Sea urchin immune cells and associated microbiota co-exposed to iron oxide nanoparticles activate cellular and molecular reprogramming that promotes physiological adaptation.

The innate immune system is the first player involved in the recognition/interaction with nanomaterials. Still, it is not the only system involved. The co-evolution of the microbiota with the innate immune system built an interdependence regulating immune homeostasis that is poorly studied.

Sulfonated Pentablock Copolymer (Nexar) for Water Remediation and Other Applications.

This review focuses on the use of a sulfonated pentablock copolymer commercialized as Nexar in water purification applications. The properties and the use of sulfonated copolymers, in general, and of Nexar, in particular, are described within a brief reference focusing on the problem of different water contaminants, purification technologies, and the use of nanomaterials and nanocomposites for water treatment. In addition to desalination and pervaporation processes, adsorption and photocatalytic processes are also considered here.

Impact of Doping on Cross-Sectional Stress Assessment of 3C-SiC/Si Heteroepitaxy.

In this paper, we used micro-Raman spectroscopy in cross-section to investigate the effect of different doping on the distribution of stress in the silicon substrate and the grown 3C-SiC film. The 3C-SiC films with a thickness up to 10 μm were grown on Si (100) substrates in a horizontal hot-wall chemical vapor deposition (CVD) reactor. To quantify the influence of doping on the stress distribution, samples were non-intentionally doped (NID, dopant incorporation below 10 cm), strongly n-type doped ([N] > 10 cm), or strongly p-type doped ([Al] > 10 cm).

Sulfonated Pentablock Copolymer Coating of Polypropylene Filters for Dye and Metal Ions Effective Removal by Integrated Adsorption and Filtration Process.

In this work, we coated polypropylene (PP) fibrous filters with sulfonated pentablock copolymer (s-PBC) layers and tested them for the removal of cationic organic dyes, such as methylene blue (MB), and heavy metal ions (Fe3+ and Co2+) from water by adsorption and filtration experiments. Some of the coated filters were irradiated by UV light before being exposed to contaminated water and then were tested with unirradiated filters in the same adsorption and filtration experiments. Polymer-coated filters showed high efficiency in removing MB from an aqueous solution in both absorption and filtration processes, with 90% and 80% removal, respectively.

Impact of Nitrogen on the Selective Closure of Stacking Faults in 3C-SiC.

Despite the promising properties, the problem of cubic silicon carbide (3C-SiC) heteroepitaxy on silicon has not yet been resolved and its use in microelectronics is limited by the presence of extensive defects. In this paper, we used microphotoluminescence (μ-PL), molten KOH etching, and high-resolution scanning transmission electron microscopy (HRSTEM) to investigate the effect of nitrogen doping on the distribution of stacking faults (SFs) and assess how increasing dosages of nitrogen during chemical vapor deposition (CVD) growth inhibits the development of SFs. An innovative angle-resolved SEM observation approach of molten KOH-etched samples resulted in detailed statistics on the density of the different types of defects as a function of the growth thickness of 3C-SiC free-standing samples with varied levels of nitrogen doping.

New Approaches and Understandings in the Growth of Cubic Silicon Carbide.

In this review paper, several new approaches about the 3C-SiC growth are been presented. In fact, despite the long research activity on 3C-SiC, no devices with good electrical characteristics have been obtained due to the high defect density and high level of stress. To overcome these problems, two different approaches have been used in the last years.

Effect of Nitrogen and Aluminum Doping on 3C-SiC Heteroepitaxial Layers Grown on 4° Off-Axis Si (100).

This work provides a comprehensive investigation of nitrogen and aluminum doping and its consequences for the physical properties of 3C-SiC. Free-standing 3C-SiC heteroepitaxial layers, intentionally doped with nitrogen or aluminum, were grown on Si (100) substrate with different 4° off-axis in a horizontal hot-wall chemical vapor deposition (CVD) reactor. The Si substrate was melted inside the CVD chamber, followed by the growth process.

Characterization of 4H- and 6H-Like Stacking Faults in Cross Section of 3C-SiC Epitaxial Layer by Room-Temperature μ-Photoluminescence and μ-Raman Analysis.

We report a comprehensive investigation on stacking faults (SFs) in the 3C-SiC cross-section epilayer. 3C-SiC growth was performed in a horizontal hot-wall chemical vapour deposition (CVD) reactor. After the growth (85 microns thick), the silicon substrate was completely melted inside the CVD chamber, obtaining free-standing 4 inch wafers.

Optical and photocatalytic properties of TiO nanoplumes.

Here we report the photocatalytic efficiency of hydrogenated TiO nanoplumes studied by measuring dye degradation in water. Nanoplumes were synthesized by peroxide etching of Ti films with different thicknesses. Structural characterization was carried out by scanning electron microscopy and transmission electron microscopy.

TiO2-coated nanostructures for dye photo-degradation in water.

The photocatalytic efficiency of a thin-film TiO2-coated nanostructured template is studied by dye degradation in water. The nanostructured template was synthesized by metal-assisted wet etching of Si and used as substrate for the deposition of a thin film of TiO2 (10 nm thick) by atomic layer deposition. A complete structural characterization was made by scanning and transmission electron microscopies.

An enhanced photocatalytic response of nanometric TiO2 wrapping of Au nanoparticles for eco-friendly water applications.

We propose a ground-breaking approach by an upside-down vision of the Au/TiO2 nano-system in order to obtain an enhanced photocatalytic response. The system was synthesized by wrapping Au nanoparticles (∼8 nm mean diameter) with a thin layer of TiO2 (∼4 nm thick). The novel idea of embedding Au nanoparticles with titanium dioxide takes advantage of the presence of metal nanoparticles, in terms of electron trapping, without losing any of the TiO2 exposed surface, so as to favor the photocatalytic performance of titanium dioxide.