasensitive sensors. Here we demonstrate the universal existence of a family of topologically protected PSs generated from exciton resonances of single-atom layers. We obtain the PSs by coating the transition metal dichalcogenide (TMDC) monolayers on a nonabsorptive semi-infinite substrate without surface plasmon effect or other assisted resonators, which exploits the benefits of both exciton-dominated enhancement and peculiarities of the singular phase.
View Article and Find Full Text PDFTwo-dimensional (2D) material bubbles, as a straightforward method to induce strain, represent a potentially powerful platform for the modulation of different properties of 2D materials and the exploration of their strain-related applications. Here, we prepare ReS/graphene heterojunction bubbles (ReS/gr heterobubbles) and investigate their strain and interference synergistically modulated optical and electrical properties. We perform Raman and photoluminescence (PL) spectra to verify the continuously varying strain and the microcavity induced optical interference in ReS/gr heterobubbles.
View Article and Find Full Text PDFThe electromagnetic spectrum between microwave and infrared light is termed the "terahertz (THz) gap," of which there is an urgent lack of feasible and efficient room-temperature (RT) THz detectors. Type-II Weyl semimetals (WSMs) have been predicted to host significant RT topological photoresponses in low-frequency regions, especially in the THz gap, well addressing the shortcomings of THz detectors. However, such devices have not been experimentally realized yet.
View Article and Find Full Text PDFThe ability to detect light in photodetectors is central to practical optoelectronic applications, which has been demonstrated in inorganic semiconductor devices. However, so far, the study of polarization-sensitive organic photodetectors, which have unique applications in flexible and wearable electronics, has not received much attention. Herein, the construction of polarization-sensitive photodetectors based on the single crystals of a superior optoelectronic organic semiconductor, 2,6-diphenyl anthracene (DPA), is demonstrated.
View Article and Find Full Text PDFDue to their low-symmetry lattice characteristics and intrinsic in-plane anisotropy, 2D pentagonal materials, a new class of 2D materials composed entirely of pentagonal atomic rings, are attracting increasing research attention. However, the existence of these 2D materials has not been proven experimentally until the recent discovery of PdSe . Herein, penta-PdPSe, a new 2D pentagonal material with a novel low-symmetry puckered pentagonal structure, is introduced to the 2D family.
View Article and Find Full Text PDFThe yield of a large-area ultra-thin display panel depends on the realization of designed thickness of multilayer films of all pixels. Measuring the thicknesses of multilayer films of a single pixel is crucial to the accurate manufacture. However, the thinnest layer is reaching the sub-20nm level, and different layers feature remarkable divergence in thickness with similar optical constants.
View Article and Find Full Text PDF2D ternary materials exhibit great promise in the field of polarization-sensitive photodetectors due to the low-symmetry crystal structure. However, the realization of ternary material growth is still a huge challenge because of the complex reaction process. Here, for the first time, 2D ternary In SnS flakes are obtained via synergistic additive of salt and molecular sieve-assisted chemical vapor deposition.
View Article and Find Full Text PDFLow-symmetry two-dimensional (2D) semiconductors have attracted great attention because of their rich in-plane anisotropic optical, electrical, and thermoelectric properties and potential applications in multifunctional nanoelectronic and optoelectronic devices. However, anisotropic 2D semiconductors with high performance are still very limited. Here, we report the systematic study of in-plane anisotropic properties in few-layered b-As that is a narrow-gap semiconductor, based on the experimental and theoretical investigations.
View Article and Find Full Text PDFTransparent layers are critical for enhancing optical contrast of graphene on a substrate. However, once the substrate is fully covered by large-area graphene, there are no accurate transparent layer and reference for optical contrast calculations. The thickness uncertainty of the transparent layer reduces the analytical accuracy of graphene.
View Article and Find Full Text PDFStructural symmetry is a simple way to quantify the anisotropic properties of materials toward unique device applications including anisotropic transportation and polarization-sensitive photodetection. The enhancement of anisotropy can be achieved by artificial symmetry-reduction design. A core-shell SbI /Sb O nanowire, a heterostructure bonded by van der Waals forces, is introduced as an example of enhancing the performance of polarization-sensitive photodetectors via symmetry reduction.
View Article and Find Full Text PDFLow-symmetry two-dimensional (2D) materials with unique in-plane anisotropy can promote both fundamental science and practical applications in optics, optoelectronics, electronics, and polarization detection. As a member of 2D materials, doping/alloying material systems have gained great attention owing to the tunable bandgap and special properties. However, the in-plane anisotropic optical and electrical properties of these 2D alloy materials have rarely been reported.
View Article and Find Full Text PDFBeilstein J Nanotechnol
September 2019
[This corrects the article DOI: 10.3762/bjnano.10.
View Article and Find Full Text PDFvan der Waals (vdW) magnetic insulators are of significance in both fundamental research and technological application, but most two-dimensional (2D) vdW magnetic systems are unstable and of high lattice symmetry. Stable 2D vdW magnetic insulators with anisotropic structure are needed to modulate the properties and unlock potential applications. Here we present a stable vdW antiferromagnetic material, CrOCl, with low-symmetry orthorhombic structure, and investigate systematically its magnetism, phase transition behavior, and optical anisotropy.
View Article and Find Full Text PDFBeilstein J Nanotechnol
August 2019
Anisotropic 2D materials exhibit novel optical, electrical and thermoelectric properties that open possibilities for a great variety of angle-dependent devices. Recently, quantitative research on 1T'-WTe has been reported, revealing its fascinating physical properties such as non-saturating magnetoresistance, highly anisotropic crystalline structure and anisotropic optical/electrical response. Especially for its anisotropic properties, surging research interest devoted solely to understanding its structural and optical properties has been undertaken.
View Article and Find Full Text PDFBeilstein J Nanotechnol
February 2019
Real-time monitoring is essential for understanding and precisely controlling of growth of two-dimensional transition metal dichalcogenide (2D TMDC) materials. However, it is very challenging to carry out such studies during chemical vapor deposition (CVD). Here, we report the first, real time, in situ study of the CVD growth of 2D TMDCs.
View Article and Find Full Text PDFMechanical strain induced changes in the electronic properties of two-dimensional (2D) materials is of great interest for both fundamental studies and practical applications. The anisotropic 2D materials may further exhibit different electronic changes when the strain is applied along different crystalline axes. The resulting anisotropic piezoresistive phenomenon not only reveals distinct lattice-electron interaction along different principle axes in low-dimensional materials but also can accurately sense/recognize multidimensional strain signals for the development of strain sensors, electronic skin, human-machine interfaces, etc.
View Article and Find Full Text PDFNanomaterials (Basel)
January 2019
We study computationally the design of a high extinction ratio nano polarizer based on black phosphorus (BP). A scattering-matrix calculation method is applied to compute the overall polarization extinction ratio along two orthogonal directions. The results reveal that, with a resonance cavity of SiO₂, both BP/ SiO 2 /Si and -BN/BP/ SiO 2 /Si configurations can build a linear polarizer with extinction ratio higher than 16 dB at a polarized wavelength in the range of 400 nm⁻900 nm.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2019
Low-symmetry layered two-dimensional (2D) materials with strong in-plane optical anisotropy can potentially be applied for polarization photodetection. This is especially true for those 2D materials with a direct band gap, which can efficiently absorb light with specific axial polarization. However, discovering such new anisotropic 2D materials with a direct band structure is still extremely challenging.
View Article and Find Full Text PDFThe air instability of black phosphorus (BP) severely hinders the development of its electronic and optoelectronic applications. Although a lot of effort has been made to passivate it against degradation in ambient conditions, approaches to further manipulate the properties of passivated BP are still very limited. Herein, we report a simple and low-cost chemical method that can achieve BP passivation and property tailoring simultaneously.
View Article and Find Full Text PDFIn-plane anisotropy of layered materials adds another dimension to their applications, opening up avenues in diverse angle-resolved devices. However, to fulfill a strong inherent in-plane anisotropy in layered materials still poses a significant challenge, as it often requires a low-symmetry nature of layered materials. Here, we report the fabrication of a member of layered semiconducting AB compounds, TlSe, that possesses a low-symmetry tetragonal structure and investigate its anisotropic light-matter interactions.
View Article and Find Full Text PDF