Visible-Light-Driven Hydrogen Production and Polymerization using Triarylboron-Functionalized Iridium(III) Complexes.

The development of novel iridium(III) complexes has continued as an important area of research owing to their highly tunable photophysical properties and versatile applications. In this report, three heteroleptic dimesitylboron-containing iridium(III) complexes, [Ir(p-B-ppy) (N^N)] {p-B-ppy=2-(4-dimesitylborylphenyl)pyridine; N^N=dipyrido[3,2-a:2',3'-c]phenazine (dppz) (1), dipyrido[3,2-d:2',3'-f]quinoxaline (dpq) (2), and 1,10-phenanthroline (phen) (3)}, were prepared and fully characterized electrochemically, photophysically, and computationally. Altering the conjugated length of the N^N ligands allowed us to tailor the photophysical properties of these complexes, especially their luminescence wavelength, which could be adjusted from λ=583 to 631 nm in CH Cl .

The effects of selected parameters on the nitric oxide removal by biofilter.

A bench-scale biofilter was used to demonstrate the treatability of off-gas containing nitric oxide (NO) by examining selected operational parameters. After 6 days of operation, the biofilter reached to a steady state and NO reduction was significant, reducing from 200 ppm to 95 and 40 ppm after 6 and 40 days of continuous operation. The oxygen concentrations in the inlet would affect NO removal performance significantly; as oxygen content decreasing from 6% to 0%, the NO removal efficiency increased from 55% to 99%, indicating that oxygen inhibited the progress of denitrification.

Optimal nonpoint source pollution control strategies for a reservoir watershed in Taiwan.

The purpose of this study is to develop a model for optimal nonpoint source pollution control for the Fei-Tsui Reservoir watershed in Northern Taiwan. Several structural best management practices (BMPs) are selected to treat stormwater runoff. The complete model consists of two interacting components: an optimization model based on discrete differential dynamic programming (DDDP) and a zero-dimensional reservoir water quality model.

Physical and environmental properties of asphalt mixtures containing incinerator bottom ash.

This paper presents parts of the results from a research project sponsored by Taiwan Environmental Protection Administration (TEPA), investigating both the physical and environmental properties of asphalt mixtures using different amount of incinerator bottom ash (IBA) as fine aggregate substitution. The Marshall mix design method was used to determine the design asphalt content and evaluate the potential performance of these IBA-asphalt mixtures. Water sensitivity and wheel track rutting were also performed on these mixtures.

A novel sustainable decision making model for municipal solid waste management.

This paper reviews several models developed to support decision making in municipal solid waste management (MSWM). The concepts underlying sustainable MSWM models can be divided into two categories: one incorporates social factors into decision making methods, and the other includes public participation in the decision-making process. The public is only apprised or takes part in discussion, and has little effect on decision making in most research efforts.

Utilization of water clarifier sludge for copper removal in a liquid fluidized-bed reactor.

A method was used to investigate the potential for using water clarifier sludge to remove copper in a fluidized-bed reactor (FBR). This study was conducted to evaluate the removal of copper in an aquatic system without prior treatment. Chemical analyses of water clarifier sludge through inductively coupled plasma-atomic emission spectrophotometry indicated that silicon, aluminum and iron oxides made up more than 84% of this average composition, similar to the composition of clay.

The potential of recycling and reusing municipal solid waste incinerator ash in Taiwan.

By 2004, there were 19 municipal solid waste incinerators (MSWI) with a total yearly treatment capacity of 7.72 million tons in service in Taiwan. All 19 incinerators operated daily to generate about 1.

Removal of copper (II) by manganese-coated sand in a liquid fluidized-bed reactor.

This study was performed in a fluidized-bed reactor (FBR) filled with manganese-coated sand (MCS) to treat copper-contaminated wastewater. The adsorption characteristics of MCS, the adsorption equilibrium of MCS, and the copper removal capacity by MCS in FBR were investigated. In terms of the adsorption characteristics of MCS, the surface of MCS was evaluated using a scanning electron microscope (SEM).

Removal of Cu(II) from aqueous solution in a fluidized-bed reactor.

In this study, a fluidized-bed reactor (FBR) was employed to treat copper-containing wastewater by mean of copper precipitation on the surface of sand grains. The conditions for optimum copper removal efficiency were also investigated. This technology was controlled so as to keep supersaturation low to induce the nucleated precipitation of copper coating on the sand surface in an FBR.