Highly Efficient Photocatalytic HO Production under Ambient Conditions via Defective InS Nanosheets.

Oxygen and water generating hydrogen peroxide (HO) by optical drive is an extremely promising pathway, and the large amount of oxygen in air and natural sunlight illumination are excellent catalytic conditions. However, the separation efficiency of photogenerated electron-hole pairs greatly limits the photocatalytic efficiency, especially in the absence of sacrificial agents. Here, we report an InS nanosheet with an S vacancy (S-InS).

Preparation and Properties of NaHPO∙12HO/Silica Aerogel Composite Phase Change Materials for Building Energy Conservation.

In this paper, a morphologically stable composite phase change material (CPCM) suitable for use in the field of building energy conservation was developed using NaHPO∙12HO (DHPD) as the phase change material, NaSiO∙9HO (SSNH) as the nucleating agent, and silica aerogel (SA) as the carrier. The results showed that the incorporation of 25 wt% SA resulted in the as-prepared DHPD-SSNH/SA CPCM with a phase change temperature of 30.4 °C, an enthalpy of 163.

Large-Size and Ultrahigh Purity Tungsten with Enhanced Physical Properties via Chemical Vapor Deposition.

Conventional powder metallurgy techniques fail to meet the demands for ultrahigh purity tungsten (UHPW) and scalable component sizes required by the semiconductor industry. In this study, ultrahigh purity (99.999998 wt %) large-size tungsten parts, with an adjustable thickness and a diameter of 350 mm, were prepared via a chemical vapor deposition (CVD) method using ultrahigh purity (99.

Cyclododecane-based high-intactness and clean transfer method for fabricating suspended two-dimensional materials.

The high-intactness and ultraclean fabrication of suspended 2D materials has always been a challenge due to their atomically thin nature. Here, we present a universal polymer-free transfer approach for fabricating suspended 2D materials by using volatile micro-molecule cyclododecane as the transfer medium, thus ensuring the ultraclean and intact surface of suspended 2D materials. For the fabricated monolayer suspended graphene, the intactness reaches 99% for size below 10 µm and suspended size reaches 36 µm.

A rolling-mode triboelectric nanogenerator with multi-tunnel grating electrodes and opposite-charge-enhancement for wave energy harvesting.

In light of the crucial role of marine ecosystems and the escalating environmental conservation challenges, it is essential to conduct marine monitoring to help implement targeted environmental protection measures efficiently. Energy harvesting technologies, particularly triboelectric nanogenerators (TENGs), have great potential for prolonging the lifespan and enhancing the reliability of sensors in remote areas. However, the high internal resistance, low current, and friction-induced abrasion issues of TENGs limit their performance in practical applications.

Natural Deep Eutectic Solvent-Assisted Construction of Silk Nanofibrils/Boron Nitride Nanosheets Membranes with Enhanced Heat-Dissipating Efficiency.

Natural polymer-derived nanofibrils have gained significant interest in diverse fields. However, production of bio-nanofibrils with the hierarchical structures such as fibrillar structures and crystalline features remains a great challenge. Herein, an all-natural strategy for simple, green, and scalable top-down exfoliation silk nanofibrils (SNFs) in novel renewable deep eutectic solvent (DES) composed by amino acids and D-sorbitol is innovatively developed.

Sunlight-powered sustained flight of an ultralight micro aerial vehicle.

Limited flight duration is a considerable obstacle to the widespread application of micro aerial vehicles (MAVs), especially for ultralightweight MAVs weighing less than 10 g, which, in general, have a flight endurance of no more than 10 min (refs. ). Sunlight power is a potential alternative to improve the endurance of ultralight MAVs, but owing to the restricted payload capacity of the vehicle and low lift-to-power efficiency of traditional propulsion systems, previous studies have not achieved untethered sustained flight of MAVs fully powered by natural sunlight.

A Novel PiGF@Diamond Color Converter with a Record Thermal Conductivity for Laser-Driven Projection Display.

High-brightness laser lighting is confronted with crucial challenges in developing laser-excitable color converting materials with effective heat dissipation and super optical performance. Herein, a novel composite of phosphor-in-glass film on transparent diamond (PiGF@diamond) is designed and fabricated via a facile low-temperature co-sintering strategy. The as-prepared LaSiN:Ce (LSN:Ce) PiGF@diamond with well-retained optical properties of raw phosphor shows a record thermal conductivity of ≈599 W m K, which is about 60 times higher than that of currently well-used PiGF@sapphire (≈10 W m K).

DIW-Printed Thermal Management PDMS Composites with 3D Structural Thermal Conductive Network of h-BN Platelets and AlO Nanoparticles.

Electronic devices play an increasingly vital role in modern society, and heat accumulation is a major concern during device development, which causes strong market demand for thermal conductivity materials and components. In this paper, a novel thermal conductive material consisting of polydimethylsiloxane (PDMS) and a binary filler system of h-BN platelets and AlO nanoparticles was successfully fabricated using direct ink writing (DIW) 3D printing technology. The addictive manufacturing process not only endows the DIW-printed composites with various geometries but also promotes the construction of a 3D structural thermal conductive network through the shearing force during the printing process.

Enhancing Ionic Selectivity and Osmotic Energy by Using an Ultrathin Zr-MOF-Based Heterogeneous Membrane with Trilayered Continuous Porous Structure.

Designing a nanofluidic membrane with high selectivity and fast ion transport property is the key towards high-performance osmotic energy conversion. However, most of reported membranes can produce power density less than commercial benchmark (5 W/m), due to the imbalance between ion selectivity and permeability. Here, we report a novel nanoarchitectured design of a heterogeneous membrane with an ultrathin and dense zirconium-based UiO-66-NH metal-organic framework (MOF) layer and a highly aligned and interconnected branched alumina nanochannel membrane.

Thermally Conductive and UV-EMI Shielding Electronic Textiles for Unrestricted and Multifaceted Health Monitoring.

Skin-attachable electronics have garnered considerable research attention in health monitoring and artificial intelligence domains, whereas susceptibility to electromagnetic interference (EMI), heat accumulation issues, and ultraviolet (UV)-induced aging problems pose significant constraints on their potential applications. Here, an ultra-elastic, highly breathable, and thermal-comfortable epidermal sensor with exceptional UV-EMI shielding performance and remarkable thermal conductivity is developed for high-fidelity monitoring of multiple human electrophysiological signals. Via filling the elastomeric microfibers with thermally conductive boron nitride nanoparticles and bridging the insulating fiber interfaces by plating Ag nanoparticles (NPs), an interwoven thermal conducting fiber network (0.

Regulatable Orthotropic 3D Hybrid Continuous Carbon Networks for Efficient Bi-Directional Thermal Conduction.

Vertically oriented carbon structures constructed from low-dimensional carbon materials are ideal frameworks for high-performance thermal interface materials (TIMs). However, improving the interfacial heat-transfer efficiency of vertically oriented carbon structures is a challenging task. Herein, an orthotropic three-dimensional (3D) hybrid carbon network (VSCG) is fabricated by depositing vertically aligned carbon nanotubes (VACNTs) on the surface of a horizontally oriented graphene film (HOGF).

The gut microbiome modulates the impact of Anaerobutyricum soehngenii supplementation on glucose homeostasis in mice.

Background: There is growing interest in the development of next-generation probiotics to prevent or treat metabolic syndrome. Previous studies suggested that may represent a promising probiotic candidate. A recent human study showed that while supplementation is well tolerated and safe, it resulted in variable responses among individuals with a subset of the subjects significantly benefiting from the treatment.

Polyethylene fibers containing directional microchannels for passive radiative cooling.

Passive radiative cooling (PRC) that realizes thermal management without consuming any energy has attracted increasing attention. Unfortunately, polymer fibers with radiative cooling function fabricated a facile, continuous, large-scale and eco-friendly method have been scarcely reported. Herein, polyethylene fibers containing directional microchannels (PFCDM) are facilely fabricated melt extrusion and water leaching.

Using ferrous-oxidizing bacteria to enhance the performance of a pH neutral all-iron flow battery.

Among various redox flow batteries (RFBs), the all-iron RFBs have greater application potential due to high accessibility of electrolytes. However, the potential of microaerobic ferrous-oxidizing bacteria (FeOB) to improve the performance of RFB has been neglected. Here, several experiments were conducted using Fe-diethylenetriaminepentaacetic acid (DTPA)/Na[Fe(CN)] as a redox couple for investigating the enhanced performance by FeOB in this RFB.

Improved Energy Harvesting Ability of Single-Layer Binary Fiber Nanocomposite Membrane for Multifunctional Wearable Hybrid Piezoelectric and Triboelectric Nanogenerator and Self-Powered Sensors.

While wearable self-powered electronic devices have shown promising improvements, substantial challenges persist in enhancing their electrical output and structural performance. In this work, a working mechanism involving simultaneous piezoelectric and triboelectric conversion within a monolayer-structured membrane is proposed. Single-layer binary fiber nanocomposite membranes (SBFNMs) (PVDF/CNT@PAN/CNT, DPCPC) with two distinct interpenetrating nanocomposite fibers were created through co-electrospinning, incorporating multiwalled carbon nanotubes (CNTs) into polyvinylidene fluoride (PVDF) and polyacrylonitrile (PAN), respectively.

Efficient removal of tetracycline hydrochloride through novel Fe/BiOBr/BiWO photocatalyst prepared by dual-strategy under visible-light irradiation.

It is important to investigate whether combining two modification strategies has a synergistic effect on the activity of photocatalysts. In this manuscript, Fe-doped BiOBr/BiWO heterojunctions were synthesized by a one-pot solvothermal method, and excellent photocatalytic performance was obtained for the degradation of tetracycline hydrochloride (TCH) in water without the addition of surfactant. Combining experiments and characterization, the synergistic effect between Fe ion doping and the BiOBr/BiWO heterojunction was elucidated.

Patterned liquid metal embedded in brush-shaped polymers for dynamic thermal management.

Interface thermal resistance has become a crucial barrier to effective thermal management in high-performance electronics and sensors. The growing complexity of operational conditions, such as irregular and dynamic surfaces, demands thermal interface materials (TIMs) to possess high thermal conductivity and soft elasticity. However, developing materials that simultaneously combine soft elasticity and high thermal conductivity remains a challenging task.

NULISA: a proteomic liquid biopsy platform with attomolar sensitivity and high multiplexing.

The blood proteome holds great promise for precision medicine but poses substantial challenges due to the low abundance of most plasma proteins and the vast dynamic range of the plasma proteome. Here we address these challenges with NUcleic acid Linked Immuno-Sandwich Assay (NULISA™), which improves the sensitivity of traditional proximity ligation assays by ~10,000-fold to attomolar level, by suppressing assay background via a dual capture and release mechanism built into oligonucleotide-conjugated antibodies. Highly multiplexed quantification of both low- and high-abundance proteins spanning a wide dynamic range is achieved by attenuating signals from abundant targets with unconjugated antibodies and next-generation sequencing of barcoded reporter DNA.

Standardized Volume Power Density Boost in Frequency-Up Converted Contact-Separation Mode Triboelectric Nanogenerators.

The influence of a mechanical structure's volume increment on the volume power density (VPD) of triboelectric nanogenerators (TENGs) is often neglected when considering surface charge density and surface power density. This paper aims to address this gap by introducing a standardized VPD metric for a more comprehensive evaluation of TENG performance. The study specifically focuses on 2 frequency-up mechanisms, namely, the integration of planetary gears (PG-TENG) and the implementation of a double-cantilever structure (DC-TENG), to investigate their impact on VPD.

Dispersing boron nitride nanosheets with carboxymethylated cellulose nanofibrils for strong and thermally conductive nanocomposite films with improved water-resistance.

BNNS (boron nitride nanosheets)-CNF (cellulose nanofibrils) nanocomposite films have attracted increasing attention for advanced thermal management applications. However, the nanocomposite films reported so far generally suffer from unsatisfactory overall performance, especially for thermal conductivity and tensile strength. In this work, a nanocomposite film with excellent overall performance was prepared by using CCNF1.

Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in SnTe by Alloying with MnSbSe.

The manipulation of defect chemistry is crucial in the design of high-performance thermoelectric materials. Studies have demonstrated that alloying compounds within the I-V-VI family, such as AgSbTe, NaSbTe, etc., can effectively enhance the thermoelectric performance of SnTe by controlling the hole concentration and reducing the lattice thermal conductivity.