In vitro inflammatory modulation of bioceramic endodontic sealer in macrophages stimulated by bacterial lipopolysaccharide.

Aim: To evaluate the effects of AH Plus (Dentsply), Sealer 26 (Dentsply), and Sealer Plus BC (Produtos Médicos e Odontológicos) on cytotoxicity and inflammation in macrophage cultures exposed to bacterial lipopolysaccharide (LPS).

Methodology: After initial setting, the sealers were conditioned with serum-free culture medium for 24 h (1 ml/cm ). Macrophages from the RAW 264.

Knowledge, Perception, and Experience of Dentists About Teledentistry.

Objectives: This study aimed to evaluate the level of knowledge, perception, and experience of teledentistry amongst Brazilian dentists with the ongoing COVID-19 pandemic.

Methods: Between June and July 2020, an online questionnaire was used to collect information on the demographic and professional profiles of dentists and their levels of knowledge, perception, and attitudes towards teledentistry. Descriptive statistics were reported as percentages, and Chi-squared test was used to compare responses amongst general practitioners, specialists, and those with varying levels of professional experience.

Effect of canal preparation with XP-endo Shaper and ProTaper Next on root canal geometry and dentin thickness of mandibular premolars with radicular grooves and two canals: a micro-CT study.

Objectives: This study aimed to evaluate the effects of different shaping protocols on the root canal geometry and remaining dentin thickness of mandibular premolars with radicular grooves (RG) and two canals by means of micro-CT.

Materials And Methods: Mandibular premolars with RG and two canals were matched based on their similar morphological dimensions and assigned to 2 experimental groups according to the canal preparation (n=8): XP-endo Shaper (XPS) and ProTaper Next (PTN) systems. Before and after preparation, morphometric measurements of the volume, surface area, structure model index, area, perimeter, roundness, major and minor diameters, as well as untouched canal walls, canal transportation, and dentin wall thickness were evaluated.

Apatite-like forming ability, porosity, and bond strength of calcium aluminate cement with chitosan, zirconium oxide, and hydroxyapatite additives.

This study evaluated the effect of chitosan, zirconium oxide, and hydroxyapatite on the apatite-like forming ability, porosity, and bond-strength of calcium-aluminate cements (C). Three hundred bovine root-slices were assigned to one of five groups, according to the material: MTA, C, C + chitosan (Cchi), C + zirconium oxide (Czio), and C + hydroxyapatite (Chap), and within each group, two subgroups, according to the immersion: deionized water or phosphate-buffered saline (PBS) up to 14 days. Assessments (n = 10) of apatite-like forming ability were performed using scanning-electron microscopy, energy-dispersive x-ray spectroscopy, Fourier-transform infrared spectroscopy, and x-ray diffraction.

Calcium hydroxide paste removal strategies and bond strengths of epoxy- and silicate-based sealers.

This study evaluated the syringe/needle (SN), passive ultrasonic irrigation (PUI) and XP-endo Finisher (XP) in the removal of Ca(OH) -based paste and the bond strength (BS) values of an epoxy resin (AH Plus) and silicate (MTA)-based sealers to root dentin. Eighty lower premolars were assigned: control group (CT), SN, PUI and XP, and subdivided according to the sealer (n = 10) for BS. SN has the lowest removal followed by PUI and XP.

Antibacterial Activity of a New Ready-To-Use Calcium Silicate-Based Sealer.

The aim of this study was to evaluate the antibacterial potential of a calcium silicate-based sealer (Bio-C Sealer, Angelus) against common bacteria in primary and secondary endodontic infections. Enterococcus faecalis, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Streptococcus mutans were exposed to fresh Bio-C Sealer for 24 h by the agar diffusion method (n=5). Additionally, the antibacterial activity was investigated against E.

Comparative Effect of Rotary Microbrush Combined with Different Chemical Irrigants on Root Dentin Microhardness, Roughness and Bond Strength to an Epoxy-based Sealer.

Purpose: This study evaluated the effect of 17% EDTA, 10% citric acid (CA), and 2% chlorhexidine (CHX) activated with a rotary microbrush (CanalBrush) on root dentin microhardness, roughness, and epoxy-based sealer bond strength.

Materials And Methods: One hundred sixty single-rooted bovine incisors were instrumented and divided into 8 groups according to treatment: 1. 17% EDTA; 2.

Chlorhexidine and proanthocyanidin enhance the long-term bond strength of resin-based endodontic sealer.

The aim of this study was to evaluate the effects of proanthocyanidin (PA) and chlorhexidine (CHX) on the bond strength (BS), failure pattern, and resin-dentin interface morphology of the endodontic sealers EndoREZ and AH Plus after 24 h and 6 months of water storage. A total of 120 prepared bovine roots were divided into six groups: AH Plus, CHX+AH Plus, PA+AH Plus, EndoREZ, CHX+EndoREZ, and PA+EndoREZ. Dentin was treated for 1 or 5 min with 2% CHX or 15% PA, respectively.

Effects of EDTA gel and chlorhexidine gel on root dentin permeability.

The aim of this study was to evaluate the effect of 24% ethylenediaminetetraacetic acid (EDTA) gel and 2% chlorhexidine gel (CHX) in dentin permeability and smear layer removal from root canals instrumented with NiTi rotary system using histochemical staining and scanning electron microscopy (SEM) analysis. Overall, 43 premolars were classified into two experimental groups, EDTA (n = 20) and CHX (n = 20), and a negative control (NC) (n = 3). All specimens were instrumented and the irrigant solutions were used after each file change.

Effect of a 12-methacryloyloxy-dodecyl-pyridinium-bromide-containing adhesive with different post types on the long-term bond strength to dentin.

The use of matrix metalloproteinase (MMPs) inhibitors, such as 12-methacryloyloxy-dodecyl-pyridinium-bromide (MDPB), might improve the adhesion of glass-fiber (GF) and polyfiber (PF) posts to root dentine. This study assessed the effect of an MDPB-containing adhesive on the long-term bond strength of GF or PF posts to bovine dentine. Bovine endodontically treated roots were randomly divided into six groups, according to the post type and adhesive system used, as follows: GF serrated post + MDBP-free adhesive; GF serrated post + MDPB-containing adhesive; GF smooth post + MDBP-free adhesive; GF smooth post + MDPB-containing adhesive; PF post + MDBP-free adhesive; PF post + MDPB-containing adhesive.

1064-nm Nd:YAG and 980-nm Diode Laser EDTA Agitation on the Retention of an Epoxy-Based Sealer to Root Dentin.

Root canal irrigants are used to minimize the negative effects of smear layer on endodontic sealer retention. The aim of this study was to evaluate the efficacy of agitation of 17% ethylenediaminetetraacetic acid (EDTA) with ultrasonic, 1064-nm Nd:YAG and 980-nm diode laser on the retention of an epoxy-based sealer to the root canal walls. Forty single-rooted bovine teeth were instrumented with ProTaper rotary system and divided into four groups according to the final irrigation protocol (n = 10): (1) 17% EDTA (control); (2) 17% EDTA with 50-s ultrasonic agitation; (3) 17% EDTA with 50-s diode laser (2-W) agitation; and (4) 17% EDTA with 50-s Nd:YAG (1.

Evaluation of Mechanical Properties of Glass Fiber Posts Subjected to Laser Surface Treatments.

Objective: The aim of this study was to evaluate the influence of laser irradiation on flexural strength, elastic modulus, and surface roughness and morphology of glass fiber posts (GFPs).

Background Data: Laser treatment of GFPs has been introduced to improve its adhesion properties.

Materials And Methods: A total of 40 GFPs were divided into 4 groups according to the irradiation protocol: GC-no irradiation, GYAG-irradiation with erbium:yttrium-aluminum-garnet [Er:YAG], GCR-irradiation with erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG), and GDI-irradiation with diode laser.

Effect of root canal filling techniques on the bond strength of epoxy resin-based sealers.

The aim of this study was to evaluate the effects of different root canal filling techniques on the bond strength of epoxy resin-based sealers. Sixty single-rooted canines were prepared using ProTaper (F5) and divided into the following groups based on the root filling technique: Lateral Compaction (LC), Single Cone (SC), and Tagger Hybrid Technique (THT). The following subgroups (n = 10) were also created based on sealer material used: AH Plus and Sealer 26.

Effect of thermoplastic filling techniques on the push-out strength of root sealing materials.

This study evaluates the effect of two thermoplastic obturation systems (MicroSeal and Obtura II) on bond strength of different sealers to intraradicular dentin. Sixty root canals of human canines were prepared using ProTaper rotary files (crown-down technique) and irrigated with 2.5% sodium hypochlorite and 17% EDTA.

Effect of Nd:YAG (1064-nm) and Diode Laser (980-nm) EDTA Agitation on Root Dentin Ultrastructure Properties.

Objective: The purpose of this study was to analyze the effects of agitation of 17% ethylenediaminetetraacetic acid (EDTA) with 1064 nm Nd:YAG and 980 nm diode laser on root dentin microhardness and superficial roughness (with confocal laser scanning microscopy [CLSM]).

Background Data: Root canal irrigants are used in an attempt to minimize the negative effects of smear layer.

Materials And Methods: Twenty-five bovine roots were sectioned longitudinally and divided into five groups (n=10 each): (1) deionized water, (2) 17% EDTA, (3) 17% EDTA with 60 sec manual agitation, (4) 17% EDTA with 50 sec diode laser (2 W) agitation, and (5) 17% EDTA with 50 sec Nd:YAG (1.

Computed tomography evaluation of rotary systems on the root canal transportation and centering ability.

The endodontic preparation of curved and narrow root canals is challenging, with a tendency for the prepared canal to deviate away from its natural axis. The aim of this study was to evaluate, by cone-beam computed tomography, the transportation and centering ability of curved mesiobuccal canals in maxillary molars after biomechanical preparation with different nickel-titanium (NiTi) rotary systems. Forty teeth with angles of curvature ranging from 20° to 40° and radii between 5.

Quantitative assessment of root canal roughness with calcium-based hypochlorite irrigants by 3D CLSM.

Chemical solutions play important roles in endodontic treatment and promote ultrastructural changes in dentin surface. The aim of this study was to quantify root canal roughness at different concentrations of calcium hypochlorite (Ca(OCl)2) and sodium hypochlorite (NaOCl) by confocal laser scanning microscopy (CLSM). Fifty-two human mandibular premolars were sectioned and randomly organized into thirteen groups (n=8): saline (control); 1%, 2.

Thermal effects and morphological aspects of varying Er:YAG laser energy on demineralized dentin removal: an in vitro study.

The aim of this study was to evaluate thermal changes, dentin ablation removal capacity, and morphological aspects of sound and demineralized human dentin surface irradiated with different output energies of an erbium: yttrium-aluminium-garnet (Er:YAG) laser. Eighty sound human tooth specimens were assigned into two groups: demineralized dentin and sound dentin (control group). The dentin groups were subdivided into four subgroups (n = 10) according to the irradiation energy used (120, 160, 200, or 250 mJ) at a constant frequency level of 6 Hz, in focused mode, and under refrigeration.

Effect of different irrigation protocols on the radicular dentin interface and bond strength with a metacrylate-based endodontic sealer.

This study assessed the influence of different endodontic chemical substances on the adhesion of the Epiphany SE/Resilon system (with and without resinous solvent) to radicular dentin walls, using the push-out test and scanning electron microscopy (SEM). Forty-eight root canals of human canines were prepared biomechanically with ProTaper rotary files (crown-down technique) and the radicular dentin was treated with either 17% EDTA, 2% chlorhexidine gel (CHX) or 2.5% NaOCl (control).

Nd:YAG laser in occlusal caries prevention of primary teeth: a randomized clinical trial.

Dental caries is still the most prevalent chronic disease affecting human populations. Among the preventive treatments performed, it has been reported that laser irradiation combined with topical fluoride can induce an even greater increase in enamel caries resistance. The aim of this study was to evaluate the Nd:YAG laser, with or without fluoride, in occlusal caries prevention of the primary dentition.

Thermal effects and morphological aspects of human dentin surface irradiated with different frequencies of Er:YAG laser.

This study reports the effects on micromorphology and temperature rise in human dentin using different frequencies of Er:YAG laser. Sixty human dentin fragments were randomly assigned into two groups (n = 30): carious or sound dentin. Both groups were divided into three subgroups (n = 10), according to the Er:YAG laser frequency used: 4, 6, or 10 Hz (energy: 200 mJ; irradiation distance: 12 mm; and irradiation time: 20 s).

Influence of Er:YAG laser frequency on dentin caries removal capacity.

The purposes of this study were to evaluate in vitro the influence of different frequencies of Er:YAG laser on the human dentin caries removal capacity. Thirty fragments obtained from third molars were randomly assigned into three groups (n = 10) according to the laser frequency used: 4, 6, and 10 Hz. The caries lesion (±1 mm deep) was induced before the irradiation by S.

Ablation rate and morphology of superficial and deep dentin irradiated with different Er:YAG laser energy levels.

Objective: In this study we evaluated the ablation rate of superficial and deep dentin irradiated with different Er:YAG laser energy levels, and observed the micromorphological aspects of the lased substrates with a scanning electron microscope (SEM).

Background Data: Little is known about the effect of Er:YAG laser irradiation on different dentin depths.

Materials And Methods: Sixty molar crowns were bisected, providing 120 specimens, which were randomly assigned into two groups (superficial or deep dentin), and later into five subgroups (160, 200, 260, 300, or 360 mJ).

Effect of erbium:yttrium-aluminum-garnet laser energies on superficial and deep dentin microhardness.

This study evaluated the microhardness of superficial and deep dentin irradiated with different erbium:yttrium-aluminum-garnet (Er:YAG) laser energies. Seventy-two molars were bisected and randomly assigned to two groups (superficial dentin or deep dentin) and into six subgroups (160 mJ, 200 mJ, 260 mJ, 300 mJ, 360 mJ, and control). After irradiation, the cavities were longitudinally bisected.