Lanthanide Atoms Induce Strong Graphene Sheet Distortion When Adsorbed on Stone-Wales Defects.

Local curvature in graphene can enhance its reactivity and catalytic activity and can be induced by the adsorption of certain chemical species. By employing periodic density functional theory (DFT) calculations, we demonstrate that significant local curvature can be systematically observed when lanthanide atoms (the full series from La to Lu) are adsorbed on the Stone-Wales (SW) defect in graphene, contrary to that in defect-free graphene. Despite the typical high coordination numbers of lanthanide species, their hapticity is always η (and not η, η, or η), where Ln atoms are adsorbed on the (7,7) junction, forming relatively short Ln···C separations.

Scanning Tunneling Microscopy Study of Lipoic Acid, Mannose, and cRGD@AuNPs Conjugates.

The functionalization of AuNPs with different biological elements was achieved to investigate their possibility in biomedical applications such as drug delivery, vaccine development, sensing, and imaging. Biofunctionalized AuNPs are pursued for applications such as drug delivery, vaccine development, sensing, and imaging. In this study, AuNPs with diameters of 20 nm were functionalized with lipoic acid, mannose, or the cRGD peptide.

Strong Bending Distortion of a Supercoronene Graphene Model upon Adsorption of Lanthanide Atoms.

Numerous applications of graphene involve quasi-infinite sheets, as well as finite structures with edges, pores, graphene quantum dots, etc. In theoretical studies of adsorption of diverse chemical species, including single atoms, molecules, cations, and anions, graphene usually behaves as a very rigid planar structure. However, we found that when adsorbing lanthanide atoms, finite size structures, represented by the widely used supercoronene model, can undergo considerable distortion, and the degree of distortion depends on the number of unpaired electrons, reaching a maximum for Gd (eight unpaired electrons).

Adsorption of Lanthanide Atoms on Graphene: Similar, Yet Different.

Many theoretical studies address the interaction of different atoms with graphene; however, the relevant information on the adsorption of the lanthanide species remains limited and controversial, creating a gap in this important area of graphene chemistry and physics. By employing periodic density functional theory calculations, we provide the key theoretical information for the entire series from lanthanum to lutetium interacting with defect-free graphene, including the interaction strength and distances, charge and spin of the lanthanide atoms, and comparative features of the density of states. The central lanthanides Gd, Tb, and Dy exhibit the strongest bonding and shortest distances.

Gadolinium-containing carbon nanomaterials for magnetic resonance imaging: Trends and challenges.

Gadolinium-containing carbon nanomaterials are a new class of contrast agent for magnetic resonance imaging. They are characterized by a superior proton relaxivity to any current commercial gadolinium contrast agent and offer the possibility to design multifunctional contrasts. Intense efforts have been made to develop these nanomaterials because of their potential for better results than the available gadolinium contrast agents.

A dispersion-corrected density functional theory study of the noncovalent interactions between nucleobases and carbon nanotube models containing stone-wales defects.

The noncovalent bonding between nucleobases (NBs) and Stone-Wales (SW) defect-containing closed-end single-walled carbon nanotubes (SWNTs) was theoretically studied in the framework of density function theory using a dispersion-corrected functional PBE-G06/DNP. The models employed in this study were armchair nanotube (ANT) (5,5) and zigzag nanotube (ZNT) (10,0), which incorporated SW defects in different orientations. In one of them, the (7,7) junction is tilted with respect to SWNT axis (ANT-t and ZNT-t), whereas in ANT-p and ZNT-p models the (7,7) junction is parallel and perpendicular to the axis, respectively.

Preparation and Characterization of a Novel Organic Semiconductor Indacenedithiophene Derivative and the Corresponding Langmuir-Blodgett Thin Films.

The synthesis of a novel indacenedithiophene derivative (IDT-DPA) is described, which exhibits semiconducting behavior. Its properties were measured by means of UV-visible and fluorescence spectroscopies using toluene as solvent. An extinction molar coefficient of 2.

Carbon Nanotubes and Graphene Promote Pyrolysis of Free-Base Phthalocyanine.

Unsubstituted phthalocyanines (including free-base HPc and many of its metal complexes) are among the most stable organic compounds. They can sublime without decomposition under reduced pressure and temperatures of up to 550 °C. This property was previously employed to design a novel approach to noncovalent functionalization of pristine single-walled carbon nanotubes (SWNTs) with 3d metal(II) phthalocyanine complexes.

One-step nondestructive functionalization of graphene oxide paper with amines.

Direct functionalization of prefabricated free-standing graphene oxide paper (GOP) is the only approach suitable for systematic tuning of its mechanical, thermal and electronic characteristics. However, the traditional liquid-phase functionalization can compromise physical integrity of the paper-like material up to its total disintegration. In the present paper, we attempted to apply an alternative, solvent-free strategy for facile and nondestructive functionalization of GOP with 1-octadecylamine (ODA) and 1,12-diaminododecane (DAD) as representatives of aliphatic amines, and with 1-aminopyrene (AP) and 1,5-diaminonaphthalene (DAN) as examples of aromatic amines.

Computer simulation and experimental self-assembly of irradiated glycine amino acid under magnetic fields: Its possible significance in prebiotic chemistry.

Ionizing radiation may have played a relevant role in chemical reactions for prebiotic biomolecule formation on ancient Earth. Environmental conditions such as the presence of water and magnetic fields were possibly relevant in the formation of organic compounds such as amino acids. ATR-FTIR, Raman, EPR and X-ray spectroscopies provide valuable information about molecular organization of different glycine polymorphs under static magnetic fields.

Solvent-Free Covalent Functionalization of Fullerene C60 and Pristine Multi-Walled Carbon Nanotubes with Crown Ethers.

The goal of the present work was to test the feasibility of simple, one-step and solvent-free covalent functionalization of pristine multi-walled carbon nanotubes (MWNTs) and fullerene C60 (as a model system) with amino-substituted crown ethers, namely, 4'-aminobenzo-15-crown-5 and 4'-aminobenzo-1 8-crown-6. The attachment technique proposed is based on thermal instead of chemical activation, and can be considered as ecologically friendly. The suggested covalent binding mechanism is the nucleophilic addition of amino functionalities of crown ethers to the 6,6 bonds of pyracylene units in the case of C60, and to pentagonal (and probably other) defects of similar nature in the case of pristine MWNTs.

Properties of noncovalent tetraphenylporphine···C60 dyads as studied by different long-range and dispersion-corrected DFT functionals.

The noncovalent dyad of tetraphenylporphine and C60 fullerene (H2TPP···C60) and the tetraphenylporphine dimer (H2TPP···H2TPP) were studied by density functional theory (DFT), using functionals that incorporate empirical dispersion correction (DFT-D), functionals that use a long-range correction (LC) scheme, a hybrid functional (B3LYP) and a highly parametrized empirical exchange-correlation functional (M05-2X). The results were compared to X-ray structures and interaction energies reported in previous experimental and theoretical studies. It was found that B3LYP and CAM-B3LYP functionals fail to reproduce the X-ray structures and binding energies of the TPP···C60 system.

Interaction of a Ni(II) tetraazaannulene complex with elongated fullerenes as simple models for carbon nanotubes.

Nickel(II) complex of 5,14-dihydro-6,8,15,17-tetramethyldibenzo[b,i][1,4,8,11] tetraazacyclotetradecine (NiTMTAA), which can be employed for noncovalent functionalization of carbon nanotubes (CNTs), represents a more complex and interesting case in terms of structure of the resulting nanohybrids, as compared to the related materials functionalized with porphyrins and phthalocyanines. Due to its saddle shape, the NiTMTAA molecule adsorbed can adopt different, energetically non-equivalent orientations with respect to CNT, depending on whether CH3 or C6H4 groups contact the latter. The main goal of the present work was to provide information on the interactions of NiTMTAA with simple single-walled CNT (SWNT) models accessible for dispersion-corrected DFT calculations.

Green chemistry of carbon nanomaterials.

The global trend of looking for more ecologically friendly, "green" techniques manifested itself in the chemistry of carbon nanomaterials. The main principles of green chemistry emphasize how important it is to avoid the use, or at least to reduce the consumption, of organic solvents for a chemical process. And it is precisely this aspect that was systematically addressed and emphasized by our research group since the very beginning of our work on the chemistry of carbon nanomaterials in early 2000s.

Noncovalent functionalization of graphene with a Ni(II) tetraaza[14]annulene complex.

The few-layer graphene, produced by exfoliation of graphite in 4-methylanisole, was noncovalently functionalized with the Ni(ii) complex of 5,7,12,14-tetramethyldibenzo-1,4,8,11-tetraazacyclotetradeca-3,5,7,10,12,14-hexaene (Ni(ii)-tetramethyldibenzotetraaza[14]annulene, or NiTMTAA), which is a simple model of more complex porphyrins and phthalocyanines. The resulting hybrid materials with different content of NiTMTAA were characterized by means of thermogravimetric analysis, scanning and transmission electron microscopy (SEM and TEM, respectively), atomic force microscopy (AFM), energy dispersive X-ray, Fourier-transform infrared (FTIR), Raman and UV-visible spectroscopy, as well as fluorescence and conductivity measurements. Additional information on the mechanisms of NiTMTAA interaction with graphene was obtained from density functional theory (DFT) and molecular mechanics (MM) calculations.

Nanostructured diamine-fullerene derivatives: computational density functional theory study and experimental evidence for their formation via gas-phase functionalization.

Nanostructure derivatives of fullerene C(60) are used in emerging applications of composite matrices, including protective and decorative coating, superadsorbent material, thin films, and lightweight high-strength fiber-reinforced materials, etc. In this study, quantum chemical calculations and experimental studies were performed to analyze the derivatives of diamine-fullerene prepared by the gas-phase solvent-free functionalization technique. In particular, the aliphatic 1,8-diamino-octane and the aromatic 1,5-diaminonaphthalene, which are diamines volatile in vacuum, were studied.

Fullerene thin films functionalized by 1,5-diaminonaphthalene: preparation and properties.

The gas-phase treatment with 1,5-diaminonaphthalene (DAN) is proposed as an efficient way of chemical functionalization of fullerene C60 thin films in order to modify their electronic properties; a temperature of 190 degrees C and reaction time of 4 h were found to be optimal reaction conditions. Two amino groups of DAN add on two neighboring C60 cages, thus producing cross-links in the fullerene phase. The resulting oligomeric and/or polymeric products exhibit a lower solubility in toluene as compared to pristine C60 films.

"Green" functionalization of pristine multi-walled carbon nanotubes with long-chain aliphatic amines.

Short pristine multi-walled carbon nanotubes (MWNTs) were functionalized with a series of long-chain (including polymeric) aliphatic amines, namely octadecylamine (ODA), 1,8-diaminooctane (DO), polyethylene glycol diamine (PEGDA) and polyethylenimine (PEI), via two "green" approaches: (1) gas-phase functionalization (for volatile ODA and DO) and (2) direct heating in the melt (for polymeric PEGDA and PEI). Both of them consist in one-step reaction between MWNTs and amine without the use of organic solvents. The nanostructures obtained were characterized by using infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, atomic force microscopy, and transmission electron microscopy.

Noncovalent interaction of meso-tetraphenylporphine with C60 fullerene as studied by several DFT methods.

We performed density functional theory (DFT) calculations of noncovalently bonded 1:1 complex of meso-tetraphenylporphine H2TPP with fullerene C60. The functionals used were PW91, PBE and BLYP of general gradient approximation (GGA), as well as PWC and VWN of local density approximation (LDA) as implemented in the DMol3 module of Materials Studio package from Accelrys. The computed geometries were compared to the experimental X-ray diffraction data obtained elsewhere for rhombohedral and monoclinic H2TPP + C60 crystalline complexes.

Aggregation of human serum albumin on graphite and single-walled carbon nanotubes as studied by scanning probe microscopies.

Human serum albumin (HSA) is the most abundant protein in blood plasma showing a remarkable ability to bind a broad range of hydrophobic substrates. We employed scanning tunneling microscopy and atomic force microscopy to characterize the morphology of HSA aggregates on highly-ordered pyrolytic graphite (HOPG) and single-walled carbon nanotubes (SWNTs). The morphologies found for albumin aggregates on HOPG are quite different from the ones observed on SWNTs.

Self-assemblies of meso-tetraphenylporphine ligand on surfaces of highly oriented pyrolytic graphite and single-walled carbon nanotubes: insights from scanning tunneling microscopy and molecular modeling.

The self-assembly of porphyrins into highly organized functional arrays supported on appropriate solid substrates is an area of research with multiple potential applications in the "bottom-up" approach to manufacturing. In order to analyze the self-assembly of meso-tetraphenylporphine (H2TPP) on the surfaces of highly oriented pyrolytic graphite (HOPG) and single-walled carbon nanotubes (SWNTs), we performed molecular mechanics modeling (by MM+ force field) and scanning tunneling microscopy (STM) imaging. Molecular modeling predicted an energetic preference of the H2TPP molecules to adsorb in monolayers on the surfaces of graphite and SWNT sidewall, rather than their stacking or separation.

Microwave irradiation of pristine multi-walled carbon nanotubes in vacuum.

The goal of the present paper was to study the behavior of commercially available pristine multi-walled carbon nanotubes (MWNTs) under microwave irradiation (exposures up to 200 s) in vacuum, by means of several experimental techniques. An intense glow and heating of the nanotube samples were observed. Raman spectra, scanning electron microscopy (SEM) and scanning tunneling microscopy (STM) images of the processed nanotubes did not show considerable changes as compared to those for pristine MWNTs.