Slow-DEET-Release Mosquito-Repellent System Based on Poly(butylene succinate).

Bio-sourced and biodegradable poly(butylene succinate) (PBS) strands containing up to 40 m% mosquito-repellent ,-diethyl-3-methylbenzamide (DEET) were obtained by extrusion, for an initial evaluation of the DEET evaporation characteristics and the possible application of such strands as biodegradable slow-release repellent-delivery devices. For DEET concentrations up to 20 m%, DEET is entrapped in the semicrystalline spherulitic superstructure of PBS. In contrast, at higher DEET concentrations, the liquid repellent, at least partially, is not fully incorporated in the PBS spherulites rather than segregates to form an own macrophase.

Properties of Mosquito Repellent-Plasticized Poly(lactic acid) Strands.

Poly(lactic acid) (PLA) is an attractive candidate for replacing petrochemical polymers because it is fully biodegradable. This study investigated the potential of PLA as a sustainable and environmentally friendly alternative material that can be developed into commercially viable wearable mosquito repellent devices with desirable characteristics. PLA strands containing DEET and IR3535 were prepared by twin screw extrusion compounding and simultaneously functioned as plasticizers for the polymer.

Mosquito-repellent controlled-release formulations for fighting infectious diseases.

Malaria is a principal cause of illness and death in countries where the disease is endemic. Personal protection against mosquitoes using repellents could be a useful method that can reduce and/or prevent transmission of mosquito-borne diseases. The available repellent products, such as creams, roll-ons, and sprays for personal protection against mosquitoes, lack adequate long-term efficacy.

Melt-Spun Poly(D,L-lactic acid) Monofilaments Containing N,N-Diethyl-3-methylbenzamide as Mosquito Repellent.

Malaria is still a major tropical disease, with Africa particularly burdened. It has been proposed that outdoor protection could aid substantially in reducing the malaria incidence rate in rural African communities. Recently, melt-spun polyolefin fibers containing mosquito repellents have been shown to be promising materials to this end.

Deep eutectic solvents for solid pesticide dosage forms.

Deep eutectic solvents aid the formulation of solid pesticide dosage forms for water-insoluble actives. This was demonstrated by encapsulating Amitraz powder in a low-melting matrix based on the eutectic mixture of urea (32 wt%) and 1,3-dimethylurea. Dissolution in water of melt-cast discs, containing 20 wt% active, led to the rapid release of Amitraz in a finely dispersed form.

Dextrin Nanocomposites as Matrices for Solid Dosage Forms.

Safe application of water-insoluble acaricides requires fast release from solid dosage systems into aquatic environments. Dextrin is a water-soluble form of partially hydrolyzed starch, which may be used as matrix material for these systems if retrogradation can be inhibited by the inclusion of nanofillers. Several glycerol-plasticized thermoplastic dextrin-based nanocomposites were prepared with a twin-screw extrusion-compounding process.

Mosquito repellent thermal stability, permeability and air volatility.

Background: The effectiveness of mosquito repellents, whether applied topically on the skin or released from a wearable device, is determined by the evaporation rate. This is because a repellent has to be present in the form of a vapour in the vicinity of the exposed skin that needs protection. Therefore, gravimetric techniques were used to investigate the direct evaporation of selected liquid repellents, their permeation through polymer films, and their release from a microporous polyethylene matrix.

Malathion-filled trilayer polyolefin film for malaria vector control.

The emergence of pyrethroid resistance in mosquitoes is complicating malaria elimination efforts in Africa and alternative insecticides have to be considered for indoor residual spray. Unfortunately, the high volatility of WHO-approved organophosphate alternatives, e.g.

Bicomponent fibres for controlled release of volatile mosquito repellents.

Core-sheath structured fibres were developed for application as part of an alternative malaria vector control intervention aimed at reducing outdoor malaria transmission. The fibres were prepared by melt spinning of high density polyethylene (HDPE) as sheath and with a concentrate containing volatile N,N-Diethyl-m-toluamide (DEET) in poly(ethylene-co-vinyl acetate) (EVA) as core. The concentrate was prepared by a simple absorption processes to a content up to 40 wt% DEET.

Burn Rate of Calcium Sulfate Dihydrate-Aluminum Thermites.

The energetics of cast calcium sulfate dihydrate-aluminum thermites were investigated. The casts were prepared from water slurries with a solids content below 65 wt %. The base case thermite comprised 60 wt % calcium sulfate dihydrate as the oxidizer with 40 wt % aluminum as fuel.

A promising azeotrope-like mosquito repellent blend.

Topical repellents play a key role in reducing the outdoor transmission of mosquito-borne diseases by reducing human-vector contact. Excellent repellents are available, but there is always room for improvement. This article reports on a particularly effective binary repellent blend of ethyl butylacetylaminopropionate and nonanoic acid.

Kinetic interpretation of log-logistic dose-time response curves.

A Hill-type time-response curve was derived using a single-step chemical kinetics approximation. The rate expression for the transformation is a differential equation that provides an interpolation formula between the logistic growth curve and second order kinetics. The solution is equivalent to the log-logistic cumulative distribution function with the time constant expressed in terms of a kinetic rate constant.

Acceptability and effectiveness of a monofilament, polyethylene insecticide-treated wall lining for malaria control after six months in dwellings in Vhembe District, Limpopo Province, South Africa.

Background: South Africa uses indoor residual spraying (IRS) for vector control in its malaria control programme (MCP). Insecticide-treated wall linings (ITWLs) offer possible advantages over IRS and long-lasting, insecticide-treated nets (LLINs). This study assessed the user acceptability and perceived effectiveness, and the durability, including efficacy through bioassays, of a newly developed, monofilament polyethylene ITWL.

Sustainable malaria control: transdisciplinary approaches for translational applications.

With the adoption of the Global Malaria Action Plan, several countries are moving from malaria control towards elimination and eradication. However, the sustainability of some of the approaches taken may be questionable. Here, an overview of malaria control and elimination strategies is provided and the sustainability of each in context of vector- and parasite control is assessed.

Degradation of insecticides used for indoor spraying in malaria control and possible solutions.

Background: The insecticide dichloro-diphenyl-trichloroethane (DDT) is widely used in indoor residual spraying (IRS) for malaria control owing to its longer residual efficacy in the field compared to other World Health Organization (WHO) alternatives. Suitable stabilization to render these alternative insecticides longer lasting could provide a less controversial and more acceptable and effective alternative insecticide formulations than DDT.

Methods: This study sought to investigate the reasons behind the often reported longer lasting behaviour of DDT by exposing all the WHO approved insecticides to high temperature, high humidity and ultra-violet light.