VOC Gas Sensors Based on Zinc Stannate Nanoparticles Decorated with Silver.

Today, air pollution is a global environmental problem. A huge amount of explosive and combustible gas emissions that negatively affect nature and human health. Gas sensors are one of the ways to prevent this impact.

Hybrid Impedimetric Biosensors for Express Protein Markers Detection.

Impedimetric biosensors represent a powerful and promising tool for studying and monitoring biological processes associated with proteins and can contribute to the development of new approaches in the diagnosis and treatment of diseases. The basic principles, analytical methods, and applications of hybrid impedimetric biosensors for express protein detection in biological fluids are described. The advantages of this type of biosensors, such as simplicity and speed of operation, sensitivity and selectivity of analysis, cost-effectiveness, and an ability to be integrated into hybrid microfluidic systems, are demonstrated.

Temperature- and Size-Dependent Photoluminescence of CuInS Quantum Dots.

We present the results of a temperature-dependent photoluminescence (PL) spectroscopy study on CuInS quantum dots (QDs). In order to elucidate the influence of QD size on PL temperature dependence, size-selective precipitation was used to obtain several nanoparticle fractions. Additionally, the nanoparticles' morphology and chemical composition were studied using transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy.

High-Throughput Screening of 3D-Printed Architected Materials Inspired by Crystal Lattices: Procedure, Challenges, and Mechanical Properties.

The search for load-bearing, impact-resistant, and energy-absorbing cellular materials is of central interest in many fields including aerospace, automotive, civil, sports, packaging, and biomedical. In order to achieve the desired characteristic geometry and/or topology, a perspective approach may be used, such as utilization of atomic models as input data for 3D printing of macroscopic objects. In this paper, we suggest a new approach for the development of advanced cellular materials-crystallomorphic design based on selection of perspective crystal structures and modeling of their electron density distribution and utilization of isoelectronic surfaces as a generatrix for 3D-printed cellular materials.

SnO-Based Porous Nanomaterials: Sol-Gel Formation and Gas-Sensing Application.

Porous nanocomposites using two (tin dioxide-silica dioxide) and three (tin dioxide-indium oxide-silica dioxide)-component systems for gas sensors were created with the sol-gel method. To understand some of the physical-chemical processes that occurred during the adsorption of gas molecules on the surface of the produced nanostructures, two models-the Langmuir model and the Brunauer-Emmett-Teller theory-were used to carry out calculations. The results of the phase analysis concerning the interaction between the components during the formation of the nanostructures were obtained through the use of X-ray diffraction, thermogravimetric analysis, the Brunauer-Emmett-Teller technique (to determine the surface areas), the method of partial pressure diagrams in a wide range of temperatures and pressures and the results of the measurement of the nanocomposites' sensitivity.

Self-Organization Effects of Thin ZnO Layers on the Surface of Porous Silicon by Formation of Energetically Stable Nanostructures.

The formation of complex surface morphology of a multilayer structure, the processes of which are based on quantum phenomena, is a promising domain of the research. A hierarchy of pore of various sizes was determined in the initial sample of porous silicon by the atomic force microscopy. After film deposition by spray pyrolysis, ZnO nanoclusters regularly distributed over the sample surface were formed.

Step-By-Step Modeling and Demetallation Experimental Study on the Porous Structure in Zeolites.

The organization of microporous space in zeolites is discussed. A new step-by-step model is proposed that explains the principles of organizing the hierarchy of microporous space at the stage of assembling zeolites from elements of minimal size: a primary building unit, secondary building units, tertiary building units or building polyhedra, a sodalite cage, and a supercage. To illustrate the stepwise hierarchical porous structure of nanomaterials, the following zeolites with small and large micropores have been selected as the model objects: sodalite (SOD, the maximum diameter of a sphere that can enter the pores is 0.

Effect of Carbon Dots Concentration on Electrical and Optical Properties of Their Composites with a Conducting Polymer.

Cqd/pedot: PSS composites were prepared via the hydrothermal method from glucose carbon quantum dots (CQDs) and an aqueous solution of PEDOT:PSS conducting polymer and their electrical and optical properties were investigated. The morphology and structure of these samples were investigated by AFM, SEM, EDX, and EBSD. It was found that the CQDs and CQD/PEDOT:PSS composites had a globular structure with globule sizes of ~50-300 nm depending on the concentration of PEDOT:PSS in these composites.

Thermodynamic Analysis and Experimental Study on the Oxidation of PbX (X = S, Se) Nanostructured Layers.

Heat treatment in an oxygen-containing medium is a necessary procedure in the technology of forming photodetectors and emitters based on lead chalcogenides. Lead chalcogenide layers (PbS, PbSe) were prepared via a chemical bath deposition method. Surface oxidation of lead chalcogenide layers was analyzed using X-ray diffraction and Raman spectroscopy methods, and thermodynamic analysis of the oxidation of PbSe and PbS layers was also performed.

Polyvinylpyrrolidone as a Stabilizer in Synthesis of AgInS Quantum Dots.

A synthesis protocol of polyvinylpyrrolidone-capped AgInS quantum dots in aqueous solution is reported. Nanoparticle morphology and chemical composition were studied by means of TEM, XRD, XPS, and FTIR. The obtained quantum dots were luminescent in the visible range.

Control over the Surface Properties of Zinc Oxide Powders via Combining Mechanical, Electron Beam, and Thermal Processing.

The surface properties of zinc oxide powders prepared using mechanical activation, electron beam irradiation, and vacuum annealing, as well using combinations of these types of treatments, were studied using X-ray photoelectron spectroscopy. The structure of the obtained materials was studied by an X-ray diffraction technique and by scanning electron microscopy. We found that over five hours of grinding in an attritor, the size of nanocrystals decreases from 37 to 21 nm, and microdeformations increase from 0.

Impedance Spectroscopy of Hierarchical Porous Nanomaterials Based on por-Si, por-Si Incorporated by Ni and Metal Oxides for Gas Sensors.

Approaches are being developed to create composite materials with a fractal-percolation structure based on intercalated porous matrices to increase the sensitivity of adsorption gas sensors. Porous silicon, nickel-containing porous silicon, and zinc oxide have been synthesized as materials for such structures. Using the impedance spectroscopy method, it has been shown that the obtained materials demonstrate high sensitivity to organic solvent vapors and can be used in gas sensors.

Improving the Conductivity of the PEDOT:PSS Layers in Photovoltaic Cells Based on Organometallic Halide Perovskites.

Among conductive polymers, PEDOT films find the widest application in electronics. For photovoltaic applications, studies of their optical properties, stability, and electrical conductivity are of greatest interest. However, the PEDOT:PSS transport layers, when used in photovoltaic cells, have a high electrical resistance, which prevents solar cells from increasing their efficiency.

Fractal-Percolation Structure Architectonics in Sol-Gel Synthesis.

It was developed a new technique to assess micro- and mesopores with sizes below a few nanometers. The porous materials with hierarchical fractal-percolation structure were obtained with the sol-gel method. The tetraethoxysilane hydrolysis and polycondensation reactions were performed in the presence of salts as the sources of metal oxides.

Low-Frequency Dielectric Relaxation in Structures Based on Macroporous Silicon with Meso-Macroporous Skin-Layer.

The spectra of dielectric relaxation of macroporous silicon with a mesoporous skin layer in the frequency range 1-10 Hz during cooling (up to 293-173 K) and heating (293-333 K) are presented. Macroporous silicon (pore diameter ≈ 2.2-2.