Determining the Relationship Between Corneal Stiffening and Tissue Dehydration After Corneal Cross-Linking.

Purpose: To quantify corneal cross-linking (CXL)-induced stiffening via mechanical testing to estimate the impact of changes in hydration levels (H) and evaluate depth-dependent tissue hydration after CXL.

Methods: Eighty-three porcine corneal buttons were divided into three groups: Standard protocol CXL (S-CXL), accelerated CXL (A-CXL), and untreated (nonirradiated riboflavin-only) controls. Samples were hydrated or dehydrated to modulate H and dynamic mechanical analyzer compression tests were performed to measure Young's modulus (E).

Tryptophan intrinsic fluorescence from wound healing correlates with re-epithelialization in a rabbit model.

Background: Wound healing monitoring and timely decision-making are critical for wound classification. Tryptophan (Tr) intrinsic fluorescence, detected at 295/340 nm, provides a noninvasive approach for wound assessment. Our previous work demonstrated that this autofluorescence is associated with keratinocytes in a highly proliferative state in vitro.

Carbon monoxide poisoning and phototherapy.

Carbon monoxide (CO) poisoning is a leading cause of poison-related morbidity and mortality worldwide. By binding to hemoglobin and other heme-containing proteins, CO reduces oxygen delivery and produces tissue damage. Prompt treatment of CO-poisoned patients is necessary to prevent acute and long-term complications.

Autofluorescence Excitation Imaging of Nonmelanoma Skin Cancer for Margin Assessment Before Mohs Micrographic Surgery: A Pilot Study.

Background: Autofluorescence photography can detect specific light-tissue interactions and record important pathophysiological changes associated with nonmelanoma skin cancer (NMSC), which has been ascribed to the fluorescence of an aromatic amino acid, tryptophan.

Objective: To assess the impact of a novel, autofluorescence imaging (AFI) device on margin control for NMSCs before Mohs micrographic surgery (MMS) in an effort to decrease overall operating time.

Methods: Before the initial stage of MMS, NMSCs were measured with a 2-mm margin as standard of care (normal margin).

Design Optimization of a Phototherapy Extracorporeal Membrane Oxygenator for Treating Carbon Monoxide Poisoning.

We designed a photo-ECMO device to speed up the rate of carbon monoxide (CO) removal by using visible light to dissociate CO from hemoglobin (Hb). Using computational fluid dynamics, fillets of different radii (5 cm and 10 cm) were applied to the square shape of a photo-ECMO device to reduce stagnant blood flow regions and increase the treated blood volume while being constrained by full light penetration. The blood flow at different flow rates and the thermal load imposed by forty external light sources at 623 nm were modeled using the Navier-Stokes and convection-diffusion equations.

Extracorporeal membrane oxygenators with light-diffusing fibers for treatment of carbon monoxide poisoning: Experiments, mathematical modeling, and performance assessment with unit cells.

Unlabelled: BACKGROUND AND OBJECTIVES: Approximately 50,000 emergency department visits per year due to carbon monoxide (CO) poisoning occur in the United States alone. Tissue hypoxia can occur at very low CO concentration exposures because CO binds with a 250-fold higher affinity than oxygen to hemoglobin. The most effective therapy is 100% hyperbaric oxygen (HBO) respiration.

Methods to Evaluate Changes in Mitochondrial Structure and Function in Cancer.

Mitochondria are regulators of key cellular processes, including energy production and redox homeostasis. Mitochondrial dysfunction is associated with various human diseases, including cancer. Importantly, both structural and functional changes can alter mitochondrial function.

Optical, flow, and thermal analysis of a phototherapy extracorporeal membrane oxygenator for treating carbon monoxide poisoning.

Background: Extracorporeal membrane oxygenators (ECMO) are currently utilized to mechanically ventilate blood when lung or lung and heart function are impaired, like in cases of acute respiratory distress syndrome (ARDS). ARDS can be caused by severe cases of carbon monoxide (CO) inhalation, which is the leading cause of poison-related deaths in the United States. ECMOs can be further optimized for severe CO inhalation using visible light to photo-dissociate CO from hemoglobin (Hb).

Multifunctional patch for use during laser procedures: Optimization and feasibility testing.

Objective: The objective of this study was to develop a patch that can be placed on the skin during laser hair removal and similar procedures, that serves to reduce the laser-induced plume, provides a ready indicator to the laser surgeon of where pulses have been applied, and cools the skin.

Methods: A two-layer patch composed of a cooling hydrogel layer and an indicator layer was optimized and tested ex vivo. The hydrogel was composed of gelatin and glycerin.

Hyperbaric phototherapy augments blood carbon monoxide removal.

Background And Objectives: Carbon monoxide (CO) poisoning is responsible for nearly 50,000 emergency department visits and 1200 deaths per year. Compared to oxygen, CO has a 250-fold higher affinity for hemoglobin (Hb), resulting in the displacement of oxygen from Hb and impaired oxygen delivery to tissues. Optimal treatment of CO-poisoned patients involves the administration of hyperbaric 100% oxygen to remove CO from Hb and to restore oxygen delivery.

Malignant Ascites in Ovarian Cancer: Cellular, Acellular, and Biophysical Determinants of Molecular Characteristics and Therapy Response.

Ascites refers to the abnormal accumulation of fluid in the peritoneum resulting from an underlying pathology, such as metastatic cancer. Among all cancers, advanced-stage epithelial ovarian cancer is most frequently associated with the production of malignant ascites and is the leading cause of death from gynecologic malignancies. Despite decades of evidence showing that the accumulation of peritoneal fluid portends the poorest outcomes for cancer patients, the role of malignant ascites in promoting metastasis and therapy resistance remains poorly understood.

Veno-venous extracorporeal blood phototherapy increases the rate of carbon monoxide (CO) elimination in CO-poisoned pigs.

Background And Objectives: Carbon monoxide (CO) inhalation is the leading cause of poison-related deaths in the United States. CO binds to hemoglobin (Hb), displaces oxygen, and reduces oxygen delivery to tissues. The optimal treatment for CO poisoning in patients with normal lung function is the administration of hyperbaric oxygen (HBO).

Emerging biofabrication approaches for gastrointestinal organoids towards patient specific cancer models.

Tissue engineered organoids are simple biomodels that can emulate the structural and functional complexity of specific organs. Here, we review developments in three-dimensional (3D) artificial cell constructs to model gastrointestinal dynamics towards cancer diagnosis. We describe bottom-up approaches to fabricate close-packed cell aggregates, from the use of biochemical and physical cues to guide the self-assembly of organoids, to the use of engineering approaches, including 3D printing/additive manufacturing and external field-driven protocols.

Multifunctional Nano and Collagen-Based Therapeutic Materials for Skin Repair.

A novel strategy is needed for treating nonhealing wounds, which is able to simultaneously eradicate pathogenic bacteria and promote tissue regeneration. This would improve patient outcome and reduce the number of lower limb amputations. In this work, we present a multifunctional therapeutic approach able to control bacterial infections, provide a protective barrier to a full-thickness wound, and improve wound healing in a clinically relevant animal model.

BEaTS-α an open access 3D printed device for in vitro electromechanical stimulation of human induced pluripotent stem cells.

3D printing was used to develop an open access device capable of simultaneous electrical and mechanical stimulation of human induced pluripotent stem cells in 6-well plates. The device was designed using Computer-Aided Design (CAD) and 3D printed with autoclavable, FDA-approved materials. The compact design of the device and materials selection allows for its use inside cell incubators working at high humidity without the risk of overheating or corrosion.

Noninvasive Assessment of Mycotic Nail Tissue Using an Ultraviolet Fluorescence Excitation Imaging System.

Background And Objectives: Mycological diagnosis of onychomycosis is based on direct microscopy using external fluorophores to visualize fungal tissue in nail samples and agar culture. Ultraviolet fluorescence excitation imaging (u-FEI) has shown potential in monitoring biological processes by exploiting variations in autofluorescence. This study aimed at assessing the potential of a handheld u-FEI system as a practical screening tool for fungal nail infections.

Flow-induced Shear Stress Confers Resistance to Carboplatin in an Adherent Three-Dimensional Model for Ovarian Cancer: A Role for EGFR-Targeted Photoimmunotherapy Informed by Physical Stress.

A key reason for the persistently grim statistics associated with metastatic ovarian cancer is resistance to conventional agents, including platinum-based chemotherapies. A major source of treatment failure is the high degree of genetic and molecular heterogeneity, which results from significant underlying genomic instability, as well as stromal and physical cues in the microenvironment. Ovarian cancer commonly disseminates via transcoelomic routes to distant sites, which is associated with the frequent production of malignant ascites, as well as the poorest prognosis.

Point-of-care detection of neutrophils in live skin microsamples using chemiluminescence.

Many skin diseases are defined by the presence of neutrophils, which are among the first cells to respond to infection and inflammation. Currently, neutrophil identification in the skin is costly and slow. The objectives of the present work are to investigate the feasibility of detecting the presence of neutrophils in live skin microsamples using chemiluminescence and develop a device and procedures that will enable preclinical and clinical investigations.

Endogenous Fluorescence Dissimilarity Assessment of Four Potential Biomarkers of Early Liver Fibrosis by Preservation Media Effect.

Build-up of extracellular matrix in liver fibrosis results in changes on endogenous molecules expression that may be studied through the fluorescence characterization of ex vivo liver samples. To the best of our knowledge, no investigations have provided in-depth evidence and discussion on the changes of the endogenous fluorescence in ex vivo tissue due to the effects of the preservation media. In this work, we contrast and analyze the endogenous fluorescence from tryptophan, vitamin A, hydroxyproline and elastin cross-links potential biomarkers of the liver fibrosis, in in vivo measurements and liver samples preserved on formaldehyde, and two standard preservation media.

Phototherapy and extracorporeal membrane oxygenation facilitate removal of carbon monoxide in rats.

Inhaled carbon monoxide (CO) displaces oxygen from hemoglobin, reducing the capacity of blood to carry oxygen. Current treatments for CO-poisoned patients involve administration of 100% oxygen; however, when CO poisoning is associated with acute lung injury secondary to smoke inhalation, burns, or trauma, breathing 100% oxygen may be ineffective. Visible light dissociates CO from hemoglobin.

Apparatus for Harvesting Tissue Microcolumns.

This manuscript describes the production process for a laboratory apparatus, made from off-the-shelf components, that can be used to collect microcolumns of full-thickness skin tissue. The small size of the microcolumns allows donor sites to heal quickly without causing donor site scarring, while harvesting full-thickness tissue enables the incorporation of all cellular and extracellular components of skin tissue, including those associated with deeper dermal regions and the adnexal skin structures, which have yet to be successfully reproduced using conventional tissue engineering techniques. The microcolumns can be applied directly into skin wounds to augment healing, or they can be used as the autologous cell/tissue source for other tissue engineering approaches.

Mobile phone-based UV fluorescence microscopy for the identification of fungal pathogens.

Background And Objective: Dermatophytes are fungi that cause infections in hair, skin, and nails. Potassium Hydroxide (KOH) microscopy is the most frequently used method for identifying dermatophytes. KOH helps in the visualization of the hyphae as it clears the debris present in the specimen but needs a trained eye for final diagnosis of the infection.

Smartphone imaging of subcutaneous veins.

Objective: The identification of veins by medical personnel is a critical skill that is necessary to draw blood or administer intravenous fluids and medications. Because a normal consumer camera can act as a multispectral imaging apparatus, operating with three broadband detectors, we hypothesized that a standard smartphone camera might be employed for enhanced visualization of veins in human skin.

Study: Video and images of subcutaneous veins were acquired using the rear-facing iSight camera from an iPhone 6, with a fixed aperture of f/2.

Variations in the endogenous fluorescence of rabbit corneas after mechanical property alterations.

Keratoconus is an eye disease in which the cornea progressively deforms due to loss of cornea mechanical rigidity, and thus causes deterioration of visual acuity. Techniques to characterize the mechanical characteristics of the cornea are important to better monitor changes and response to treatments. To investigate the feasibility of using the endogenous fluorescence of cornea for monitoring alterations of its mechanical rigidity, linear tensiometry was used to quantitate stiffness and Young's modulus (YM) after treatments that increase cornea stiffness (collagen photocross-linking) or decrease stiffness (enzymatic digestion).

Passive cooling of cutaneous and subcutaneous tissues using phase changing materials: feasibility study using a numerical model.

In many dermatological applications, lowering the temperature of skin and maintaining specific temperatures for extended periods of time are fundamental requirements for treatment; for example, in targeting adipose tissue and managing cutaneous pain. In this work, we investigate the feasibility of using phase changing materials (PCMs) as an alternative passive, open-loop, heat extraction method for cooling cutaneous and subcutaneous tissues. We used a finite difference parametric approach to model the spatial and temporal progression of the heat transferred from the skin to a PCM in contact with the skin surface.