Cryo-electron tomography study of the evolution of wormlike micelles to saturated networks and perforated vesicles.

Hypothesis: The formation of micellar aggregates and the changes in their morphology are crucial for numerous practical applications of surfactants. However, a proper structural characterization of complicated micellar nanostructures remains a challenge. This paper demonstrates the advances of cryo-electron tomography (cryo-ET) in revealing the structural characteristics that accompany the evolution of surfactant aggregates.

Hybrid Polymer-Surfactant Wormlike Micelles for Concurrent Use for Oil Recovery and Drag Reduction.

We report on the effect of a hydrocarbon (n-dodecane) on the rheological properties and shapes of the hybrid wormlike micelles (WLMs) of a surfactant potassium oleate with an embedded polymer poly(4-vinylpyridine). With and without hydrocarbon solutions, the hybrid micelles exhibit the same values of viscosity at shear rates typical for hydraulic fracturing (HF) tests, as solutions of polymer-free WLMs. Therefore, similar to WLMs of surfactants, they could be applied as thickeners in HF fluids without breakers.

Salt-Induced Transformations of Hybrid Micelles Formed by Anionic Surfactant and Poly(4-vinylpyridine).

Salt-induced structural transformation of charged hybrid surfactant/polymer micelles formed by potassium oleate and poly(4-vinylpyridine) was investigated by cryo-TEM, SANS with contrast variation, DLS, and 2D NOESY. Cryo-TEM data show, that at small salt concentration beads-on-string aggregates on polymer chains are formed. KCl induces the transformation of those aggregates into rods, which is due to the screening of the electrostatic repulsion between similarly charged beads by added salt.

Modeling Micellar Growth and Branching in Mixtures of Zwitterionic with Ionic Surfactants.

Zwitterionic surfactants are widely applied as drag-reducing or thickening agents because their aggregation patterns may drastically change in response to variations of the system composition or external stimuli, which provides controllable viscoelasticity. For predicting aggregation behavior of surfactant mixtures, classical molecular thermodynamic models have been widely used. Particularly, the results of modeling have been reported for zwitterionic/ionic surfactant mixtures.

Antiseptic Polymer-Surfactant Complexes with Long-Lasting Activity against SARS-CoV-2.

Antiseptic polymer gel-surfactant complexes were prepared by incorporating the low-molecular-weight cationic disinfectant cetylpyridinium chloride into the oppositely charged, slightly cross-linked polymer matrices. Three types of polymers were used: copolymers of acrylamide and sodium 2-acrylamido-2-methylpropane sulfonate; copolymers of acrylamide and sodium methacrylate; copolymers of vinylpyrrolidone and sodium methacrylate. It was shown that the rate of the release of the cationic disinfectant from the oppositely charged polymer gels could be tuned in a fairly broad range by varying the concentration of the disinfectant, the degree of swelling, and degree of cross-linking of the gel and the content/type of anionic repeat units in the polymer matrix.

Cationic Surfactants as Disinfectants against SARS-CoV-2.

The virucidal activity of a series of cationic surfactants differing in the length and number of hydrophobic tails (at the same hydrophilic head) and the structure of the hydrophilic head (at the same length of the hydrophobic n-alkyl tail) was compared. It was shown that an increase in the length and number of hydrophobic tails, as well as the presence of a benzene ring in the surfactant molecule, enhance the virucidal activity of the surfactant against SARS-CoV-2. This may be due to the more pronounced ability of such surfactants to penetrate and destroy the phospholipid membrane of the virus.

Green nanocomposite gels based on binary network of sodium alginate and percolating halloysite clay nanotubes for 3D printing.

Alginate hydrogels with embedded rigid percolating network of halloysite clay nanotubes were evaluated as a novel ink for 3D printing. Hydrophilic alginate macromolecules adsorbing on halloysite stabilize the network of the nanotubes and form their own network of interlaced polymer chains. The effect of halloysite content on the structure and properties of the hydrogels was studied by rheometry, thermogravimetric analysis, FTIR-spectroscopy, dynamic light scattering, transmission electron microscopy, and 3D cryo-electron microscopy.

Printable Alginate Hydrogels with Embedded Network of Halloysite Nanotubes: Effect of Polymer Cross-Linking on Rheological Properties and Microstructure.

Rapidly growing 3D printing of hydrogels requires network materials which combine enhanced mechanical properties and printability. One of the most promising approaches to strengthen the hydrogels consists of the incorporation of inorganic fillers. In this paper, the rheological properties important for 3D printability were studied for nanocomposite hydrogels based on a rigid network of percolating halloysite nanotubes embedded in a soft alginate network cross-linked by calcium ions.

Unmodified Silica Nanoparticles Enhance Mechanical Properties and Welding Ability of Epoxy Thermosets with Tunable Vitrimer Matrix.

Epoxy/silica thermosets with tunable matrix (vitrimers) were prepared by thermal curing of diglycidyl ether of bisphenol A (DGEBA) in the presence of a hardener-4-methylhexahydrophthalic anhydride (MHHPA), a transesterification catalyst-zinc acetylacetonate (ZAA), and 10-15 nm spherical silica nanoparticles. The properties of the resulting material were studied by tensile testing, thermomechanical and dynamic mechanical analysis. It is shown that at room temperature the introduction of 5-10 wt% of silica nanoparticles in the vitrimer matrix strengthens the material leading to the increase of the elastic modulus by 44% and the tensile stress by 25%.

Growth of wormlike micelles of surfactant induced by embedded polymer: role of polymer chain length.

Incorporation of polymer chains into wormlike surfactant micelles, which find a large range of applications, offers the opportunity to modify their structure and properties. In this paper, using spectroscopic, scattering and rheological techniques and computer simulations, we study the incorporation of poly(4-vinylpyridine) of two different molecular weights (MWs) into entangled networks of wormlike surfactant micelles of potassium oleate. Using NMR-spectroscopy we show that, independent of its MW, the polymer incorporates into the core-corona interface of the surfactant micelles.

Chitosan composites with Ag nanoparticles formed in carbonic acid solutions.

Chitosan-based hydrogels with stabilized Ag nanoparticles were synthesized in the aqueous solutions of carbonic acid, i.e. water saturated with CO under pressure in hundreds of bars.

Soft magnetic nanocomposites based on adaptive matrix of wormlike surfactant micelles.

The paper describes a new type of soft magnetic nanocomposite (SMN) based on a transient network of wormlike surfactant micelles with embedded oppositely charged submicron particles of magnetite acting as cross-linking agents. We study the change of the rheological properties of the SMNs with different contents of particles in response to magnetic field. We show that even at low field strengths the system acquires solid-like behavior, which can be attributed to the aggregation of particles into chain-like/column structures.

Impact of Salt Co- and Counterions on Rheological Properties and Structure of Wormlike Micellar Solutions.

Rheological properties of aqueous solutions of long-tailed cationic surfactant erucyl bis-(hydroxyethyl)methylammonium chloride (EHAC) were examined as a function of concentration C of different inorganic salts (KCl, CaCl, and LaCl) at a fixed surfactant concentration of 0.6 wt %. The structural evolution of micelles was followed by small-angle neutron scattering and cryogenic transmission electron microscopy.

Rheological Behavior of Oil-Swollen Wormlike Surfactant Micelles.

We study the rheological properties of wormlike micellar aqueous solutions of an anionic surfactant potassium oleate containing solubilized 1-phenyldodecane. We show that upon increasing the amount of absorbed hydrocarbon the rheological behavior of semidilute micellar solutions changes drastically, showing a sequence of different regimes: (i) a "fast-breaking" entangled regime, when very long micellar chains form a network; (ii) an "unbreakable" entangled regime, when the shortening of the micelles leads to the decrease of their reptation time up to the values close to the breaking time; (iii) an unentangled regime (for the first time evidenced for wormlike micelles), where the micelles are so short that they cannot interlace. Within the entangled regime, an unusual rheological behavior has been discovered, probably characterized by the dominant role of end or bond interchange reactions or "breathing" modes, which leads to a novel hypothesis that hydrocarbon is distributed nonuniformly along the micellar length, thus increasing the probability of micellar breakage at certain points.

Viscoelasticity of smart fluids based on wormlike surfactant micelles and oppositely charged magnetic particles.

Novel viscoelastic smart suspensions based on cationic wormlike micelles (WLMs) of erucylbis(hydroxyethyl)methylammonium chloride and oppositely charged submicron magnetite particles in the presence of added low molecular weight salt were prepared and investigated. The suspensions demonstrate remarkable stability against sedimentation, which can be due to the incorporation of particles into the network of entangled WLMs by linking to energetically unfavorable micellar end-caps. Added particles enhance significantly the viscosity, the plateau modulus, and the relaxation time of the system, acting as additional multifunctional physical cross-links in the micellar network.

How a viscoelastic solution of wormlike micelles transforms into a microemulsion upon absorption of hydrocarbon: new insight.

In this article, we investigate the effect of hydrocarbon addition on the rheological properties and structure of wormlike micellar solutions of potassium oleate. We show that a viscoelastic solution of entangled micellar chains is extremely responsive to hydrocarbons-the addition of only 0.5 wt % n-dodecane results in a drastic drop in viscosity by up to 5 orders of magnitude, which is due to the complete disruption of micelles and the formation of microemulsion droplets.

Dominant role of wormlike micelles in temperature-responsive viscoelastic properties of their mixtures with polymeric chains.

Temperature effects on the rheological properties of viscoelastic solutions containing entangled wormlike micelles of potassium oleate and hydrophobically modified polyacrylamide were studied in a wide range of polymer concentrations. A very pronounced drop of viscosity by four orders of magnitude was observed at heating from 20 to 78 °C both in the presence and in the absence of polymer indicating that the wormlike micelles are mainly responsible for this effect. The highly thermosensitive behavior was attributed to the shortening of micellar chains induced by heating.

Self-assembled networks highly responsive to hydrocarbons.

Rheological studies were performed with aqueous salt solutions of anionic surfactant potassium oleate and its mixtures with hydrophobically modified polyacrylamide. Semidilute solutions of the surfactant in the presence of salt (KCl) demonstrate viscoelastic properties due to the formation of a transient network of entangled wormlike micelles. These systems are highly responsive to hydrocarbons: the addition of n-heptane or n-dodecane reduces the viscosity of solutions by up to 4 to 5 orders of magnitude, thus inducing the transition of a gellike system to a fluid one.