A mode-locked random laser generating transform-limited optical pulses.

Ever since the mid-1960's, locking the phases of modes enabled the generation of laser pulses of duration limited only by the uncertainty principle, opening the field of ultrafast science. In contrast to conventional lasers, mode spacing in random lasers is ill-defined because optical feedback comes from scattering centres at random positions, making it hard to use mode locking in transform limited pulse generation. Here the generation of sub-nanosecond transform-limited pulses from a mode-locked random fibre laser is reported.

Lab-in-a-fiber-based integrated particle separation and counting.

An all-fiber integrated device capable of separating and counting particles is presented. A sequence of silica fiber capillaries with various diameters and longitudinal cavities are used to fabricate the component for size-based elasto-inertial passive separation of particles followed by detection in an uninterrupted continuous flow. Experimentally, fluorescent particles of 1 μm and 10 μm sizes are mixed in a visco-elastic fluid and fed into the all-fiber separation component.

Distributed vibration sensor with a lasing phase-sensitive OTDR.

The authors experimentally demonstrate the operation of a lasing phase-sensitive optical time-domain reflectometer (Φ-OTDR) based on random feedback from a sensing fiber. Here, the full output of the laser provides the sensing signal, in contrast to the small backscattered signal measured in a conventional OTDR. In this proof-of-principle demonstration, the laser operates as a distributed vibration sensor with signal-to-noise ratio of 23-dB and 1.

Optical poling by means of electrical corona discharge.

Electrical corona discharge is employed in this work to deposit ions on the surface of an optical fiber, creating a strong electric field that is used for poling. Green laser light propagating in the core frees photocarriers that are displaced by the poling field. The technique presented can induce a higher optical nonlinearity than previously obtained in traditional optical poling with internal metal electrodes.

Twin-core fiber sensor integrated in laser cavity.

In this work, we report on a twin-core fiber sensor system that provides improved spectral efficiency, allows for multiplexing and gives low level of crosstalk. Pieces of the referred strongly coupled multicore fiber are used as sensors in a laser cavity incorporating a pulsed semiconductor optical amplifier (SOA). Each sensor has its unique cavity length and can be addressed individually by electrically matching the periodic gating of the SOA to the sensor's cavity roundtrip time.