An untargeted evaluation of food contact materials by flow injection analysis-mass spectrometry (FIA-MS) combined with independent components analysis (ICA).

Food contact materials (FCMs), especially plastics, are known to be a potential source of contaminants in food. In fact, various groups of additives are used to protect the integrity of the material during processing and life time. However, these intentionally added substances (IAS) could also lead to degradation products called non-intentionally added substances (NIAS), due to reactions occurring in the polymeric material.

Attenuated total reflectance-mid infrared spectroscopy (ATR-MIR) coupled with independent components analysis (ICA): A fast method to determine plasticizers in polylactide (PLA).

Compliance of plastic food contact materials (FCMs) with regulatory specifications in force, requires a better knowledge of their interaction phenomena with food or food simulants in contact. However these migration tests could be very complex, expensive and time-consuming. Therefore, alternative procedures were introduced based on the determination of potential migrants in the initial material, allowing the use of mathematical modeling, worst case scenarios and other alternative approaches, for simple and fast compliance testing.

A comprehensive NMR methodology to assess the composition of biobased and biodegradable polymers in contact with food.

A nuclear magnetic resonance (NMR) methodology was assessed regarding the identification and quantification of additives in three types of polylactide (PLA) intended as food contact materials. Additives were identified using the LNE/NMR database which clusters NMR datasets on more than 130 substances authorized by European Regulation No. 10/2011.

Independent components analysis coupled with 3D-front-face fluorescence spectroscopy to study the interaction between plastic food packaging and olive oil.

Olive oil is one of the most valued sources of fats in the Mediterranean diet. Its storage was generally done using glass or metallic packaging materials. Nowadays, plastic packaging has gained worldwide spread for the storage of olive oil.

Rapid discrimination of plastic packaging materials using MIR spectroscopy coupled with independent components analysis (ICA).

Plastic packaging wastes increased considerably in recent decades, raising a major and serious public concern on political, economical and environmental levels. Dealing with this kind of problems is generally done by landfilling and energy recovery. However, these two methods are becoming more and more expensive, hazardous to the public health and the environment.

Interactions of flavoured oil in-water emulsions with polylactide.

Polylactide (PLA), a biobased polymer, might prove suitable as eco-friendly packaging, if it proves efficient at maintaining food quality. To assess interactions between PLA and food, an oïl in-water model emulsion was formulated containing aroma compounds representing different chemical structure classes (ethyl esters, 2-nonanone, benzaldehyde) at a concentration typically found in foodstuff (100 ppm). To study non-equilibrium effects during food shelf life, the emulsions were stored in a PLA pack (tray and lid).

Chemometric tools to highlight possible migration of compounds from packaging to sunflower oils.

Polyethylene terephthalate (PET) could be considered for the packaging of vegetable oils taking into account the impact of its oxygen permeability on the oxidation of the oil and the migration of volatile organic compounds (VOC) from the polymer matrix. After accelerated aging tests at 40 °C for 10, 20, and 30 days, the headspace of three sunflower oils packed in PET with high density polyethylene caps was carried out using solid phase microextraction. VOCs such as benzene hydrocarbons, ethylbenzene, xylene isomers and diethyl phthalate were identified in vegetable oils by gas chromatography coupled to mass spectrometry.

Chemometric tools to highlight non-intentionally added substances (NIAS) in polyethylene terephthalate (PET).

In an effort to identify non-intentionally added substances (NIAS), which is still a challenging task for analytical chemists, PET pellets, preforms and bottles were analyzed by an optimized headspace solid phase microextraction coupled to gas chromatography-mass spectrometry (HS-SPME/GC-MS). Fingerprints obtained by the proposed method were analyzed by three chemometric tools: Principal Components Analysis (PCA), Independent Components Analysis (ICA) and a multi-block method (Common Components and Specific Weights Analysis CCSWA) in order to extract pertinent variations in NIAS concentrations. Total ion current (TIC) chromatograms were used for PCA and ICA while extracted ion chromatograms (EIC) were used for CCSWA, each ion corresponding to a block.

Local demixion in plasticized polylactide probed by electron spin resonance.

Improving the barrier properties to gas and organic compounds of biosourced polyesters, such as polylactides (PLAs), by increasing their crystallinity has been suggested by several authors. This paper investigates the risk of microphase separation for a technological approach that would involve a plasticization of PLA, to further its crystallization kinetics, with common plasticizers: Acetyl tributyl citrate (ATBC) and Poly(ethylene glycol) (PEG). Overplasticization effects following microphase separation were monitored along the film thickness by exposing dynamically thermo-compressed films to nitroxide spin-probes.

Use of inverse gas chromatography to determine thermodynamic parameters of aroma-starch interactions.

Interactions between aroma compounds (d-limonene, ethyl hexanoate, octanal and 1-hexanol) and high amylose cornstarch were studied using inverse gas chromatography. Free energies of adsorption (deltaGa) and enthalpies of adsorption (deltaHa) of aroma compounds on starch were measured in the temperature range of 33-40 degrees C. The results showed existence of interactions between aroma compounds and starch, involving hydrogen bounds and dipole-dipole interactions.

Optimization of headspace solid-phase Microextraction (SPME) for the odor analysis of surface-ripened cheese.

Fifty volatile compounds of surface smear-ripened cheese were detected and identified using headspace solid-phase microextraction (HS-SPME) and vacuum distillation coupled to gas chromatography-mass spectrometry. Changes in the headspace of aroma compounds were monitored over the whole packaging period (47 days) using the HS-SPME method. Initially, the concentration of methanethiol increased before reaching a plateau.