Laser patterning captured in real-time: surface modifications of multilayer thin-films under nanosecond laser heating.

Controlled wrinkle formation has attracted intensive research interest as a means to modify surface properties. However, most of the currently explored methods rely on mechanically stretching polymer substrates with hard surface coatings, and the application of these methods to different materials is limited. Here, for the first time, we demonstrate laser-assisted periodic wrinkle formation on silicon nitride (SiN) membranes that are coated with titanium (Ti)/nickel (Ni) multilayers.

A Comparative Study of Gallium-, Xenon-, and Helium-Focused Ion Beams for the Milling of GaN.

The milling profiles of single-crystal gallium nitride (GaN) when subjected to focused ion beams (FIBs) using gallium (Ga), xenon (Xe), and helium (He) ion sources were investigated. An experimental analysis via annular dark-field scanning transmission electron microscopy (ADF-STEM) and high-resolution transmission electron microscopy (HRTEM) revealed that Ga-FIB milling yields trenches with higher aspect ratios compared to Xe-FIB milling for the selected ion beam parameters (30 kV, 42 pA), while He-FIB induces local lattice disorder. Molecular dynamics (MD) simulations were employed to investigate the milling process, confirming that probe size critically influences trench aspect ratios.

Introduction of Rare-Earth Oxide Nanoparticles in CNT-Based Nanocomposites for Improved Detection of Underlying CNT Network.

Epoxy resins for adhesive and structural applications are widely employed by various industries. The introduction of high aspect ratio nanometric conductive fillers, i.e.

Anisotropic phase-separated morphology of polymer blends directed by electrically pre-oriented clay platelets.

We describe a general pathway to prepare an anisotropic phase-separated polystyrene (PS) - poly(vinyl methyl ether) (PVME) blend morphology by using electrically pre-orientated clay platelets. The clay platelets were oriented in a PS/PVME blend by means of an externally applied AC electric field while the blend is in one phase. Following orientation step, phase separation of the blends was induced by a temperature jump above their lower critical solution temperature (LCST) in the presence of the oriented clay platelets.

Investigation of laser-induced inter-welding between Au and Ag nanoparticles and the plasmonic properties of welded dimers.

Noble metallic nanoparticles with unique plasmonic properties are useful in a variety of applications including bio-imaging, sensing, cancer therapy, etc. The properties of metallic nanoparticles can be tuned in multiple ways, among which laser welding is a highly efficient method. In this study, laser-induced inter-welding of Ag-Au nanoparticle (NP) dimers was investigated using in situ transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX).

Core-Shell Type Ionic Liquid/Metal Organic Framework Composite: An Exceptionally High CO/CH Selectivity.

Here, we present a new concept of a core-shell type ionic liquid/metal organic framework (IL/MOF) composite. A hydrophilic IL, 1-(2-hydroxyethyl)-3-methylimidazolium dicyanamide, [HEMIM][DCA], was deposited on a hydrophobic zeolitic imidazolate framework, ZIF-8. The composite exhibited approximately 5.

A Discovery of Strong Metal-Support Bonding in Nanoengineered Au-FeO Dumbbell-like Nanoparticles by in Situ Transmission Electron Microscopy.

The strength of metal-support bonding in heterogeneous catalysts determines their thermal stability, therefore, a tremendous amount of effort has been expended to understand metal-support interactions. Herein, we report the discovery of an anomalous "strong metal-support bonding" between gold nanoparticles and "nano-engineered" FeO substrates by in situ microscopy. During in situ vacuum annealing of Au-FeO dumbbell-like nanoparticles, synthesized by the epitaxial growth of nano-FeO on Au nanoparticles, the gold nanoparticles transform into the gold thin films and wet the surface of nano-FeO, as the surface reduction of nano-FeO proceeds.

Migration of Single Iridium Atoms and Tri-iridium Clusters on MgO Surfaces: Aberration-Corrected STEM Imaging and Ab Initio Calculations.

To address the challenge of fast, direct atomic-scale visualization of the migration of atoms and clusters on surfaces, we used aberration-corrected scanning transmission electron microscopy (STEM) with high scan speeds (as little as ∼0.1 s per frame) to visualize the migration of (1) a heavy atom (Ir) on the surface of a support consisting of light atoms, MgO(100), and (2) an Ir3 cluster on MgO(110). Sequential Z-contrast images elucidate the surface transport mechanisms.

Highly Stable Bimetallic AuIr/TiO₂ Catalyst: Physical Origins of the Intrinsic High Stability against Sintering.

It has been a long-lived research topic in the field of heterogeneous catalysts to find a way of stabilizing supported gold catalyst against sintering. Herein, we report highly stable AuIr bimetallic nanoparticles on TiO2 synthesized by sequential deposition-precipitation. To reveal the physical origin of the high stability of AuIr/TiO2, we used aberration-corrected scanning transmission electron microscopy (STEM), STEM-tomography, and density functional theory (DFT) calculations.

Secondary signal imaging (SSI) electron tomography (SSI-ET): A new three-dimensional metrology for mesoscale specimens in transmission electron microscope.

We have demonstrated a new electron tomography technique utilizing the secondary signals (secondary electrons and backscattered electrons) for ultra thick (a few μm) specimens. The Monte Carlo electron scattering simulations reveal that the amount of backscattered electrons generated by 200 and 300keV incident electrons is a monotonic function of the sample thickness and this causes the thickness contrast satisfying the projection requirement for the tomographic reconstruction. Additional contribution of the secondary electrons emitted from the edges of the specimens enhances the visibility of the surface features.

Plasmonic enhanced emissions from cubic NaYF(4):Yb: Er/Tm nanophosphors.

A metal shell was used in this study to provide significant enhancement of the up-converted emission from cubic NaYF(4) nanoparticles, creating a valuable composite material for labeling in biology and other applications - use of the cubic form of the material obviates the need to undertake a high temperature transformation to the naturally more efficient hexagonal phase. The NaYF(4) matrix contained ytterbium sensitizer and an Erbium (Er) or Thulium (Tm) activator. The particle sizes of the as-synthesized nanoparticles were in the range of 20-40 nm with a gold shell thickness of 4-8 nm.

4D scanning transmission ultrafast electron microscopy: Single-particle imaging and spectroscopy.

We report the development of 4D scanning transmission ultrafast electron microscopy (ST-UEM). The method was demonstrated in the imaging of silver nanowires and gold nanoparticles. For the wire, the mechanical motion and shape morphological dynamics were imaged, and from the images we obtained the resonance frequency and the dephasing time of the motion.

Macromolecular structural dynamics visualized by pulsed dose control in 4D electron microscopy.

Macromolecular conformation dynamics, which span a wide range of time scales, are fundamental to the understanding of properties and functions of their structures. Here, we report direct imaging of structural dynamics of helical macromolecules over the time scales of conformational dynamics (ns to subsecond) by means of four-dimensional (4D) electron microscopy in the single-pulse and stroboscopic modes. With temporally controlled electron dosage, both diffraction and real-space images are obtained without irreversible radiation damage.

Towards full-structure determination of bimetallic nanoparticles with an aberration-corrected electron microscope.

To fully understand the properties of functional nanostructures such as catalytic nanoclusters, it is necessary to know the positions of all the atoms in the nanostructure. The catalytic properties of metal nanoclusters can often be improved by the addition of a second metal, but little is known about the role of the different metals in these bimetallic catalysts, or about their interactions with each other and the support material. Here we show that aberration-corrected scanning transmission electron microscopy of supported rhodium-iridium clusters, combined with dynamic multislice image simulations, can identify individual atoms, map the full structure, and determine changes in the positions of metal atoms in sequential images.

Direct imaging of single metal atoms and clusters in the pores of dealuminated HY zeolite.

Zeolites are aluminosilicate materials that contain regular three-dimensional arrays of molecular-scale pores, and they can act as hosts for catalytically active metal clusters. The catalytic properties of such zeolites depend on the sizes and shapes of the clusters, and also on the location of the clusters within the pores. Transmission electron microscopy has been used to image single atoms and nanoclusters on surfaces, but the damage caused by the electron beam has made it difficult to image zeolites.

Quality of graphite target for biological/biomedical/environmental applications of 14C-accelerator mass spectrometry.

Catalytic graphitization for (14)C-accelerator mass spectrometry ((14)C-AMS) produced various forms of elemental carbon. Our high-throughput Zn reduction method (C/Fe = 1:5, 500 degrees C, 3 h) produced the AMS target of graphite-coated iron powder (GCIP), a mix of nongraphitic carbon and Fe(3)C. Crystallinity of the AMS targets of GCIP (nongraphitic carbon) was increased to turbostratic carbon by raising the C/Fe ratio from 1:5 to 1:1 and the graphitization temperature from 500 to 585 degrees C.

Site-isolated iridium complexes on MgO powder: individual Ir atoms imaged by scanning transmission electron microscopy.

Iridium complexes were synthesized on MgO powder by adsorption of Ir(C(2)H(4))(2)(acac) [acac = acetonylacetonate]; images determined by aberration-corrected scanning transmission electron microscopy show individual Ir atoms, demonstrating that the supported complexes were site-isolated.