Repair of fractured metal-ceramic restoration using CAD/CAM technologies. Case report.

Fractures in esthetic ceramic veneering are one of the potential failure modes during prosthetic treatment. Depending on the type of chipping fracture, there are three possible outcomes: replacement, restoration repair, or polishing of the fractured area. Computer-aided design and manufacturing (CAD/CAM) technologies provide new methods to the maintenance and repair of fixed metal-ceramic restorations.

Bonding Efficiency between Artificial Teeth and Denture Base in CAD/CAM and Conventional Complete Removable Dentures.

A common challenge encountered with both traditional and digitally produced dentures involves the extraction of artificial teeth from the denture base. This narrative review seeks to present an updated perspective on the adherence of synthetic teeth for denture base materials, employing diverse methods. Dental technicians often employ chemical approaches and mechanical techniques (including abrasion, laser treatment, and abrasive blasting) to augment the retention of denture teeth.

Assessment of CAD/CAM Fabrication Technologies for Post and Core Restorations-A Narrative Review.

The primary objective of this study is to conduct a comprehensive review of the existing literature that discusses research on post and core restorations, covering aspects such as their composition, manufacturing methods, and clinical effectiveness. The methodology employed in this review encompasses the implementation of a well-defined search strategy, the establishment of criteria for inclusion and exclusion, and the selection of relevant studies to summarize their findings. To gather relevant literature published between 1993 and 2023, the research team conducted separate searches on PubMed, Web of Science, and Embase databases.

Comparative Analysis of the Mechanical Properties and Biocompatibility between CAD/CAM and Conventional Polymers Applied in Prosthetic Dentistry.

Modern media often portray CAD/CAM technology as widely utilized in the fabrication of dental prosthetics. This study presents a comparative analysis of the mechanical properties and biocompatibility of CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) polymers and conventional polymers commonly utilized in prosthetic dentistry. With the increasing adoption of CAD/CAM technology in dental laboratories and practices, understanding the differences in material properties is crucial for informed decision-making in prosthodontic treatment planning.

A 3D-simulation study of the deformation, tension, and stress of 3D-printed and conventional denture base materials after immersion in artificial saliva.

The worldwide application of digital technology has presented dentistry with transformative opportunities. The concept of digital dentures, incorporating computer-aided design (CAD) and computer-aided manufacturing (CAM) techniques, holds the promise of improved precision, customization, and overall patient satisfaction. However, the shift from traditional dentures to their digital counterparts should not be taken lightly, as the intricate interplay between oral physiology, patient comfort, and long-term durability requires thorough examination.

Comparative analysis of tensile strength between three types of retraction cords.

Gingival retraction is the withdrawal of the marginal gingiva away from the tooth. This procedure creates a space between the prepared tooth and the gingival tissues to catch more fine details of the impression material. The most common retraction device used in clinical practice is the retraction cord.

Finegoldia magna and Mucorales molds co-infection in a severe case of SARS-CoV-2 disease.

Introduction: Rhino-orbito-cerebral mucormycosis has been reported as a sequela after coronavirus disease in immunocompromised patients with poorly controlled diabetes mellitus. Most cases have been identified in India, with only 19 reported elsewhere.

Methodology: We herein report the results of clinical, imaging, microbiological, and histopathological studies in an immunocompetent 67-year-old male with rhino-orbital infection by Finegoldia magna and Mucorales molds following severe SARS-CoV-2 disease associated with new-onset decompensated diabetes mellitus.

Application of CAD/CAM technologies and materials for prosthetic restoration of severely damaged teeth-clinical cases.

In cases of severely damaged teeth with limited coronal tooth structure and remaining hard dental tissues subgingivally, a custom-made post-and-core restoration is required. Teeth with non-circular canal space also require this type of restoration because the build-up with pre-fabricated posts could lead to thick cement layer. The development of CAD/CAM technologies widens the range of the materials that can be used for prosthetic restorations.

Clinical and laboratory study of corrosion resistance of a base dental alloy for selective laser melting.

CAD/CAM technologies are becoming widely used for the production of metal ceramic dental restorations. Powder Co-based alloys are developed for selective laser melting. The corrosion resistance of the dental alloy affects the biocompatibility, functional suitability, and longevity of the prosthetic restoration.

A Comparative Analysis of Post-Retraction Changes in Gingival Height after Conventional and Surgical Gingival Displacement: Rotary Curettage, Diode and Er:YAG Laser Troughing.

The aim of the current article is to analyze and compare post-retraction gingival height changes resulting from six different types of gingival-displacement methods, encompassing both conventional and surgical approaches. The study involved a comparative analysis of 263 teeth (consisting of 128 front teeth, 69 premolars, and 66 molars) from 23 patients. For the investigation, three classic retraction methods were utilized, namely the single-cord technique, retraction paste Expasyl, and retraction paste Astringent.

Clinical Evaluation of Corrosion Resistance, Ion Release, and Biocompatibility of CoCr Alloy for Metal-Ceramic Restorations Produced by CAD/CAM Technologies.

Background: CAD/CAM technologies facilitate using powder CoCr alloys to produce metal-ceramic dental restorations. However, base alloys may induce oxidative stress in the oral cavity due to corrosion and ion release. This study evaluated resistance to corrosion and release of metal ions from 3D printed CoCr dental alloy and their effect on oral oxidative stress.

Surgical Treatment of Lung Abscess Due to an Awn Aspiration in a 9-Year-Old Child: A Case Report.

Introduction: Foreign body aspiration is a common condition in the child population and is one of the leading causes of accidental deaths in children. The aspiration of an awn (grass inflorescences) is extremely rare.

Aim Of The Study: This study aims to describe the symptoms, diagnosis, therapeutic difficulties, and results of the aspiration of grass inflorescence.

Fracture resistance of 3-unit monolithic ZrO ceramics FPDs with different preparation designs of the distal abutment - an in-vitro study.

Introduction: Masticatory pressure increases in the distal areas of the dentition. This should be considered when restoring partially edentulous patients with a metal-free fixed partial denture (FPD). An alternative abutment preparation design can be used in order to increase the materials' volume in the most fracture-prone "connector area" of an FPD.

The impact of dental metal restorations on the oral oxidative stress level.

Background: Dental materials may influence the equilibrium between production and destruction of free radicals, thus creating conditions for developing of local or general oxidative stress. Metal ions, emitted from base dental alloys, may cause changes in cell structures and functions. Isoprostane concentration may indicate possible cell damage, caused by free radicals, and can be used for evaluation of the oxidative stress level.

Development and validation of an LC-MS/MS method for determination of 8-iso-prostaglandin f2 Alpha in human saliva.

Background: Increased formation of reactive oxygen species may be caused by the ion release of the metal alloys used in prosthetic dental restorations due to the corrosion process. As products of lipid peroxidation, isoprostanes can be used as a marker for oxidative stress in the body. There are two significant advantages of using isoprostanes as an oxidative stress marker - presence in all fluids in the body and low reactivity.

Intraoperative Radiotherapy with Balloon-Based Electronic Brachytherapy System-A Systematic Review and First Bulgarian Experience in Breast Cancer Patients.

(1) Background: We aimed to analyze currently available studies with intraoperative radiotherapy (IORT) as a choice of treatment where the Xoft Axxent electronic brachytherapy (eBx) system was used as a single-dose irradiation and an exclusive radiotherapy approach at the time of surgery in patients with early breast cancer (EBC). We also compared the results of the systematic review to the Bulgarian experience. (2) Methods and Materials: We performed a systematic review of the studies published before February 2021, which investigate the application of a single-fraction 20 Gy radiation treatment, delivered at the time of lumpectomy in EBC patients with the Xoft Axxent eBx System.

Long-Term Survival and Complete Response to in Breast Cancer Patient With Cutaneous Metastases Only.

Background/aim: Metastatic breast cancer (MBC) represents a wide spectrum of heterogeneous conditions with different secondary spread sites, time to relapse and biology. MBC is still considered an incurable disease despite the fact that survival rates have improved in the last years. Cutaneous metastases are a rare site for metastatic spread and indicate advanced disease.

Histological Gingival Assessment after Conventional and Laser Gingivectomy.

Background: Gingivectomy is a procedure often performed in everyday clinical practice using numerous instruments.

Aim: To evaluate and compare the gingival cut surface after gingivectomy with 6 different surgical instruments - a surgical scalpel, an Er:YAG laser, a CO2 laser, a ceramic bur, an electrocautery device, and a diode laser.

Materials And Methods: Gingivectomy using the above listed instruments was performed in 18 patients.

A case of 5F-ADB / FUB-AMB abuse: Drug-induced or drug-related death?

Synthetic cannabinoids (SCs) belong to the group of new psychoactive substances (NPS) which appear sprayed on herbal mixtures on the "street" drug market and are intended for smoking like marijuana. In the present report we discuss a fatal case of 18-years-old boy, who had smoked SCs since several months and an overuse of SCs during last 48 h of his life has been apprised. The autopsy findings revealed acute respiratory distress syndrome (ARDS).

A rare case with synchronous gastric gastrointestinal stromal tumor, pancreatic neuroendocrine tumor, and uterine leiomyoma.

Background: Although gastrointestinal stromal tumors (GISTs) are the most common mesenchymal tumors of the gastrointestinal tract, they comprise less than 1% of all gastrointestinal tumors. Neuroendocrine tumors (NET) of the gastro-enteropancreatic system are also rare, representing about 2% of all gastrointestinal neoplasms. Pancreatic localization of NET is extremely uncommon-these tumors are only 1-5% of all pancreatic cancers.

Polymorphisms in androgen metabolism genes AR, CYP1B1, CYP19, and SRD5A2and prostate cancer risk and aggressiveness in Bulgarian patients.

Background/aim: The aim of our study was to elucidate the role of polymorphisms in AR, CYP1B1, CYP19, and SRD5A2 genes for prostate cancer (PC) development in Bulgarian patients.

Materials And Methods: We genotyped 246 PC patients and 261 controls (155 with benign prostate hyperplasia and 107 healthy population controls) using direct sequencing, PCR-RFLP, SSCP, and fragment analysis.

Results: The allele and genotype frequencies of most of the studied variants did not differ significantly between cases and controls.

Clinical and prognostic significance of pathological and inflammatory markers in the surgical treatment of locally advanced colorectal cancer.

Background: Locally advanced colorectal cancer (CRC) may vary in its clinical and pathological appearance. It is now accepted that progression of disease in patients with locally advanced CRC is determined not only by local tumor characteristics but also by the immune system and inflammatory response in the body.

Methods: We investigated patients with confirmed CRC who were treated in the surgical clinic at the University Hospital Alexandrovska over a 10-year period and retrospectively evaluated the histological features of the preoperative biopsies and operative specimens removed during radical multivisceral resections.